Professional :: Cropping A Flash Document?
Dec 1, 2010
I recently made a flash document with animations and some AS at 1600 pixels wide. It turns out that my web developer is having trouble using the file and would like it cut down to 1200 pixels wide. I can make the document 1200 wide, but then everything is off-center. Is there any way that I can crop it to 1200 my taking 200 pixels off of each side instead of just 400 off of one side? If not is there an easier way to just select every layer and tween at one and move them over
View 1 Replies
Similar Posts:
Apr 1, 2010
I've read through umpteen Flash threads of frustrated users who export SWF and anything visible outside the stage appears in the SWF when opened in a browser.None of the solutions have worked for me.My file is called statement_onlineheader.fla.URL...I have my mask layer above a folder containing all other layers.I have also tried moving the mask layer above individual layers.Stuff outside the stage appears in the exported SWF.
View 5 Replies
May 2, 2010
SO I am working on animating a 20/fps sprite (an SCV from Starcraft 2). The animation is 1 second long, and thus 20 frames. I have made a sprite sheet in photoshop, and have each frame as a separate layer. I import the PSD into my library and have it convert the layers to "Flash Frames". I get each frame nicely tucked away as a layer in my library. Problem is, it gives an ugly white border (about 1 to 2 pixles thick) around my sprites, making it look like I did a terrible crop job. However, the crop job is fine (I can change the background in the PSD to black, and the cropped sprite frames look perfect! What have I done wrong or need to do?
View 1 Replies
Jun 15, 2010
I have a Flash file that is displaying .xml text. I would like to create a hyperlink inside the text area.
View 1 Replies
Jan 29, 2010
I wrote a collision detection class that works off using BitmapData.hitTest. Basically, every update, the .draw method is called and then two BitmapData's are hitTest'ed against each other to see if there is a collision.It works pretty well, however if I start rotating the source MovieClip I use for the BitmapData, the transformations don't get registered in the draw method. So what I did was pass through a Matrix in the draw method. That works. But here's the actual issue. If I output the BitmapData to a Bitmap on the stage, I see that Bitmap is, in fact, rotating, but now it's exceeding the bounds (width and height) of the BitmapData. Which is cropping / clipping the image of the source MovieClip.
UPDATE: Basically, when the Bitmap clone of the MovieClip rotates outside the positive co-ordinate space, it doesn't get drawn. It rotates outside the bounds of the BitmapData set width and height. I can multiply the bounds by 2, and then center the bitmap inside the set bounds, but then the origin point is never fixed and the object is always being moved around. Works pretty well, but makes aligning the object to any specific point impossible.Here's my isolated test code. It requires you to have a MovieClip on the stage named "iTest". I used a fairly vertical arrow shape (higher than it is wide) so I could keep track of rotations visually accentuate the clipping problem:
var rotateTimer:Timer = new Timer(10);
function rotateObject_init():void
{
[code].....
View 2 Replies
Sep 21, 2010
Right now my stage dimensions are 980 X 800 px. I need to cut or "crop out" the bottom portion of the footer because its height is too long. So I changed the stage dimensions to 980 X 600 px (and changed the corresponding dimensions in the embed tag in the index.html file to match). Doing this seems to cut out the bottom but at the same time adds space to the top and seems to distort the overall spacing. Is there a simple way to crop out the bottom of the stage (just like cropping out a section of a photo)?
View 5 Replies
Nov 13, 2007
i'm making an "EBook" for my GCE in applied ICT and i want to use a Flash handler to view a PDF document. So far i've converted the PDF file to images and Imported them (on the fly encorperating XML). while this was an alright way to work the images become pixelated when zoomed in/out so i was wondering if anyone has done something like this before and if so how they went about it?
View 2 Replies
Apr 2, 2010
I have a question about a library one would create inside a Flash document. I have a bunch of pieces of graphics objects inside a library for a FLA file. I then drag these pieces onto stage to build a more complex object. I then select all those pieces and group them and convert this new object into a movie clip. From there I move it into the library for that FLA file. I notice there is both a graphic for this object plus the movie clip for that object. To me these are 2 separate objects. So when I delete the graphic of the object, it also deletes the movie clip I created of the object.
