I'm going to use a Flash template as the basis for a new website. I have loaded the Flash files into Flash but I would like to work individually with some of the graphics images in the Library and edit them using Photoshop or Gimp afterwhich I will udpate them. I can't figure out how to exports or copy any or all of the elements in the Library so I can edit them
RegEx for BMHT in a sequence is my previous post. I'm looking to build a number using abbreviations, and ofcourse using regex.
Now I know how to validate a number with BMTH abbreviations. Now my next and final target is to build a number using the abbreviations. e.g. -2T2H22.55 should be displayed as -2,222.55 -2M2H22.63 should be displayed as -2,000,222.63
I was working with the XML Photo Gallery Thumbnail Tutorial on this site: [URL] And I modified it for my own usage, making it a vertical gallery instead, and had no problems until I came upon the thumbnail images. When I replaced the original thumbs with my new thumbs (that I sized based on width, as it is a vertical gallery) it got all screwed up. The images are of all different shapes. So when it loads up, some of them had huge gaps in between them, and others were even overlapping. So I fixed it by making the heights of all the images the same, resulting in a working thumb gallery, but now half my thumbs are cropped off by the mask. I'm looking for a way to fix it where I still have the same spacing between the images, and that they are all the same width, but can vary in their height. Here's the section of the code I am using:
If you make multiple flash files from the same template and then edit that template, will all those files have those same changes? If not, is there a way to make the same change on multiple files at once? Basically the same idea as linking HTML files to a single CSS file...
Jesus Christ - I thought I was really good in flash.Got this template and I can't see S***. WTH - is it supposed to be this difficult to manipulate a template or am I stupid??? Go into project explorer and can't see much AS so how the hwll are they getting the images and text into the flash swf. By the html??? I don't think so.
I have a IT background and have been able to alter most of the template by myself to the design I would prefer my website to have. However I have hit a snag, it looks like part of the flash website design is controlled by bitmap images therefore I concluded those images were under the sources within the PSD folder. I tried creating a PNG file and double clicking the relevant bitmap and then updating it with the new file. However after I perform a publish preview the the change made no impact to the design.
I have built a template for a client that I would like to use for every page of the site. The problem, of course, is that the content within each page has to be changed. Ideally, I'd even change the layout; for example, some might have images, others just all text, others tables, etc.
I have this template that i am modifying [URL] Photo gallery i am trying to use[URL] when you click on any of the images the site reframes and then you see a xml text box i want to replace that xml text box with an xml photogallery but i am not really familiar with the language and its been a long time since i did any web work.
I am customising a Template Monster template that has a flash menu.When I changed the getURL code (using AS2) of my flash menu buttons they work for an external URL but do nothing in my site. EG.THIS WORKSgetURL("index.html");THIS DOESNTI have everything in the same root folder and the animated menu bar works perfectly in-situ, just wont go from page to page.
I have two questions (I'm a photographer and flash novice):
1) I just bought this flash template (URL...) and I need to edit it. Rewriting the text is easy, I just rewrite it in XML files, but I cant figure out how to change the font, font color and font size. Could somebody tell me how to do it?
2) I also bought this template (URL...) and I cant figure out how to edit name in the header and text in the top menu. I really cant find it anywhere (I dont see it in Adobe Flash and I dont see any jpeg or PSD file in the flash directory...)
I don't know why this is so difficult, but I'm unable to embed a swf generated in flash into a dreamweaver template. I can finally create a few basic animations and want to test them out in the dreamweaver envoirment. What is the simplest path to accomplishing this? For example if I open flash, create a simple animation, like a ball moving across the screen. If I save that SWF, what's the next step after opening dreamweaver. I just want to be able to test it the site with dreamweaver or see it "live".
I just purchased a flash template and can not seem to find where I place the logo. The template now has a logo in text, but I want to replace it with an image.
