i wrote an as3 and a simple php page.
whenever i use : URLLoaderDataFormat.TEXT i get all the content of the php file.
when i use the VARIABLES , i get this:
[Code]...
I have an instance of a movie clip called dirt I assigned a variable to dirt called dirt.val I also added an event listener to dirt that calls a function In the function I want to access the dirt.val property, but evt.target.val doesn't work.
View 3 RepliesI want Montana data to appear when I click the state of Montana (and so on throughout the 50 states). Montana is the instance name of my simple button on the state of Montana.
Something's not quite right about this line of code:
if (pEvent.target == myXML.statename ) { ...then do something ...}
The code works fine if I say if (pEvent.target == Montana)
Do I have to convert the myXML node value to text orsomething?
k, so i have a function that checks to see if a user name and email that's being registered already exists in my DB. if the user name previously exists, a 1 is returned. 2 for email and 3 in neither previously exist. if i hard code my user name an existing user name, "joe", who already exists, into my php file and run it in my browser, i get an echoed answer of "1" as i should- nothing less, nothing more. if i don't hard code it and run "joe" over from flash and trace(event.target.data);, i get 1 with a bunch of carriage returns after it in my output window.
[Code]..
I'm looking for an alternative to using:
stage.addEventListener(KeyboardEvent.KEY_DOWN, keyFunction);
The problem I am encountering is that eventListener above works fine on its own(stand-alone swf), but when loading an .swf externally into another .swf, the listener fails with the following error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
How can you target the event listener when loading as an external .swf differently?
how can i access event.target outside event listener method.say for example
my_mc.addEventListener(MouseEvent.CLICK, onC);
function onC(e:MouseEvent):void
{
var m:MovieClip = e.target as MovieClip;
}
trace(m.totalframes);/// not working
now what if i want to get totalframe property of m instance, in short for every movieClip clicked.
I have these buttons in a movie clip and I would like to have only one event listener for the parent, using event.target to point to the children. I have also tried event.currentTarget, and it didn't work.here is the code that works:
test01.abtn.addEventListener(MouseEvent.ROLL_OVER, mouseHandler);
test01.bbtn.addEventListener(MouseEvent.ROLL_OVER, mouseHandler);
test01.cbtn.addEventListener(MouseEvent.ROLL_OVER, mouseHandler);[code]....
It is only targeting the movie clip, not the buttons inside the movie clip.
i'm new to AS3. Couldn't understand what some of the explanations out there are getting at, so i decided to post it here. In the code example below, what does event.target & event.currentTarget point to?
[Code]...
I have a Flex 4 List component which I have tied a click event to. In my event, my assignment of the source file paths works just fine --> my larger image displays just fine when a thumbnail click happens. My problem comes when trying to attach elements of the dataProvider to text inputs on another panel. Actionscript is throwing an error. Can someone point me in the right direction??
[Code]...
i have these 2 functions and both are the same:
as you can see disabledAction receives e.target as a paremeter from another function (click function actually).
is there a way to somehow call disabledAction from rollOverHandler ? (so that the code doesnt repeat)
Code:
function disabledAction(target:MovieClip):void {
var txt:TextField = Finder.findTextfield( target as MovieClip ) as TextField;
if (txt) {
[Code].....
Its easier explained if I just write down the code:
function loadMc(frame:Number){
aNum = "array"+frame;
array1 = ["mcname", "identifier", "200"];
[code].....
I am building a gallery that creates movieclips dynamically within another dynamically created movieclip. I tried to target those movieclips using variables the following way:
_root.mc_holder[parent_mc][child_mc].onRelease=function(){
//whatever
}
but it won't work. I have trace(_root.mc[variable1][variable2]) and it returns the right path, so why is the onRelease not working?
I'm writing code that takes data from mysql that's processed by a PHP script. It's actually a bit bizarre, at least to me. Anyway, here's some basic AS3 code that's moving toward what I want to do:
var loader:URLLoader = new URLLoader();
var urlRequest:URLRequest=new URLRequest("receive.php");
urlRequest.method=URLRequestMethod.GET;[code]....
For some reason, the statement "trace(evt.target.data);" produces a whole pile of garbled text before the actual stuff that it's supposed to show Because of problem #1, I've had to include a throwaway variable at the beginning, otherwise the first variable I try to pass into AS3 comes back as undefined. This causes errors when I run my flash movie in the IDE, but when I run it from the browser it doesn't seem to have any effect.But this is the strangest thing of all whenever I make any changes to the database (and subsequently try to load data from different variables), the new variables come back as undefined. For example, let's say that I add another entry to the database, and decide to load students 2, 3, and 4 instead of 1, 2, and 3. When I do that, any new data I've added comes back as undefined, even though when I view the PHP output in my browser, it looks just fine.
And now for the REALLY bizarre part: I'll copy that output, paste it into my PHP script as an echo statement, comment everything else out, and my flash movie runs fine. Even though the output from the PHP script is exactly the same, it gives me errors.
Here's my code:
Code:
// Set the position and nodecount variable here
var position = 50;
[code]....
I'm implementing a text display area inside an app that displays selected text when the user mouses over one of four elements. Rather than creating a handler function for each element, I would like to get the name of the instance that is calling the handler in order to implement a switch statement. I've tried two ways, but both aren't working:
//install event handlers
initialText.addEventListener(MouseEvent.MOUSE_OVER, mouseOverHandler);
timeText.addEventListener(MouseEvent.MOUSE_OVER, mouseOverHandler);
withdrawalText.addEventListener(MouseEvent.MOUSE_OVER, mouseOverHandler);
[Code]....
