Media Server :: PHP Shown In Browser As Text On FMS Apache
Oct 22, 2009
We have several small websites, some with limited php and some with small mysql databases and we are planning on running Flash Media Server as well all on one RedHat server. I have installed the FMS and apache as per default installation and all is working ok I see the sample videos and have added some of my own videos. I have added some content under /opt/adobe/fms/webroot and this appears ok.
I have 2 flat sites called mysite1 and mysite2
Apache is installed as the default install on linux under /opt/adobe/fms/Apache2.2.
I have installed php php -vPHP 5.1.6 (cli) (built: Feb 26 2009 07:01:12) Copyright (c) 1997-2006 The PHP GroupZend Engine v2.1.0, Copyright (c) 1998-2006 Zend Technologies
I have the following in my httpd.conf file and this seems to work ok for the virtual hosts in apache as I can see these sites
NameVirtualHost *:8134
<VirtualHost *:8134> DocumentRoot "/opt/adobe/fms/webroot" ServerName myservername
ErrorLog /var/log/httpd/error.myservername.log .....
But when I go to look at a php page all I saw was the php text. So for example I go to [URL] page appears fine, when I go to [URL] all I see is the php text. I looked at the php.conf file from another server and I noticed that it used modules/libphp5.which is not available on this copy of Apache so I am not sure what I need to do to get php running on the server.
View 1 Replies
Similar Posts:
Jul 7, 2009
I have installed the FMS 3.5 Server on a separate IP from our main Apache Server: The server is running Redhat Linux 2.6.18-128.1.10.el5
FMS 3.5 running on ***.***.**.138 using ports 1935, 8080 (Admin Server using port 1111)
Apache 2 running on ***.***.**.139 using port 80, 443. (several sites setup on this IP)
However, when accessing the fms_adminConsole.htm in the root directory of one of the domains on ***.***.**.139, all login attempts fail. I am connecting to localhost and using the assigned user and password set up in fms.ini. Using either IP fails as well. The FMS server is set up to listen to all hosts as no specific IPs were set.
/var/log/messages show that FMS and the Admin Server are up an running and listening:
Jul 7 12:15:37 228215-web1 Service[28196]: Server starting...
Jul 7 12:15:37 228215-web1 Service[28196]: Server started (/opt/adobe/fms/conf/Server.xml).
[Code]....
All other settings for FMS are default. This is my first time setting up FMS as a fresh install on a new unknown server and I am at a loss as to what settings to check or which files I may need to modify to get it to connect properly. It is a managed server is hosted by rackspace.com if that makes any difference.
View 5 Replies
Sep 28, 2009
Right now I do not have "server". Example: I do not have anything like windows sever 2000, 2003 etc. but I have and running IIS server on the same Windows XP Pro. On this very same machine I installed FMS server with the Apache that came with the FMS. I have read and followed the instructions time and time again in deferent ways to deploy my video on the server but no idea I used is working so my clients could view my videos. Looking forward to have site like "hulu" / "You Tube".
View 1 Replies
Jun 17, 2011
Does is matter what HTTP server I use?In the process of upgrading from FMS 3.0 on Windows using IIS 5 to FMS 4.0. Will dynamic HTTP Streaming work from a Windows server?
View 1 Replies
Sep 19, 2011
I installed the FMS 4.5 on a debian system already running an apache web server. I configured the httpd.conf as mentioned in d6093a7e2f8312a374a1bde-8000.html but when i call a streaming url e.g. http://<IP>/hls-live/livepkgr/_definst_/liveevent/livestream.m3u8 the request is still handled by the old apache, not by the FMS
View 9 Replies
Feb 25, 2009
I have installed FMS 3.5 on a Linux root server with openSUSE 10.3 without included Apache 2.2. That is why the webserver is already installed and running. Now I should know next steps to configure both FMS and Apache to make it work for streaming recorded .flv files via HTTP and the VOD application. Starting Apache manually after FMS server is running always ends up in failure and error message: 'Address already in use. Could not bind to address [::]:80. If I start Apache first and then FMS server everything is running. But I guess this is not correct because the manual mentioned first starting FMS server.
View 21 Replies
Dec 9, 2010
I have apache web server installed on linux with one ip and some virtual hosts. Can I install fms on this server?