I downloaded a flash template for a website and it includes a looping .wav soundclip that starts automatically when the page is loaded. There is an ON/OFF button that stops it, then starts it again.What I want to do is change the soundclip to a soundclip of my own. The instructions that came with the template say that to change the music, all I need to do is change the sound_Bar movie clip.
When I double click the sound_Bar movie clip, and select the "music" layer in the timeline, in the properties tab I see the following options:
I've imported my custom sound to the library, but when I select it, the values change to this:
Name: NEWclip.wav Effect: -- (blank) Sync: Event (<-- I can't change this back to being blank) Loop
Anyways, what happens when I change the clip is that when I click the OFF button, the sound does not stop. Then if I click the button again to turn it ON, it starts the clip again, but overtop of the one that's already playing.Does anyone know why this is happening and how I can fix it? I don't really know too much about flash, that's why I bought the template pre-made...so far I've been able to edit everything else, and the music seems to be the last step but is giving me the most problems.
I am new to flash and i have .fla file of flash.i want to edit this file to use it.I want to change the buttons name and their hyperlinks in this fileI want to attach the .fla file with post but i don't know how to do this.
I've set up an application to print the current state of the control I'm using (in this case an ArcGIS server map), but I'd like to set up a print function that uses it's own template to print rather than grabbing the state of the application.
I've attempted to do this by setting up a flex component that lays out the items I want to print and instantiating it when I call the FlexPrintJob. Unfortunately, simply instantiating it results in getting a blank green square.
There are two main questions about this that I'd like to put out there. First, what needs to be done to print a newly instantiated template rather than just grabbing already existing controls from the screen? Second, for more controls that need to load complicated data from multiple sources, like an ArcGIS map, is it possible to instantiate them in that kind of environment, or is there a way to take an image of the control in the application and print that?
I am building an application template in FlashDevelop/Flash, to be used as the template for all our future projects. In a swc-free world, the template has a bunch of library symbols and a whole package of classes in the /lib/ folder that run the whole thing.
What I would like to do, is package all that up into a single swc, so the team can checkout the latest build of the swc from svn at the start of a project, put it in the /lib/ folder and forget about it.
However, all attempts to do this have failed so far. Is it even possible to put everything into one swc?
I am not an AS3 guru but recently I started learning AS3 and write code to build a website for my digital photography content.Of course, you can argue, why not get a ready-to-use template and go from there. However, I wanted a website with flexibility and tailored to my needs and one that can be easily updated and scalable.The question I have is in regards to the design patterns in AS3. I have created several classes that create for example photo galleries, and then use photo viewer class to display photos, etc.However, as the code is growing and more and more instances of different objects appear within my code all over the place i am starting to loose track of how to communicate between objects and what would be the best practices for building a photography website.I read about Factory Method Pattern and Singleton Pattern as well as MVC, and seems like MVS Pattern would offer the best way i could build the website.
I don't know where to find it, I purchased a file that is a Flip Book done in AS3, the author of the book made a table of contents that requires me to type the pages and page numbers in the xml and then it creates the buttons, I want to be able to create my own buttons in order to create my own table of contents,
I am using a flash template with an xml file. I am trying to replace an image with a .swf file. Is this possible? And what tags do i use to replace the line below with a flash .swf in place of it? <image url="images/pic3.jpg"> I just want it to be a flash movie on top of a flash movie instead of a pic.
i've got problem with adding a button to a template, so by default there are 4 buttons.i've localized in source move clip with buttons and animation, i've copied one of them and pasted, then i've changed the name from item for to item5. the data for buttons and web pages displayed by them are from the xml file, which code i attach. the problem is that even if i added 5 section [with the number 5 in systemOrder) the webpage doesn't display this content correctly, sometimes taking the value of previous button and sometimes showing just main frame, and instead of elements and texts from xml it shows "Undefined". I've search all the source using movie explorer and i havent found anywhere else connections with item4 / item5.
akie ilosci kodu, ale mysle, ze moze to pomoc albo byc wrecz wymagane. na topie typowo action layer, pod nim label layer [to te s0 s3 itd.] oraz event source, a pod nimi wszystkie pozosta necessary. on top there is action layer, under lablel layer [the one with s0, s3 etc.] and event source, and under those all the rest.
