Professional :: Gradually Fade In A Movie Clip Using Alpha Values?
Mar 22, 2011I'd like to know how to gradually fade in a movie clip using alpha values? I'd like it to go from 0 to 1 in about 2 secondsish
View 5 Replies
Similar Posts:
ActionScript 2.0 :: Modify Fade In - Movie Image To Fade Back In From Alpha0 To Alpha 100 Before It Re-starts
Feb 4, 2010I have a tweened movie which plays on a loop. A click on the image area stops the movie and the image fades nicely from alpha 100 to alpha 0. A second click brings the image back immediately to alpha 100 and the clip continues. I would like the movie image to fade back in from alpha0 to alpha 100 before it re-starts; (the reverse of the fade out). At the moment the re-appearence of the image is a crude jump. So far my ill informed tinkering has not worked.
[Code]...
ActionScript 2.0 :: Rotating A Movie Clip Gradually?
Aug 23, 2009I'm trying to create a puzzle/platform game where the environment flips (180 degrees) rotates (90 degrees) by increments when the player touches a power-up so to speak. The code I have for the power-up is:
onClipEvent (enterFrame) {
if (_root.powerup, hitTest(_root.player)) {
gotoAndStop(2);
[code]....
ActionScript 3.0 :: Alpha Keeps Gradually Increasing
Apr 1, 2009I have a MovieClip, "my_mc", that is hidden and shown when you MouseOver a grey block that is on the stage, similar to a tool tip. Inside of this MovieClip is a TextField, "my_textbox", and another MovieClip, "my_box". "my_box" is underneath the textbox and will hold the graphics for the tooltip.
What I am trying to do is add a Sprite to "my_box" and set it's alpha to 50%, or 0.5 AS3. Well, I accomplished doing this, however, when you Mouse Out then Mouse Over again, the alpha increases by 50%, to what seems 75% alpha now, instead of staying at 50%. Do it again and it goes up another 50%, so on and so forth.
I have tried setting the "my_box" alpha, as well as the alpha of the Sprite that is drawn inside, and it still does it. Also another piece of info, when I trace the alpha, I get 0.5, even though it appears to be solid red on screen, after a few MouseOver/MouseOuts. The source files are attached, but for those who don't want to download, here is the AS3 code:
[ode].....
CS3 :: Pages - Make Each Page Movie Clip Have A Fade Start And Fade End
Apr 12, 2010flash version: CS3 AS2 Im having trouble making the pages for a website im working on. I have a row of buttons, and I want each one to open its corrisponding page ie. contact_us_button to open contact_us movie clip. the thing is I want each page to transition in and out. so when I click contact us, the contact us movie clip fades in and stops. When I click about us, the contact us movie clip fades out and about us fades in.
Is the way to do this to make each page movie clip have a fade start and fade end, and have it stop before the fade end, and on another page click continue playing the current clip to get the fade out and then open the new page movie clip?
IDE :: Gradient Masks - Edges Gradually Transition 0 Alpha
Mar 31, 2011Is it possible to get a 'feathered' mask in Flash CS4 where the edges of the mask gradually transition to 0 alpha? I tried to set this up by creating drawing a shape with the pen tool, turning into a movieclip, then filling the original outline with a white (or lime green) center to black on outside, with the outside fading to an alpha value of zero. When I apply this as a mask, however, the borders are completely sharp rather than the layer below being 'partially' masked.
View 2 RepliesActionScript 3.0 :: Loading Records Into DataGrid Gradually - Fade Out / In
Apr 7, 2009I've been searching all over for an answer to this, but have not had much luck. I have an .xml file that loads its data into a DataGrid. However, I don't want all the data to load up at once. I would like it to load the first five records, and after x amount of seconds fade out and fade in with the next five records.
View 2 RepliesActionScript 3.0 :: MCs Classes - Can't Send An Event From The Eagle Movie Clip Or The T2D Movie Clip To Tell The Other To Fade Out
Nov 5, 2010There is a bad gap in my knowledge with Event Dispatch and Event architecture, and this problem proves it. I've been getting nowhere on this problem for two days, I've posted everything to my Flash site. Go here, please: [URL] Click on "Flash Banners" The two thumbnails represent two different classes. Each class is identical. Both are "extends Movie Clip" classes. Tweeners of various types control the hover and click methods. URL Loaders load the thumnails which I then wrap in MC's and make them buttonMode = true, etc. Hover and click to load the Banners on the thumbnails.
I can't send an event from the Eagle movie clip or the T2D movie clip to tell the other to fade out. Both Banner classes are instantiated through a separate Base class. I'm sure this has to be an Event Dispatch from one MC to another and that it can't be done by the Base class. how I can send an Event or Event Dispatch and what the code structure is so one movie clip can in one class can tell the other movie clip in the other class to disappear while it's neighbour is playing. I'm happy to post code or explain / clarify anything that's not clear.
