Professional :: Inserting Link To Big Image In FLA
May 31, 2010I have a template and I need to replace the images, and then to add the big size image and to make a link between them.
View 1 RepliesI have a template and I need to replace the images, and then to add the big size image and to make a link between them.
View 1 RepliesI currently have a flv running on my home page which is about 5 minutes long. I am wanting to insert 'quick links' to specific times within the flv so that people do not have to watch it all they can quickly just click the lick and the flv will jump to that point.
View 1 RepliesI have a logo that I'd like to animate for a class presentation. The logo can be seen here: [URL]. I would like only the word LEAF to fade in, and then the blue portion to wind its way around (Starting at the gap at the top, going clockwise and finishing by revealing to two shorter lines in the center). At first I tried to mask the blue portion in segments, but couldn't figure out how to link multiple symbols together to mask the same image.
View 1 RepliesI've seen alot of instructions online on how to assign a hyperlink to an image. Alot of them say to convert the image to a symbol first and then add the appropriate Actionscript code (getUrl). I'm just wondering if there is a way to do it without converting it to a symbol (converting it to a symbol seems to add an artifact to one of the borders of the pic). Does anyone know if this can be done? Or must all images be converted to symbols to get links assigned to them?
View 2 RepliesI have recently launched a site for a client which includes an interactive flash element on the home page but it takes a long time to load (10-30seconds). I have followed advice from others about keeping image small and link movies rather than embed but still slow, the swf file is about 7.9mb which i thought was ok for the size of flash file. Does anyway else know where I have gone wrong whether it be the embedding or some other area.
View 5 RepliesI've been trying to figure out how to add a bone in the middle of an armature. Currently I have a bone from the neck to the shoulder, but would like to add an bone in between the neck and shoulder. Does anyone know how to insert the bone without having to reconstruct the entire branch?
View 1 RepliesI have been trying to insert flash file but I keep getting error messages that:
Not Found
The requested URL /annimations/Snow.html was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
I firstly publish flash into both swf and http files. Then, I opened view source of the http file and pasted the code onto the dreamwaever file.
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="[URL]" width="700" height="500" id="Snow" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="allowFullScreen" value="false" />
<param name="movie" value="Snow.swf" />
[Code] .....
In addition, I deleted code that swfobject.registerObject(FlashID) on the http file. The dreamweaver gave an error message that the code swfobject.registerObject(FlashID) can cause error when downloading the flash. Finally all http, swf and flash files were uploaded. But I still got the error message above. In the past, I managed to upload flash using the method above, although I did not get any message regarding swfobject.registerObject(FlashID).
I inserted video into flash movie. I loaded the .swf & .fla files onto a server and went into the properties in the flash movie and pointed to the server to pull the .fla file & the movie controls .swf file. I can preview the movie in flash with no problem. I am wanting to use the object code that was created as part of the .html file that was generated by flash and insert this into an article to display the video. I path the .swf file in the object code to point to where it resides on the server but the video will not play using just the object code. Is there a way to do this using just a object or embed code without the need for scripts?
View 1 RepliesI just scanned in 16 frames from old 16 mm film and created a short clip in .swf, by default the clip is looping. I want it to loop, but all I want to do is place a 5 second pause at the end of the short 1 second clip before it starts up again. I am using CS4 Flash Professional.
View 4 RepliesWhen I try to insert a keyframe in Motion Editor, Flash CS5 crashes.I tried to use two computers running the same Mac OS X 10.5.8 with the same specs and only one of the machines crashes.
View 1 RepliesI have created a small application which takes it's information from an xml file and displayes it in a news ticker which is a flash Flash AS2 application. tell me the correct way to format the link tag in the xml if there is a standard when wanting to state a target for the link? The xml file currently looks like:
<newsTicker>
<item>
<header>Test Message 1</header>[code]....
So what I want to do is to be able to open the link in a taget=_blank window however adding that to the end of the url does not currently work.I have added a comma and also tried using a space, space and encompassing in quotes but none are working.
I am trying to add a link to an image using ActionScript. I do not see the link no matter what. [code]...
View 1 RepliesI guess its probably a simple thing to do - but is there anyway to use flash simply as a link image? I have a link animation I would like to use after each url link, I have setup the code as but when clicking the flash file nothing happens, only when clicking the link text. I guess I need to turn off the interaction via a param, but cant find which to use.
View 1 RepliesCS3 Flash - Complete newbie to Flash and I'm trying to change an existing flash piece.It consists of 4 different text statements that appear on a Black background - the first appears and stays on-screen for 10 secs, then it starts to blur and fade away in about a sec, and then the next statement appears, etc, etc., and the whole lot loops.The 4 statements appear as Video Clips (Symbols?) in the library.I need to add a new statement, which means there will be 5 statements. I duplicated one of the library items and renamed it, which seems to have worked fine... but I cannot then work out how I insert that video clip into the Timeline and still have the same visual effects and timing as the existing ones? I can insert a blank frame, but then I can only drop the new video clip text onto that one frame.I've tried copying and pasting a whole set of frames, and then go in and change the text. Which I thought had worked, but then discovered that it also changed the original frames.... now understand that's because they are just instances and any change will affect the master Video Clip!