Im a relative novice in Flash and Im used to working in CS3. However, I am trying out CS4 to do a change a template that a client bought. Everything is going smoothly for the most part.However, I am not able to change the tab names on the template that she wants. I expected for the text to be on its own layers as seperate rollovers, but I guess somehow they are nested within the button shapes and I cannot locate them. I've been trying to change them for the past 2 days and I have had no luck thus far.I know you guys are some of the best when it comes to Flash. Here is the working template and what I have done thus far. I was able to change the girl's eye color from blue to dark brown and change the default title that came with the template to the name of her business:
I don't mean to impose on people who actually know what they're doing, but I'm trying to find a template of some sort, free, that provides this effect:[URL]..
It's nothing commercial, I just want to use the flash effect as a screensaver (a la InstantStorm). I've been wracking my mind trying to find a screensaver with that effect,
I tried to search but was unable to find. Just to see if I was publishing incorrectly I took a stock flash 8 template and uploaded it to my server putting all files and directories exactly as they were on the local version. Same result as my published version. Works perfect on my pc when I click the index.html file. All loads smoothly and template works perfectly.But when I load the same template onto the server via filezilla (all loads fine and the file sizes appear to all be correct). All I get is blank page on screen and says done in bottom of page. (Mozilla)SO, on IE I get page error and nothing loads. On mozilla I get nothing at all just blank page and at the bottom it says done?
So I guess what I am asking is: Is there something that I am missing when uploading a flash8 template straight out of the box. No edits no changes just upload to see how it looks from the server?NOTE: On same server I loaded a FULL FLASH template that I even made some edits on and loaded it partially finished and it worked fine. The other template in question is a flash banner template I tried from the free downloads section of template monster (Its the one with the green apple split into sections and stacked off center) couldnt find a name for it or template number
Immediately after finding out I was laid off I began to try and increase my online presence by building a webpage.I found a flash web template that I was able to highly customize however I can't figure out how to add additional hyperlinks, images, etc. This crosses the line between dreamweaver and flash. The flash file is a complied file that flash creates and I can only edit it if I have all the original files (kinda, there are other ways around that). Anyways, I have all the files, I think however I still can't seem to figure it out.
I would like to add additional images, hyperlinks, and maybe even move some stuff around however it seems like everything is either locked down of difficult to modify. I have looked around online for some good tutorials however I can't seem to find any that match what I'm trying to do. Would it be best to try and build the hyperlinks in flash or should I do that in dreamweaver? Dreamweaver I'm guessing, however since I'm editing the site via .xml the insert hyperlink capabilities within dreamweaver are not enabled unless I'm directly editing the index.html. By the way, I'm using CS4 Flash and Dreamweaver. [URL].
I'm looking to extend Vector.<T>, but it's final, so I'm going to have to include it as a member instead.Regardless, I'd like to make the wrapper class type independant, so I was wondering what the snytax for template classes are.
I have never messed around with flash before so I downloaded a template. I open it with Flash CS4 and most everything is simple to edit. The problem is I dont seem to find anything about editing the menu/navigation bar.
I have Flash MX and I'm editing a Flash template that I downloaded. When I roll over what would be the button section in this template it is set up to be a link, but I don't know how to edit it and add the links I want. how I can get links added into this thing? I can send it to you if you want to see what I'm talking about first hand.
So I have basic flash knowledge but not to much. I'm editing the majority of the template perfectly. When I want to test out how the changes are I export the it into a flash movie, than click on the index.html (which is linked to the flash movie) everything works fine.
Here is where the problem comes in, on one of the pages the template had a bunch of link that I do not want so I delete the links layer. When I do that and export the movie agian, everything gets screwed up it like flips out when I open the file and runs everything double speed than shuts down.