Professional :: Alpha Fade On A Type Symbol Won't Publish?
Jun 14, 2010First project in CS5 upgrading from CS3. I've got a very simple movieclip. A couple of layers of jpgs that pop in, scale up and run to the end of the clip. Two layers of type I have set in Flash and converted to symbols on separate layers. I did an old school tween and set the first frame symbol to an alpha of 0, and the last frame of the tween to 100%. I scrub the playhead and it works fine. I've done this thousands of times in Flash back through Flash 4.
I add the movie clip to the main timeline, give it a little alpha fade in to the main sequences and when I test or Publish the movie, it doesn't render the alpha fade on the type. It's as though the tween isn't there at all the type pops on screen full strength.Everything else works. All the tweened scaling, a couple of other alpha fades on other art symbols, but the type fade doesn't render.
I even went in and re-did the fades as motion effects. Scrub the playhead - looks good.Test or publish, there's nothing.
Professional :: Flash CS4 To Fade A Photo And Can't Get Alpha To Work?
Oct 31, 2010I installed Flash CS4 and the alpha doesn't seem to work. I follow all the instructions to the letter but get no results. I had no problems working in Flash MX
View 6 RepliesActionScript 2.0 :: Alpha Fade Out - Making 'client Quotes Movie?
Aug 12, 2002i need some tweaking help for making 'client quotes movie'.here is the condition. i already make movie to show client quotes. now i need to make transparent when user click the navigation button. to see my website,u can enter at [URL]...
View 2 RepliesProfessional :: Gradual Image Fading Via Changing Alpha Values?
Dec 18, 2010I'm doing this via the motion editor. But, is it possible to fade an image gradully from left to right instead of the whole image at once?
View 8 RepliesActionScript 2.0 :: Alpha Tween - Movieclip Containing The FLV Component To Load The Right File - Fade In And When The Video Ends - Fade Out
Oct 13, 2008I simply have one FLVPlayback component in the background and a movieclip on the layer above with an FLVPlayback component inside it. The first FLV component is constantly looping a five-second video. So all I need is for the movieclip containing the second FLV component to load the right file, fade in, and when the video ends, fade out. Absolutely all of that works... apart from the fading in. What I noticed was that my movieclip was fading in correctly, but the FLVPlayback component was empty and transparent until the fade had finished - then it played the clip. Here's my code, which gets called at random intervals:
[Code]...
ActionScript 3.0 :: Make A Slider Bar Reveal Movie Clips On Stage As Drag It Along And Alpha Values
Feb 25, 2010I'm looking to make a slider bar reveal movie clips on my stage as you drag it along. I've written some sloppy code that works, but isn't smooth by any means. I basically put MCs on different frames on the timeline, and I want those MCs to fade in or out relative to where the pointer is on the bar. This was a workaround, what I think I need is a boolean solution, but I'm not familiar enough with AS to write one from scratch. Here is the code I have so far. Does anyone have any ideas?
[Code]....
Actionscript 2 :: IDE - Reduce The Alpha Of A Movie Clip When Mouse Is RollOver The Movie
Apr 19, 2010I want to reduce the alpha of a movie clip when mouse is rollOver the movie , the alpha will be continuously reducing over frames, i dont want to use tween.
[Code]...
i this code when i rollOver the mouse on a movie clip, it shows the alpha reducing over time , and at roll out alpha increases over time. but if i rollOver and rollOut in fractions of seconds , it flickers (like 60-100 instead of from the current alpha lvl), So i am looking for some code that can help me in fixing this problem.
Fade In / Fade Out Alpha Tweens Not Working?
Jul 10, 2009I've got a function 'onIntroFinished' which starts two tweens (musicPlayerIntro and fullResetBtnIntro). After each tween, an eventlistener is added to that particular tween to see when it's ended, so it can call on another function to start a new tween. The first tweens complete within the 'onIntroFinished' function....however, they don't go on to start the second tween in the 'musicPlayerIntro2' and 'fullResetBtnIntro2' functions? The trace statements are getting called for the second tween functions, so they're getting through to that point, but why aren't the tweens starting? Ocassionally when I test it, the second tweens half work, fading out to 50% alpha, but then stop and stay visible, rather than fully fading out. Is this necessarilly the best way to do a fade In/fade out alpha tween?
[Code]......
ActionScript 2.0 :: Fade In White Movie Clip Over Main Movie When A Button Is Pressed?
Aug 30, 2006I am looking for a way to fade in a white movie clip over my main movie when a button is pressed.
(i.e. When you press a button, a white rectangle will fade in over all other layers and then fade out after a couple of seconds. This is to make it look like the different pages are fading in and out without having to build the transition over and over again.)
ActionScript 2.0 :: Changing Alpha From A Different Movie Clip?