Both of those return undefined for the variable name. However, in the debugger, I can trace the event values through currentTarget.name, and that shows the instance firing the handler function, whether it be withdrawalText, initialText or timeText. So how can I apply the name value to a variable in order to determine which text block to display?
I have a URLLoader and a Loader triggering the same function. If event.target is traced by this function it outputs [object URLLoader] or [object LoaderInfo].However, the if statements don't seem to know what the event is and won't output anything even though it traces fine in the first trace statment. What is going on here?
ActionScript Code:
xmlLoader.addEventListener(ProgressEvent.PROGRESS, preLoader);
photoLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, preLoader);[code]............
Now, when I click on the button in the area where the movieclip is it will register this movieclip as event.target. I would like to make the button the event.target regardless where I click and prevent flash from registering the movieclip inside the button as the target.
View 3 RepliesI searched the forum first to find similarities but I couldn't find one. Sorry if this is a double however. If you try to compare a widget's instance through "event.target" after it has raised a "focusOut" event, then you won't get the actual instance.
[Code]....
My parent class adds bonus_mc It then adds an event listener to bonus_mc to listen for a custom event When the custom event is dispatched I want the parent_mc to remove event.target. But it wont, it's says 1118: Implicit coercion of a value with static type Object to a possibly unrelated type flash.display: DisplayObject.
View 3 RepliesThe logic of the code is as follows (pseudo):
function X {
switch
1) tween1 -> on tween finish launch onTweenFinish();
2) tween2 -> on tween finish launch onTweenFinish();
[Code]....
results in: ReferenceError: Error #1069: Property name not found on fl.transitions.Tween and there is no default value.
What I want is to process all three tweens in a single function, but I need to know which tween it was. It is of course possible to make three separate functions, one for each tween, but that is just not proper.
I have a movieclip named button1 that contains a dynamic text named txt in it.My problem is that if i try
if(event.target==button1)
{
}
[code]....
Is it possible to simulate the event TARGET ?
dispatchEvent(new Event("doSomething"));
I want to simulate a click on a specific item of my menu.
i add eventlistener(MouseEvent.MOUSE_OVER) to some movieclip. but when i write: addChild(event.target) it doesnt work.
More info: i have several rectangles on the stage. when movie starts, they all get alpha 0.3, when you mouse over any of them they get alpha 1 with tween. But i made it so that, rectangles are located over the each other. and i want to make it so, that when you mouse over any rectangle it comes to front, but it doesnt work with addChild(event.target).To try it at your own, just create 3 different sized boxes and give then instance names: square_mc, square2_mc, square3_mc and copy+paste this code.
[Code]...
I am searching for a way to use one eventlistener with multiple buttons that bassically behave the same way.It works with event.target.(any movieclip property here, e.g. alpha).
[Code]...
var urlString1:String="TestDrive/z05483205.xml";
var url1:URLRequest=new URLRequest(urlString1);
loader1=new URLLoader(url1);
loader1.addEventListener(Event.COMPLETE, test);
[Code]....
I expect to see this z05483205.xml
Can I change an event target's name? or it's an only-read property? I've been googling it but to no avail... For example, say this is my button code:
[Code]...
if trace the event target's name, you get buttonOne. But what I need to do is have the event's target's name to become buttonOne1. because I already have a button with the instance name. That's my setup, not the way I would do it OF COURSE, but this is the way the unique file is setup for my aunt, to have two set of buttons that calls the same image...(not the thumbnail issue I had before)... so the Question: is there a way to add a letter or remove a letter from the event target's name? You know how you can add a letter to the beginning of an array like buttonsArray.unshift(newButton)....can you do the same thing with an event.target.name?
I made this file, test1.fla where a movieclip named mc1 contains two other mcs. Then I wrote some simple code to make the target of the event (in this case a mouse event) shrink a little.
Here's the code I've used:
Code:
mc1.addEventListener(MouseEvent.MOUSE_OVER, onDown);
mc1.addEventListener(MouseEvent.MOUSE_OUT, onUp);
function onDown(evt:MouseEvent):void {
[Code]....
When I test this movie, only the selected mc that I hover is the one that shrinks, the other does not shrink (I am talking about those guys inside mc1). However I have done a similar file called test2.fla in which I replaced the nested mc's with shapes, the code is exactly the same, but in this case it's mc1 that shrinks, I mean no matter what shape I hover with mouse, both shrink.
I know (think so) that this is because of event propagation, but why do these two files react in a different manner? Is it becase the mc's inside mc1 can also be a display object container, but shapes cannot?
i am a little new to this ActionScript thing, and I find problem trying to understand this one thing:When I call an event listener function, then sometimes we use
View 1 RepliesI have a Image XML menu that works well, but with a litle problem with target in TweenMax. I will post only the code that is relevant to resolve the problem, I hope .
I have a MC in library, and inside I have 3 movie clips, img_mc, bg_mc (this is a background for text) and title_mc (inside this mc I have a textfield named title-txt).
I create a for loop for the MC, and I use e.currentTarget in my tween animations.
When I hovered the title_mc is suposed to scale the background, but because bg_mc are in back of the text, the hover don't works. I do not know how to target the title_mc for on MOUSE:OVER scale the bg_mc.
Important Pieces of Code:
[Code]....
This Last piece of code don't works because title_mc is over bg_mc.
If I put in event MC.container_mc.title_mc.addEventListener(MouseEvent.MOUSE_OUT, out_bg); the Text will scale too, and I don't want this...
how to manage the target of a mouse event. As everyone knows, if I use localX/Y property on a mouse event, I'll get the x/y coordinate of the curson referred to the target Sprite. But if I need these coordinate referred to another Sprite, layed in the bottom of the stage (therefore unreachable for the event), how can I do for these?
View 1 Replies