View 5 Replies
May 4, 2010
1. I am creating a Flash banner to go at the top of my website that is going to animate the name for the site one letter at a time. I have this part of the banner completed as a movie symbol that I have added to my main timeline. What I was wonder is if it is possible to set a timer or some type of pause for how long I want it to wait before looping again? I dont want to stop the looping all together but would like to maybe make it pause for 5 minutes or so before starting animation again. Keep in mind it has to be done within the movie symbol becuase I have other animation going on the main timeline that will just continuously loop.
2. Is it possible to set a flash swf to the background of a html document? The reason I ask is again with my banner I am creating I have a menu bar that is about 3/4 of the ways down the height of banner. I want me primary animation to be able to move behind this menu bar. I realise I can make the menu straight in flash adding my links directly to it, but I would perfer to handle that in straight html or whatever if possible.
View 1 Replies
Jun 29, 2010
I have upgraded my CS4 to CS5 on MAC OSX and i'm having problems saving new and existing fla files. It doesnt always do it but it's very anoying when you have done some work and are unable to save it.
I get this message:
unable to save document as (file name)
please try saving to a different filename or location.
even if i try to save as to a different location i get the same message, this ONLY happens in flash CS5 and does not do it on any other application or even flash CS4. To put it bluntly i am absolutely furious with this and when you pay this amount of money should not get this hassle for such a simple action.
I have tried phoneing the adobe support line and it's a joke, you can't even understand the operator to even get anywhere and i just gave up having to repeat myself and asking them to repeat themselves.
I would be grateful if someone out there knows an answer to this or have a contact email for adobe support that i can email them direct. As a flash developer it's critical i can get on with my work without worrying if my work will even save.
UPDATE: I can save files in CS5 as CS4 documents but not as CS5, this is so annoying.
View 43 Replies
Jul 15, 2010
Is there a simple way to scale my entire movie? I've tried doing it with the "modify -> scale" and dragging, but that only scales the selected symbol. I also tried going to the last frame, selecting all and scaling again, but then I have stuff in the middle of the movie that doesn't seem to scale correctly.
View 1 Replies
Mar 11, 2011
Here is my idea:Create a new document with 4 keyframes in the main timeline.The first one will accommodate the title and two "play" buttons (each allowing to play a game). The second one will contain the first game. The third one will contain the second game. The last keyframe will contain the scoresEach game contains a movieclip that is being controlled by a main class that I wrote using as3.0. For example imagine that one of the games is a simple rectangle that the user moves with the arrow keys. The motion code is inside the main document class. The second game is something similar
View 1 Replies
Apr 14, 2011
I have been working on a flash website inside flash CS5 here at school. I have been working for almost 3 hours with no problems and I have made sure to save from time to time. I have saved with no problems. My problem came when I clicked on test movie. As the movie was loading to test the SWF of the website flash crashed and closed out on me. I had just saved before testing so I could have the latest saved. I double click on my flash document to re-open flash and I get a message that says "Failed to open document."
Right after the message it lists the folder where my file is located. I still cannot get past this message and my file is a website I have been working on for over 3 hours now. I needed this for school and I guess if I can't fix it I will have to start from scratch although I had so much work completed. I even tried to open flash first and then go to file open but that did nothing except give me the same error message. Then I looked under recent documents and clicked on the file document and got the same thing.
View 7 Replies
Jul 2, 2011
Is there a way to easily way double the size of the entire flash document?
View 1 Replies
Mar 16, 2012
As i am developing a website for my semester project, i need to add some flash contetn in the website.here is the link, [URL]...
View 3 Replies
Jul 29, 2006
I'm bringing in production art into Flash, and it's shifting getting lighter. I've read all about the issue, how it's
photoshop's color profiles, etc. Problem is, converting the images to working RGB isn't helping. I've tried converting them (originally they were in Adobe 1998 RGB) , creating a new document with the correct profile, but nothing works. I'm saving them out as PNG files. They look great in a browser even. Just washed out in Flash. Anything else I can try?
View 4 Replies
Jan 14, 2010
how to increase the work area of a flash document? Not the stage but the empty space around the stage. [URL] It seems to be limited to about 4,000 pixels wide regardless of the zoom level. This is a big problem for me as I'm working with a movie clip with a width of 8000 pixels and if I want to add text to part of the clip that's at 6,000 pixels in, I can't see it because its outside the work area. I can't shift the clip to the left to access the part on the right because if I do, the text area doesn't move with it. Is there any way to link objects together? When I select multiple items on the stage and Right Click, there's an option called "Break Apart" but I don't see one to join them or link them.
