Media Server :: Start Broadcasting - Show Camera Control?
Mar 19, 2010
When user first time log into site camera start the capturing and stream is saved in application folder with the streamname (straemname.flv). then user logout and then logged in then i have to append that stream in same straemname.flv file .By this code i have done that task
camera = Camera.getCamera();
camera.setQuality(0,80); camera.setMode(videoWidth,videoheight,15,true);camera.setLoopback(false);
video.attachCamera(camera);ns.attachCamera(camera);ns.publish(stream, "append");
when user again logged in ,the video which is saved previously start playing,I dont want start that video.I just want to show camera control
I have a video capture device on a machine. I have written a windows application to capture the video from this device. While capturing, if i try to broadcast using flash it does not connect. If i'm already broadcasting and then try to capture then my windows application does not get the capture pin of the device. So, flash seems to be taking the capture pin. Is there anyway to broadcast using the preview pin on the device so that i can capture using my application. Or is there way where i can split the capture pin and give one to my app and one to the broadcaster
When user first time log into site camera start the capturing and stream is saved in application folder with the streamname(straemname.flv). then user logout and then logged in then i have to append that stream in same straemname.flv filey this code i have done that task
camera = Camera.getCamera(); camera.setQuality(0,80); camera.setMode(videoWidth,videoheight,15,true);camera.setLoopback(false);
We want to develop a broadcasting application, there would be a main broadcaster on video, with a lot of chatters. There would also be some chatters going on webcam (6 max). I'm still checking out NetGroups, IP Multicast, RTMFP Multicast, Fusion etc. but I am still lost. I also want to make sure that people who can't support RTMFP can be a part of the program by using RTMP, if that's possible right now to combine RTMP/RTMFP in such a big broadcasting application.
1- We want to radio broadcasting in cfm server. Do we need also install fms 2- We created a flash player as radio online player. Our problem is, when anyone open the player link, they must listen the same song at the same time. Is there any article or any advice about that ?
we would like to purchase Flash Media Interactive Server 3.5 to solve the following problem
1.Broadcast network internet lectures on a paid subscription,with the possibility user authentication.
2. Broadcast video and audio.
3. Broadcasting from several sources (1 camera, 2 camera, TV tuner, etc.)within a single stream with the possibility of the user to choose the viewing source, other sources at this time, you can view the preview.
4. The intended audience for 10 000 users and more. 5. Estimated flow rate of 1 megabit per second.
1. Is it possible for broadcasters to use a single server, or they need more? What configuration? 2. Does Flash Media Interactive Server 3.5 multicast? 3. How to make the system user authorization? Additional software, plug-ins? 4. How many users can simultaneously connect to the broadcast Flash Media Interactive Server 3.5 and how we calculate the bandwidth and outbound traffic?
I am running a website similar to Ustream and Justin and i am using Linux dedicated server, that have FMS 3.5 Installed. On My site registered broadcasters can stream their live video.
I want to know how can i limit the broadcasters so that they cannot broadcast a live video more then 512bitrate in their encoder.
currently any broadcaster can broadcast a live channel at any bitrate he wants and that is consuming too much of my server's bandwidth.
I'm trying to create a FMS application that is broadcasting some data across connected clients using SharedObject. I want only the Application to be granted to set SharedObject properties.
usually i do Camera.getCamera but when this method is called the user is prompted with a dialog box where he can choose to allow or to deny the application access to the camera, or he could not have a camera
how can the application now whether the camera is broadcasting ?
How to detect camera is in use or not? Adobe says, if Camera.getCamera(); returns null, it means camera not installed, or in use , i use below, then when i start swf, first one is ok, but then i start new instance of app, it throws and error " .... flash 10 r2has stopped" how can i solve that problem...
How I can use ip/network camera with Flash Media Server.I am not able to configure it.Is there any other way of configuring such cameras ?I want to publish live stream data captured by ip camera on Flash Media Server.
I've been chased a lot of things, but so far not found anything very practical, such an example that makes me understand the workings of Flash Media Server, something like transmit, share my webcam or camera!
