Where I could get the code, to pause the timeline and a a text effect, ex: like adding a persons name beside them, on a rollover event, in AS2. Here is a ex: check out this header [URL].
View 1 RepliesThe script for my timer worked for one button but as soon as I set up the other 2 buttons to do the same, I started having a problem where the rollover action would go after the set amount of time was up but then would repeat itself once after the set amount of time was up again. just to clarify, if it needs it, the reason I don't have a rollout attached to these buttons is because I want the menu to stay out until you leave the menu area
so I have an invisible button called menuin_btn which sits to the right of the menu and covers the rest of the stage where the content will be, so you have to rollover that area for the menu to roll back in. The "rollin" in my code brings the movie clip to frame 16 (the end) where I have a gotoAndStop(1); command to get it back to frame 1 so the rollover can be used again. I've attached a zip with my current flash file and swf and here is what my current script looks like on the main scene:
[Code]...
how to pause a movieclip on rollover and start again on rollout?I need it so when it returns to playing on rollout it continues from where it paused.I would guess it's pretty straightforward but my as3 knowledge is v low...
View 2 RepliesI have a sequence of images that make up an animation.[code]...
View 13 RepliesI'd like to pause an animation loop when I rollover a button(the button is part of the area that is being animated and I want all the other buttons to stop animating except for the one I rollover) and then start the animation back up again when I rollout.
View 2 RepliesI've just started get the hang of Flash, but am not too skilled with AS2 yet apparently. I was wondering how I would go about if I want the scene to pause when I roll the mouse over it, and then continue playing when I roll out.
I figured it would be something like this:
on(rollOver){
stop();
} on(rollOut) {
???
}
how I could go about pausing this timer on rollover of an object, stage... anything? I am just cycling images on the main timeline via this timer but would like the timer to pause if a user has mouse over one of the images.
[Code]....
How to get a video to play upon rollover and pause upon rolling out? Here's an example: [URL]. Roll over the dark gray stripe and click on Contact. Roll over the videos to start them. I have not been able to find any info out there on how this is done.
View 4 RepliesI created a simple flash movie for a client that loops 3 times. At the end of each revolution i want to add a button that will pause the main movie action and reveal a small pop-up for legal copy when the user rolls over it, then re-start the movie again once they roll off it - however, it will only do this when the user interacts with the button, if they don't touch it, the movie will continue through the 3 loops unimpeded. Side note: I cannot use pause and play buttons, it needs to be a simple rollover/rollout function.
View 2 RepliesI am trying to achieve a rollover effect like this menu.
[URL]
The menu is working and sliding perfectly, however it's still a little squirmish, and if I can't figure this out I'll deal with it and let it slide. However it's bugging me and want to correct the "sluggishness" of this issue. I want the menu to pause, or rest when you open it, so that there isn't a chance the it can slide off of the users mouse pointer.
Here is the code
Code:
onClipEvent (load) {
_y = 0;
speed = 5;
[Code]....
I thought a simple on (rollOver) speed = 0 would do the trick, however it just sends the menu in a frenzy.
layer 1 --> an embeded video
layer 2 --> an invisible button
**Here is my code in layer 3**
stop();
var vid:Boolean = true;
function vid_event(event:MouseEvent) {
[code]....
I already get the play and pause fuction (that's all i need). I just want to add an image to show when the video still not playing in and pause. If the video played the image will disappear and if pause the image will appear.
I have a movieclip. And I try pause n play together with sound. But I can't do it. This my code in one frame just play pause movie clip without sound..
MC_play.onRelease = function(){
hal_satu.play();
sound1.play(sound1.position);
} MC_stop.onRelease = function(){
hal_satu.stop();
sound1.stop();
}
1. And must fill the sound in movie clip or in frame?
2. How I can play n pause the sound with code?
Can some one show me how to repeat a on rollover effect.currently i am creating tweened scroller i can get the advance button to play. but the back button only goes one pixel at a time.the advance button is scripted liek this
on (rolloer){
this.bar.play();
}
the previous button is like this need this part to loop until the end of the tween
on (rollover)
this.bar.PrevFrame();
}
I am just learning Flash and ActionScript and I am having a tough time with AS syntax. I am trying to create a rollover navigation effect similar to that of Gnomon School.
View 1 RepliesI am having trouble with a piece of code that I used to implement for all of my buttons in Actionscript 2.0. What I need help with is creating a similar effect in AS 3 (see code at bottom of post).
I prefer this code because when a visitor rolls off of the button before it is finished with the rollover animation, it will rewind the animation and give it a smooth rollout effect (instead of an abrupt stop to the rollover effect to play the roll out effect).
[Code]...
My timeline would be setup like this: I set up the rollover effect only, putting stop(); code in the keyframe at the beginning and end of animation. Because of the rewind (prevFrame()) effect it would use the same animation to rewind for the rollout effect.
How can i pause my timeline for a few seconds.
Any easy way to doing this. Any ready to use script?
I have a SWF in a timeline that i want to pause for an amount of time.I can pause the timeline, but the SWF starts on loading.this is what i want
1. Timeline and SWF pause (ie 2 sec delay)
2. Timeline plays out, (SWF loops within timeline)
3. Timeline loops to start again with pause and SWF pause.( ie step 1)
I would like to do something like the menu on the left hand side of this page: [URL] I am after the effect where the color fades in when rolled over and fades out when the mouse leaves the area.