So can anyone advise if I can insert my newly added and renamed video clip into the timeframe and create the same effect as the others?Please keep any advice as idiot-proof as possible as this is my first venture into Flash... not finding it as intuitive as I hoped, spent 6hrs to date just trying trial and error without any real success.
How to put a link in a image in Flash CS4?
View 3 RepliesI have a pretty large which was coded using AS2 in about 2006 so I'm trying to make a few changes using AS2 which I'm pretty rusty on. I have a swf which loads an xml file into a textarea in flash and it all works well. I have to link some images which appear in the xml file but those images have to be links to external sites and that is where I am running into problems with my asfunction. Here is the code.
[Code]...
I recently bought this template: [URL] but I have a big problem. I want to add a hyperlink over the big images which appears when you click on bedrooms for example. There are 9 small images in the right side and 1 big image on the left. I changed all the images but I want also to add hyperlinks on some big images. The action script import an xml file like: <?xml version="1.0" encoding="iso-8859-1"?><root>
[Code]...
I'd like to call up a scene when an image is pressed. I understand, I think, where the image is located on xml and the fla/actionscript. Here are the corresponding parts
xml:
<image imageUrl="_pic16.png" link="asfunction:link"/>
actionscript:
[code].....
My Problem is that I Cannot Link an image in the clip. Here are my codes:
ActionScript Code:
SlideShow_mc.slides_mc["holder"].loadMovie(this["imageuri"], SlideShow_mc.slides_mc.getNextHighestDepth());
These are the error messages:
TypeError: Error #1010: A term is undefined and has no properties.
at SlideShows_fla::MainTimeline/SlideShows_fla::frame1()
Well yeah, I thought so as well. I mean I know the 'formula' by heart on how to add the link to an image (make it into a button, blah blah blah)
But for some reason when I do that, it doesn't work.
I want to add 5 links (lets say google.com) to the 5 images that are in a slider.
For some reason it gives me like... oh man.. so many errors
Here is the link, its about 500kbs, the link is located at the BOTTOM, RIGHT, CORNER: [URL]
I need some help with the actionscript 2, needed to link my xml loaded image to url. This is what I have in my xml file, for the image I need to link to a url:
<image imageUrl="_sustainable_small_1.jpg" />
I am not sure how to add the link tag, in the xml, correctly. Also, I do not know the AS needed, for the .fla file.
I downloaded a flash template which uses XML and CDATA to get its content. It has "Main" pages and from those you can click a read more link and go to "Read More" pages. I would like to be able to add an image to the "Read More" pages.(I'm annoyed the author didn't include a sample image in these "Read More" sections so I could just replace the image file instead of trying to figure out the right code to add! But I'm sure there's a way.)In my .fla file, the "Main" pages are frames 2-7 and the "Read More" page is frame 8 within the movie clip "pages2_1". The Actionscript for images on the "Main" pages looks like this:[code]
View 9 Repliesi want a link at the big img follow the example . it's a beautifull gallery.
stop();
klik.visible = false;
var A:Array = new Array
var B:Array = new Array
var C:Array = new Array[code]...
I am trying to get buttons with ID's to use the URL that is located in the XML file. The button is associated to the ID in the XML, so they need to use that ones URL. They are all displayed on the page at the same time. So they will be essentially e.g. Hotspots on a map, that link to a specific HTML page. I have attached an example file of what I am trying to achieve.
View 6 RepliesAny easy way to load an image with xml and also have give that image a link?
View 2 Repliesim wondering if flash can load an image link and use flash as the container. Like uhmm, ill provide a dynamic or input text, then the user will provide the link to the dynamic/input text then after they click the "upload image" button, the image will be loaded to the movie clip container.
View 9 Replieshow i can use an image as a link and also a button to link to a specific web page. Also i am using keyframe animation if that helps atall
the button is called alaskanMist_btn and the move clip is called alaskanMist
I am trying to link them to [URL]
I've got a xml gallery. Now I want to add a link to a image but I don't know how to do this.This is my code:
portfolioInfo = new XML();
portfolioInfo.ignoreWhite = true;
timeline = this;
[code].....
I have a simple Flowplayer playlist. First one plays a short clip, which then cuts off, and an image is displayed. Is there a way to make the image clickable? [code]...
View 1 RepliesI've got a xml gallery. Now I want to add a link to a image but I don't know how to do this. This is my code:
portfolioInfo = new XML();
portfolioInfo.ignoreWhite = true;
timeline = this;
[Code]...