Apr 6, 2010The thing should work like this: theres a movie clip in frame 10 of the timeline with two buttons inside, by clicking one of them the movie should jump to frame 15 and take the alpha of two Mc there (they are inside a different movie clip) to 0. This is what ie been trying (code on the button, btw):
on (release) {
McScene2.lettuce._alpha = 0;
McScene2.pumpkin._alpha = 0;
[code].....
ActionScript 2.0 :: Movie Clip Alpha Trail
Apr 6, 2004I'm having trouble getting my movieclips to have trails that fade behind it. I'm having the dupilcate movieclips delete themselves once their alpha reaches a certain point. what's wrong with my code? I'm pretty sure it has something to do with the counters. You can view my fla here: [URL]
View 5 RepliesActionScript 2.0 :: Movie Clip Alpha Trail?
Apr 6, 2004I'm having trouble getting my movieclips to have trails that fade behind it. I'm having the dupilcate movieclips delete themselves once their alpha reaches a certain point.
View 5 RepliesActionScript 2.0 :: Can't Seem To Fade Out Movie Clip?
Jul 7, 2010Have been fiddling around for some time now and just can't seem to fade out my movie clip, the same way that I have faded it in. I have this AS already on it, am not sure if I should set the alpha or if I need to do something more complicated.
[Code]...
ActionScript 2.0 :: Movie Clip To Fade In On Top Of Everything?
Mar 3, 2008I will be loading a movie clip, into a container just to the left of the portfolio elements.What I want to happen is, in my Loaded MC I want to be able to click on the thumbnail, and in the parent movie clip ( the one you select the portfolio elements from).I want a Movie clip to fade in on top of everything. but Im having a few errors.IN my parent file Ive created and named a blank movie clip .the script inside of the satellite MC is :
on(press){
_parent.loadMovie("enlarged.swf","targetmc");
}
but it unloads the satellite MC and replaces it with the swf, rather than inserting it in my target movie clip in the parent page.I cannot use _root in this instance, and Ive tried adding "_parent._parent".. im at a loss here.....
ActionScript 3.0 :: Movie Clip To Fade Out And In
Mar 25, 2010How do you make a movie clip fade out when the cursor enters the stage, but then fades back in once the cursor has left the stage? Is the same method then used with buttons?
View 1 RepliesActionScript 3.0 :: Change Alpha Of Movie Clip OnMouseMove?
Apr 6, 2010I'm new to action script and was wondering how to change the alpha of a movieclip from 0 to 100% gradually or instantly when the mouse is moved ( like the navigation bar on a media player) when the mouse is still i want the alpha to be at 0, i am totally new to actionscript but am familiar with code syntax.
View 2 RepliesActionscript 2.0 :: Make A Box Which Is A Movie Clip To Ease Alpha Out
Feb 17, 2009I have a button and when this button is clicked, I want it to make a box which is a movie clip to ease alpha out.
newsButton.onRelease = function() {
gotoAndPlay("News");
};
Changing Alpha Of Movie Clip On Button Rollover
May 15, 2009how to increase the alpha of a movie clip when you rollover a button.
View 1 RepliesActionScript 2.0 :: On Click Move And Alpha A Movie Clip?
Feb 28, 2007would like to know the AS code for getting a movieclip object to move to a specific x,y position on stage and change its alpha at the same time... would be nice if the movement was done with a nice tweening also.
View 3 RepliesActionScript 2.0 :: Control The Alpha Speed Of A Movie Clip?
Mar 1, 2008When a movie clip is clicked on, another movie clip will fade out.The problem is that the clip that needs to fade out just disapears in a second, is there a way to controll the speed.I read a lot of info about this for complicated setups, is there a simple fix for this.I was hoping I could just do this designR_mc._alpha = 0/4;But that does not work.HERE IS THE CODE
design_mc.onRelease = function()
{ designR_mc._alpha =0;
}
[code].....
ActionScript 3.0 :: Working With Movie Clip Alpha In For Each Loop?
Mar 20, 2010How can i change movie clips apha property slowly one by one in for each loop? I can't undestand what's wrong((( From XML data i create for each loop, where my MC creates. But i can't chang their alpha property slowly. When i'm trying
Code:
mc.addEventListener(Event.ENTER_FRAME, alphaShow)
function alphaShow(e:Event):void{
e.target.alpha += mcAlphaPlus;
[code]....
ActionScript 2.0 :: Can't Access Alpha Property Of A Movie Clip
Mar 1, 2005I can't seem to access the alpha property of a movie clip. I can change it's y x position but not the alpha....
This works great: loader2.lettercontainer.letter_mc1._y=50;
But this doesn't do anything: loader2.lettercontainer.letter_mc1._alpha=50;
The movieclip "letter_mc1" contains a createTextField with one letter in it. I'm completely lost why this isn't working....