Sets the camera capture mode to the native mode that best meets the specified requirements. If the camera does not have a native mode that matches all the parameters you pass, Flash Player selects a capture mode that most closely synthesizes the requested mode. This manipulation may involve cropping the image and dropping frames.Does it mean that the frames captured is not necessarily the same as required by setMode(width:int, height:int, fps:Number, favorArea:Boolean = true) ? The actual frame captured may be either wider/ narrower,higher/lower in size and have higher/lower frequency than required ,is this true?
i have problem with publish with fms.i have a song play in back i have microphone to sing and camera when publish in mp4 the voice is ok and camera good. But the song play in background dont have good quality.
1- can i separate voice and song in my microphone? if yes do you have an exemple? because the sound o f voice is ok but song in background not good
2- else can mix my original song mp4 to camera and microphone? and publish record all with fms?
i am building an live streaming website and i am use
1- FMS 2- Apache webserver
i have made the subcriber and i works well .but i need to build the publisher to allow users to broadcast thier stream from thier cameras.i have tested a publisher which was build using actionscript and it didn't work untill i have installed the fms on my localhost , but i need a publisher which any user can use in his web browser .
I'm not sure if this is the appropriate place to post this, but I was wandering its possible to build your own Player in Flash? The situation is: I have an external digital camera, and i need to capture its contents and display it in a player/window. This will all be on a local machine. I don't need to record anything, or stream it to other machines..... I just need the player to be able to display what ever the camera is displaying. Kind of like the Live Encoder (input and output views). With that I could hopefuly embed the player into other applications.
I have a delicate question for you which i cant find an answer to.Problem:I want to add an object (lets say it's a logo) to a camera stream before i save it to the FMIS. So the logo is integrated with the camera as it would have been placed in a layer above.Is that possible and if it is, how do i do it? It is quite urgent so any quick tips or solutions are more than welcome
I want to publish camera over FMS. But I don't want to use adobe security panel to be displayed(not even once) with setting as "access" by default.I wan't to set it allowed programatically.
I learned from some previous post that the default encoding format used when you publish the camera from a Flash player is Soreson. I'm wondering whether it is possible to select to use other codec such as VP2 or H.264?
I know the FMS is good for streaming things video to clients and for clients to publish videos from their attached camera. Is it possible for a client to publish something other than a stream from a connected camera, for example, the contents of my swf stage? Is it possible to draw something like a text overlay onto a published stream?
I recently upgraded from FMS 2 - FMIS 3.5.Over our internal network videos stream like a dream!However, accessing them from outside our own network means that they take about 20 seconds to load, or sometimes just get a message saying the server isn't found.This wasn't a problem with the FMS2 and there have been no changes to firewall settings or anything like that since the old server was up and running without problems.I have the new server set to use exaclty the same ports, but wonder if there are some other settings which could be causing this?Networking isn't really my area of expertise, and I have no idea where to start looking to improve things.
So I have a FMS 3.5, which I want to do live streams. The thing is I want several different people to be able to do the live broadcast, and I would like the server locked down at least a little and not allow anyone that wants to, to start a broadcast. With that said, I have FMS 3.5 installed, and I installed the Authentificaiton Add-In (3.0). I added a user to the authentification add-in, but it's still doesn't require a username / password, doesn't even prompt me.
I'm completely new to FMS but a seasoned Flex developer. We're building a Flash Builder 4.5 application which will be deployed to iPads. The basic functional requirements are as follows:
1. Presenter in a room has a camera streaming video of themselves2. Participants in the same room have an iPad - there are 30 participants and the stream is sent to all 30 iPads simultaneously.3. There must be lowest delay possible with good quality video - we understand this can be achieved with RTMP and that VP6 has to be used (as there is no H.264 support at present in AIR on iOS)4. The presenter will trigger certain things from their iPad which will then display certain alerts, content on the partcipants iPad (from server connection the participant iPads are listening to)
Firstly, I'm interested to know your thoughts on this current spec. This was put together from zero initial experience with FMS and having read a lot online and creating a proof-of-concept. Secondly, with regards to the two-way interaction: Is this something FMS handles? Previously I have used LCDS or BlazeDS for the data events & streaming aspects of our applications. Initially I was planning on using BlazeDS again, in addition to FMS. But from what I have read FMS possible handles data push too? Does FMS have LCDS/Blaze built in in some way?