View 1 Replies
Nov 29, 2011
I'm going to setup a web server for streaming h.264 video for flash player and ios device.I know that I need the vod with HDS and HLS, and I don't need real live stream recording.At this stage, I have configured my apache server and use modules in FMS.I have referred to this document,[URL]It seems works fine now.Because I don't need to use FMS any more in my environment, what's the limitation I need to concern in terms of license, performance, etc. ?
View 4 Replies
Feb 27, 2010
I have fms 3.5 installed, i did not install Apache because i already have iis7 running. how do i configure fms with iis7 to allow for http tunneling/streaming when rtmp is blocked?
View 3 Replies
Aug 7, 2009
add php and mysql to fmis with apache?
View 1 Replies
Jun 8, 2010
Has anybody experience to install FMS 3.+ Apache on the same machine with IIS7. Our business department decided to save some money on hardware and we have to install FMS on production, where we have already hostted ASP.NET WebSite. We have to do steaming video on our ASP.NET pages. I think to configure FMS on ports 1925,6000 instead of 1925,80. Will it be ok for Apache? Actually, I tested the installation with this configuration on our testing enviroment and it works, but the funny thing is that I can put rtmp://111.111.111.111/vod/sample.flv works (without port 6000). Is it correct behavior?
View 3 Replies
Sep 20, 2011
Trying to use hls on an exising Apache server on Ubuntu following the instructions listed here:section: Use an external Apache HTTP Server for HTTP Dynamic Streaming and HTTP Live StreamingCopied the .so files to apache's module library, updated conf file, restarted apache. Now, it seems to work when requesting a m3u8 URL, but looking at the apache error log file, getting seg faults across all virtual hosts.
View 6 Replies
Jul 26, 2011
I have Flash media server 3.5 and it is working fine but now a days Apache service is automatically stoped so all streaming services is stopd then i restart the Flash Media Server after restart FMS goes smothly and all streaming services goes smothly.ut this issue, below are the event viewer detail wehere the appache service stop detail is mentioned.
here is the event viewer details for FMS
Event Type: InformationEvent Source: FMS (Master)Event Category: (258)Event ID: 1413Description:C:Program FilesAdobeFlash Media Server
[code].....
View 2 Replies
Sep 15, 2011
1.Have a Flash Webpage under development designed to permit preview and streaming of FLV video.Downloaded FMS Developer as a test server on my computer.Apache 2.2 loads with it with a checkbox option to install it or not. I'm able to stream my video OK in this setup using RTMP://localhost and the FLVPlayback component in Flash Pro.I like some of the OSMF players better like the one in the FMS Start Screen, but I haven't been able to integrate/embed it into my Flash webpage using the HTML provided.They say just paste it to the webpage, but in ActionScript how do you do that?how to embed Strobe Media Player into an FLA webpage using their HTML.
2.I plan to use PayPal Express Checkout for Digital Goods (EC/DG) as my pay facility on the Flash webpage. My videos will play to a cuepoint and then jump to a PayPal button which executes (EC/DG) .I'm having trouble integrating PayPal with my Flash webpage. There's a lot of online help, but most solutions involve PHP. I bought the e-book, "Adobe Dreamweaver CS5 for PHP" which recommends downloading the XAMPP platform which contains Apache, PHP, MySQL etc.
(a) If I use the XAMPP software, as recommended in the Dreamweaver book, do I have to first uninstall the Apache that comes with FMS? I assume you can't have two Apache's running at the same time.
(b) Is FMS the Server or is Apache the server in the FMS installation?
(c) Does the Apache software installed with FMS include PHP and MySQL, which seems to be required for any server-side coding?
I want to use FMS with Amazon Web Services to implement my Streaming Video Project, but I'm not sure I can do it with all the problems I'm encountering.Two final questions:
3.Why would I need Flash Builder if I have Dreamweaver?Don't they do essentially the same thing?
4.I'm trying to do in 1 and 2 above just using ActionScript and JavaScript, which I understand is just Server-side ActionScript?