View 5 Replies
Oct 27, 2010
I have a reproducible error: I am being forced to fix corrupted flash files that give the "Flash can not parse this document" error. But shortly after I fix the problem, the files are re-corrupted.
Here is how the problem is reproduced: when I update a custom component that is used in other symbols in the library. When a new version of a custom component symbol added to the library, replacing an older version, the symbols that contained the old symbol are corrupted in the XML. This is tedious and time consuming to work around.
View 2 Replies
Apr 7, 2012
have doing my project in flash cs5.5. But then suddenly my file cannot open it.It appear like this "an error occurred opening file C:....menu.fla" and also "Flash cannot parse this document." "The following JavaScript error(s) occurred:".
View 1 Replies
Aug 12, 2010
Is there a way of getting the current active document path from the flash application by AppleScript? The only command available in the Adobe Flash dictionary for applescript is "do script", can I call a script to get the path of active document?
View 1 Replies
Mar 14, 2002
Is it possible after embedding a flash exe in to PowerPoint document that we can make flash buttons tell the ppt document to go to a certain slide.
View 2 Replies
Jul 29, 2010
Within my flash file, some of the layers/objects go off of the sides of the document as I want them to. When I play the file within the test movie function within flash, the file plays fine and none of the layers that extend of the document cause problems(the samething happens when I play it in flash player). But when I open the file in a web broswer the layers that extended off the edges of the document show up. Is there anyway to get rid of this without having to redo the whole file? (ie, crop around the main document size, or set it to export only everything within the document and nothing that extends off of it?)
View 1 Replies
Jun 14, 2010
I have downloaded a nice Flash Slide show file (.SWF) and would like to use in my Flash CS4 document without any modification (as it is). How can I use it? There is no .Fla file this Slide Show. It just works using xml file.
View 2 Replies
Dec 16, 2009
We have a requirement to show documents (if we have URL for a document) within Flash. We have a need use embedded document viewer for MS Office and PDF documents. Are there any Flash controls available to acheive this?
View 2 Replies
Mar 15, 2006
I m building a site whit transparency so my background HTML can bee viewed, at some point I load a movie on level1, it's supposed to bee smaller than the Level0 movie but instead I end up getting flaps on the level0 movie because the original content of the level1 movie sticks out, I can't put a mask for it will occlude the HTML background, and it doesnt matter if I keep shortening the loaded movie it still shows up like it has a mind of its own...
View 3 Replies
Mar 9, 2011
The Camera video is played well in other applications, but when I am using Camera in flash applications to play the live video, then video is cropped.
View 1 Replies
Jul 7, 2010
How is cropping/clipping accomplished on a Sprite in Flex?
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" creationComplete="Init()">
<mx:Script>
<![CDATA[
[code]....
Notice that the lineTo completely leaves the UIComponent and Panel.How can I cause my UIComponent or Sprite, Or Panel for that matter, to be cropped/clipped? I realize I could just change the hard-coded 2222's to something more reasonable, but I need a generalized solution to this, since the actual project doesn't involve hard-coded values that I can alter, but works with dynamic data.
View 2 Replies
Jun 4, 2008
Does anyone know of a way to crop out whitespace/transparent pixels in a BitmapData object? I've got this movieclip I'm rendering that has a huge amount of whitespace all around it. I'd like to crop all of that out before I convert it to a JPEG (with corelib). Is there a way to do this? I can't seem to find a way to figure out where the first opaque pixel starts on each axis to determine the extents.
View 6 Replies
Nov 18, 2009
Using DRAW I want just a part of the original image. I am using the "Rectangle" bit of the paramaters, but I can't get the start of the crop away from the top left corner.
Here's my code :
ActionScript Code:
import flash.display.Bitmap;
import flash.display.BitmapData;
import flash.text.TextField;
[Code].....
View 1 Replies
Jun 8, 2010
I want to know how can i make something like if any one scale browser my site will scale in aspect ratio without cropping
something like jimcarrey website [URL]
View 2 Replies