View 2 RepliesI am creating some buttons for a menu, and am using movie clips so that I can have a multi-frame effect on them when you roll over them. The buttons are flowers that bloom on rollover, and I only want them to play once- so the first time you roll over them they bloom, and then they stay in that state as long as you're on the page.
So far I haven't been able to figure out how to do this. I can create the animated rollover effect, but the next time I rollover them, it plays again from frame 1. I've tried using a variable that increases by one every time you roll over it, and then if it's greater than 0 it doesn't play, but I don't know how to set it to 0 at the beginning without it setting to 0 every time you roll over it.
Currently I have retangular jpegs that are converted to linked buttons. The reason I made these buttons as jpegs is b/c I wanted to use this really cool font that most computers wouldn't readily have. Its working just fine but I wish to have a underline effect when the mouse is rolled over. I looked under the properties of the button but it does not have that option...is it possible to do that in the timeline?
Should I replace that non-underlined button with a jpeg that's been underlined when the keyframe is in the over position? I am using both dreamweaver and flash for the first time; all my content is a single flash swf file inside a box that is centered in the page in dreamweaver.
I find the layout arrangement in Dw difficult somehow and Fl much easier to work with. This is the page I'm working on [URL].
I need to know if it's possible to have an HTML rollOver state effect Flash. I want the user to rollOver an HTML button and when they do, the Flash movie below it plays.
View 3 RepliesI'm pretty new to Flash, and I want to create a button like these.I understand how to make a basic rollover button, but I haven't got a clue how to do animation like that.URL...
View 1 RepliesI'm tring to create a roll over effect. I have 4 Pictures: Let's Say A B C D. If I roll over A I want the other picture to have a transparent light box on top so it looks like A is the main focus. So if you roll over A the other pictures will turn dark and A will keep its color. I can do this by making A a symbol and then putting a transparent png dark box on top of B C D. That works. What doesn't work is when I go back to the original time frame and make B a button also. When I add the roll over effect, it only does it for that. Let me show you in pictures.
<---- that is the original
<---- When I roll over A
<---- When I roll over B
The last two are made using two different flash files. I can't put them together in one. If I put them together and roll over on A, It comes out like this.
I am making a Flash ad for my company. I am a beginner/intermediate Flash user. I need to add a clickTag, which is done. The issue is that I want the button to "shimmer" when it is rolled over. I cannot figure out how to make this work with the clickTag having to be the topmost layer in the file.
This is what I have so far:
shinyButton.onRollOver = function() { this.glitter.play();};clicktag_but.onPress = function(){ getURL(_root.clickTAG, "_blank");};
[code].....
I have the following rollover, release outside effect that I want to be able to link to a web page but no matter what I try I can't seem to get it to work: -
on (rollOver) {
gotoAndPlay("s1");
}
[code].....
how I can replace one movie clip with another when I click on the first one. Below is my code that shows me loading the first movieClip and adding it to the stage and assigning a OnClick listener.
thumbs_button.addEventListener (MouseEvent.CLICK, playVideoButton);
for (var i:Number = 0; i < my_total; i++) {
var playButton_url = "play_now.png";
[Code].....
www dot arcteryx dot com (sorry unable post the link){once u are on the site goto mens(top left) >> jackets (left menu) >> click on any jacket}i figured out the magnifying part by masking but the issues that i have are :1. Snap the position of magnifying glass part to the position of cursor.2. make the cursor invisible3. start drag on Rollover (i think i got this)4. stop the magnification as the user rolls out out the specific area (the jacket in this case)
View 1 Repliesmake the rollover effect on the buttons located here (under Zones):
[URL]
I did this:
ActionScript Code:
function moveX(mc:MovieClip, newX:Number, easeSpeed:Number) {
//trace("moveX Started");
mc.onRollOver = function(){
[code]....
To make a simple rollover with a click to go to another page, I'm thinking there has to be a easier way sticking to coding still. I don't want to place the code on the button but keep it on the timeline like above.
I've got "thumbnails bar" (created with a mask level) into the bottom of my library and above, my image holder where i can see images in their real size. I want to realize a rollover function on my "thumbnails bar" ,that let me scroll all my thumbnails to the next one (or previous one)depending if I'm on the right (or on the left) of my thumbnails bar.I saw that effect on internet but I can find the right code.
View 2 RepliesI'm trying to set a special roll over effect for a movie clip i created. all i need to do is this: when i roll over, it should play from frame 2 and stop where i told him (at frame 5) when i roll out i want him to play from frame 6 and stop where i told him again. (at frame 10). i already did this with no problem except this: my movie clip has a very complex animation i created with other movie clips who works frame by frame style (actual animation). the problem is this: when i roll out after a short time (about half a second) the flash jumps to the rollout part of the movie clip and shows the rollout animation but doesn't finish the rollover animation, what makes the animation to jump (the animations i use is a bit long).
so i'm trying to see if anybody can explain to me how do i make this jump get out of my flash animation. what i mean is this : if i rollover the mouse and stays on the movie clip, the rollover animation is played and when i rollout out of the movie clip the animation continues as usual (this is something i already accomplished). but i want to make this a bit more complex : when i rollover and than right away roll out of the movie clip i want the flash to play the roll over animation and right after that the rollout animation without stopping .... ' i hope i made myself clear with this problem .... for some of you it may seem easy (using some action script tricks or something) but I'm only a beginner who's trying to figure it out ....