View 7 Replies
Dec 14, 2011
I need to upgrade FMS 4.5 for HDS/HLS streaming. I am using Server 2008 and I need to use IIS7 port 80 for legacy web sites. I would like to configure in fms.ini using ports 1935 and 81 and Apache requests to port 8134. Can I use this configuration? Do I need to open ports 81 and ports 8134 in the network? What is recommended in this case?
View 5 Replies
Mar 30, 2012
FMS 4.5.1 Windows 2008 SP2 (64bit).We are deploying Adobe Flash Media Server 4.5.1 on a new server but Apache does not work (does not serve html files or stream Quicktime H.264 files).Assorted Problems & Error messages:
1. The webroot/index.html page loads locally, but the HLS/HDS streams result in a 2032 error.
2. The webroot/index.html page does not load from external locations:[URL] (does not load externally).[URL] (our old server, FMS 4.0 and Windows 2003). Everything on this server works, the 2 major differences being that it is running FMS 4.x on Windows 2003.
Some RTMP streaming works externally and internally (f4v files):[URL]FMS does not stream Quicktime H.264 files even though f4v files work.New server (does not work): [URL]Old server (Quicktime/H.264 file works):[URL]Apache does not serve Quicktime/H.264 files: I made sure that Apache had all of the correct mime types specified.
Error messages and attempted solutions:Apache's erro_log file: a. httpd.exe: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
2. FMS master.log file
a. FMSHttpd -k start returned 1: [URL]1a: Edited httpd.conf file to include ServerName 63.116.232.5
1b: The presence of this error message also indicates that Apache httpd was unable to obtain a fully-qualified hostname by doing a reverse lookup on your server's IP address.
In order for the server to accept external connections a reverse DNS lookup needs to be created. I created a reverse DNS lookup and edited the /etc/hosts file to include the IPaddress, Fully Qualified Domain Name (FQDN), shortname.
[code]....
View 5 Replies
Jun 10, 2009
I think I'm getting closer to the source of my problem.Let me outline my setup first (I'm using private IPs for example only). I have set two IP addresses to one network adaptor as follows:
CentOS 5.3 server running Apache 2.2.3 on eth0 with IP 192.168.0.78 <- working fine absolutely no problems at all
FMS 3.5.2 running Apache bundled with FMS on eth0:2 with IP 192.168.0.79
In fms.ini I have the following config:
ADAPTOR.HOSTPORT = 192.168.0.79:1935,80
HTTPPROXY.HOST = 192.168.0.79:8134
At (apparently) random times, the FMS Apache stops serving requests, but does not crash, and for some reason blocks requests to RTMP at the same time. Nothing appears in the log files which makes this even more tricky.I've run a test by shutting down apache as follows:
./httpd -f ./conf/httpd.conf -d "/opt/adobe/fms/Apache2.2" -k stop
and I expected RTMP to stop working aswell, however it continued serving up RTMP, which has led me to believe that something is then stalling the serving up of RTMP requests. This results in total downtime of all applications.
View 36 Replies
Dec 4, 2009
I configured my FMS for listening on port 80 and redirect non-FMS requests to apache on port 8080 in the same server machine. It works well, but I've noticed several tcp connections from fmsedge to apache in Established status (it is simple to see through "netstat -nap | grep 8080" command) that stay forever (until FMS stop or restart). With a sniffer capture I seen that sometime the fmsedge requests to apache a tcp connection but it (fmsedge) doesn't use this connection. Then the apache server send a syn,ack tcp request and always fmsedge send a dup ack tcp response. So, the connection is active but not used, then apache doesn't close it.The kind of requests for apache are http get to js or php files. I don't understand why fmsedge create these connections.
View 2 Replies
Feb 16, 2012
The Apache service named reported the following error: >>>[Thu Feb 16 17:07:10 2012] [info] mod_jithttp - FMS installation path: "C:/Program Files/Adobe/Flash Media Server 4.5/"I installing FMS 4.5 in windows 2008 r2 X64 ,but apache error ,pls help me? why?
View 2 Replies
Mar 28, 2012
We are trying to install our Adobe Flash Media Interactive Server. The problem we are facing is that Apache which comes with FMS is set to be run from /home/Apache2.2.21_x64 for some odd reason. Even though we install whole FMS to /opt/adobe/fms folder Apache still has /home/Apache2.2.21_x64 everywhere compilled in. Is there a way to change Apache root folder?
