1- We want to radio broadcasting in cfm server. Do we need also install fms 2- We created a flash player as radio online player. Our problem is, when anyone open the player link, they must listen the same song at the same time. Is there any article or any advice about that ?
View 2 RepliesWhen user first time log into site camera start the capturing and stream is saved in application folder with the streamname(straemname.flv). then user logout and then logged in then i have to append that stream in same straemname.flv filey this code i have done that task
camera = Camera.getCamera();
camera.setQuality(0,80); camera.setMode(videoWidth,videoheight,15,true);camera.setLoopback(false);
[code].....
We want to develop a broadcasting application, there would be a main broadcaster on video, with a lot of chatters. There would also be some chatters going on webcam (6 max). I'm still checking out NetGroups, IP Multicast, RTMFP Multicast, Fusion etc. but I am still lost. I also want to make sure that people who can't support RTMFP can be a part of the program by using RTMP, if that's possible right now to combine RTMP/RTMFP in such a big broadcasting application.
View 1 Replieswe would like to purchase Flash Media Interactive Server 3.5 to solve the following problem
1.Broadcast network internet lectures on a paid subscription,with the possibility user authentication.
2. Broadcast video and audio.
3. Broadcasting from several sources (1 camera, 2 camera, TV tuner, etc.)within a single stream with the possibility of the user to choose the viewing source, other sources at this time, you can view the preview.
4. The intended audience for 10 000 users and more. 5. Estimated flow rate of 1 megabit per second.
1. Is it possible for broadcasters to use a single server, or they need more? What configuration? 2. Does Flash Media Interactive Server 3.5 multicast? 3. How to make the system user authorization? Additional software, plug-ins? 4. How many users can simultaneously connect to the broadcast Flash Media Interactive Server 3.5 and how we calculate the bandwidth and outbound traffic?
When user first time log into site camera start the capturing and stream is saved in application folder with the streamname (straemname.flv). then user logout and then logged in then i have to append that stream in same straemname.flv file .By this code i have done that task
camera = Camera.getCamera();
camera.setQuality(0,80); camera.setMode(videoWidth,videoheight,15,true);camera.setLoopback(false);
video.attachCamera(camera);ns.attachCamera(camera);ns.publish(stream, "append");
when user again logged in ,the video which is saved previously start playing,I dont want start that video.I just want to show camera control
I am running a website similar to Ustream and Justin and i am using Linux dedicated server, that have FMS 3.5 Installed. On My site registered broadcasters can stream their live video.
I want to know how can i limit the broadcasters so that they cannot broadcast a live video more then 512bitrate in their encoder.
currently any broadcaster can broadcast a live channel at any bitrate he wants and that is consuming too much of my server's bandwidth.
I'm trying to create a FMS application that is broadcasting some data across connected clients using SharedObject. I want only the Application to be granted to set SharedObject properties.
[Code]...
is there any example how to set up FMS so that it act like a radio station, and the connected users will hers all the same ? I have several DJ Mixes which should run cuntiniously and not on demand.
View 2 RepliesI have a video capture device on a machine. I have written a windows application to capture the video from this device. While capturing, if i try to broadcast using flash it does not connect. If i'm already broadcasting and then try to capture then my windows application does not get the capture pin of the device. So, flash seems to be taking the capture pin. Is there anyway to broadcast using the preview pin on the device so that i can capture using my application. Or is there way where i can split the capture pin and give one to my app and one to the broadcaster
View 10 RepliesWe've been streaming our campus radio station via FMS 3.5, and a WM server. Problem with both of these is we don't get a stream format that iTunes radio likes. We got close with creating an mp3 stream out of the FME, but we can't get the quality up the Anyone got a how to for FMS on creating an iTunes radio compatible stream?
View 2 RepliesI currently use FMS 4.5 to steam Live Technical Videos.
Hooked into Flash Media Live Encoder is a Roland VR-5 which lets me have multiple Camera switching.
I want to braodcast also a few live Audio only streams. I could easily use the VR-5 which in turn has a Behringer Audio Mixer attached to allow up to 16 Audio devices to be mixed in, and then just turn off the Video option in Flash Media Live Encoder but:
I don't want to have to put a video window on the Webpage. I just want an Audio controller.
So how can I use FlashMedia Server to just stream a live Audio feed?
I'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesThe company I work for installed FMS on a server running Centos for a customer who needed streaming media capabilities. It worked fine for 3 months until today the customer called us and informed us that their client program can no longer connect to the streaming media server. No one has done anything to the server to cause this to happen. When attempting to access the admin console to diagnose the program, the streaming server returned a 500 Internal Server Error. So I tried another page. Same result. Reboots of both the hardware server and the FMS have changed nothing.
View 5 RepliesOne server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
The instructions for installation only cover installation on "localhost". I'm wondering if I could use the development server for a small scale website depolyment with restricted traffic, from a commercial server, such as goDaddy?And if so, what''s the method? Do I download the package from Adobe to my local hard drive and install over the network, or copy the package to the server and install it online?
View 1 RepliesThe $995.00 version is listed as not supporting server side playlists. Is it possible to implement internet TV station like functionality using that version? I would like to have a list of files to play out and have it so those connected are all viewing the same thing.
View 1 RepliesI have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesI am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I need to move recorded media files at my fms account to some other ftp account. How can i achieve this through server side scripting.
View 2 Replies