View 1 Replies
Oct 19, 2011
I'm trying to find in the documentation why Apache is required for the feature set that FMIS 4.5 provides. Is it that there are modules/scripts/other built in to that Apache build that make the features work or is it that Apache is simply pre-configured to work and provide these services?
If it's merely a configuration issue, is there an outline somewhere of the set up so I can mirror the setup with iis?
View 3 Replies
Jan 3, 2011
How can we get the browser name and version through which the current streaming is takes place?
View 4 Replies
Aug 9, 2011
Cen i communicate to FMS from browser not with swf. For example - by javascript from user side or by C# from IIS server side.
I need to built a live chat appliction where the swf only get the live streem and show it to the user but all the other logic code that communicate to FMS will be not in the swf and not in some *.exe file.
I need this because this live chat appliction will have to work on apple ipad and iphone soon when FMS will be able to stream to those devices and i will have to abandon the swf anyway.
View 1 Replies
Aug 9, 2011
Cen i communicate to FMS from browser not with swf. For example - by javascript from user side or by C# from IIS server side.
I need to built a live chat application where the swf only get the live stream and show it to the user but all the other logic code that communicate to FMS will be not in the swf and not in some *.exe file.
I need this because this live chat appliction will have to work on apple ipad and iphone soon when FMS will be able to stream to those devices and i will have to abandon the swf anyway.
View 1 Replies
Jul 23, 2009
Currently we have a swf file application that runs in a browser and takes the live video stream from the camera on the computer and streams a live sorenson spark stream to the fms 3.5 server.
Question is: How to live stream vp6 from the browser/swf file on the camera computer, instead of the sorenson spark. (We seem to be stuck only on sorenson spark).
View 13 Replies
Aug 17, 2011
I have a perl socket on my apache server that correctly takes input from sockets and sends it back out to every socket connected to the perl socket. I have tested the perl socket, and it works correctly.
When I launch the Flash in the IDE, as a flash program, it functions correctly with the perl socket.
However, when I try to launch the Flash in a Browser on my apache server, it tells me it is unable to connect to the server.However, I am seeing from feedback from my perl socket, the flash connects for about a half of a second, and thats it.
What could be the problem, do I have to include code in the flash to allow XMLSockets to connect in a browser as well? Is there certain things I need to do with my apache server to make it work?
Also if I 'Preview as HTML' from Adobe Flash CS4, it does not connect.
View 3 Replies
Jun 27, 2006
I've been through all the instructions and after running all the diagnostics through telnet it seems PHP is installed correctly as well as APACHE.When I edit the httpd.conf file however and add:
LoadModule php4_module "C:/PHP/php4apache.dll"
Apache fails to start once the httpd.conf is saved with that LoadModule request.It is in the specified directory.It is PHP4 on Apache 2.2. on Win XP.
View 6 Replies
Jun 3, 2010
My flash banner is a sliding show with navigation made in AS3.I've checked it after uploading in internet explorer, firefox, chrome and safari and i tworked fine. My colleague checked it on his pc in internet explorer and he couldn't see it at allIs there any script, which can remove blocking or tell the user to do it or update th ebrowser.
View 3 Replies
Jan 14, 2010
i'm developing a web site, and i'm trying to let the user record some video from his webcam. I'm using actionscript and flash media server. I got it work in my delevoper enviroment, but when i deployed it to the production server, the webcam can't get connected to the FMS. I'm afraid this is because of port blocking from the firewall. Does anyone knows wich ports are userd for recording from a browser by the Flash Media Server? I open the 1935 port in the Flas Media Server, but it still doesn't work.
View 19 Replies
Apr 14, 2010
We are experiences a phenomena that flash clients connecting to a live (pre recoreded)stream served from FMS (we use 3.5.2), have their buffer grow out of proportionit is alsoccompanied mostly with a complete video freeze, until the browser crashes.(you can expect a crash after having more then 4000 seconds of video buffer active in memory)The more we switch streams via a playlist,the more this seems to happen,Thus, streaming long video feeds keeps the system stable, but when injectingfeeds into a main stream and switching back increases the probability
View 7 Replies
