I have a SWF in a timeline that i want to pause for an amount of time.I can pause the timeline, but the SWF starts on loading.this is what i want
1. Timeline and SWF pause (ie 2 sec delay)
2. Timeline plays out, (SWF loops within timeline)
3. Timeline loops to start again with pause and SWF pause.( ie step 1)
How can i pause my timeline for a few seconds.
Any easy way to doing this. Any ready to use script?
The main timeline has a movie that consists of three frames that are supposed to hold while a sound clip plays. I was thinking of having a timer for each of the three frames instead of putting like 600 frames in the movie. I did it this way in those three frames, just changing the timer variables[code]...
View 2 RepliesIs there an easy actionscript that can be added to the main timeline to delay playing and wait at that point in the timeline for a few seconds and then continue to play? Sounds easy but I've yet to see an example of such.
View 4 RepliesI am trying to just have a Pause button appear in frame 620 of my timeline and users can click this to pause the timeline if they want to slow down and read my text. However, with the below code, I get an error message of:
TypeError: Error #1009: Cannot access a property or method of a null object reference. at Untitled_fla::MainTimeline/frame620()
Here is my code on frame 620
//Pause Button code
btnPause.addEventListener(MouseEvent.CLICK, stopLoop);
function stopLoop(evtobj:MouseEvent):void{
stop();
}
The music and sounds continue, but the graphics and text stop progressing.
how to pause the timeline for a few seconds? Instead of me just putting in a load of blank frames.
View 9 RepliesIs there any way to stop the timeline at given frames for varying set times?This is a AS2 one I used in the past (I think I saw it here on this forum)
this.createEmptyMovieClip ("timer",50);
timer.onEnterFrame = function () {
if (this.startTime > 0) {
[code].....
I am not too sure if I can make my problem clear. I wanted to make a simple pause and play button. My main timeline will have a movie (MyMovie) with animations in it, so when I pause, I will need to pause it as well. At first, I did not have any problem, as I could just pause using both using stop() and Mymovie.stop() as well as with play() and MyMovie.play() in the main timeline.
However, after that, I used a timer in some frames in Mymovie. May I know how I can go about it? No matter how I tried, the timer will ask the movie to continue playing even with the pause button pressed once it starts. How can I ask the timer within the movie to stop?
I have a 4 1/2 minute Flash Demo: first minute is Intro Flash animation, next 3 minutes is a progressive video with a FLV playback component, and last 30 seconds is conclusion Flash animation. When I press the pause button on the FLV it pauses the video but the main time line continues to play in the back ground so that the last 30 seconds will play no matter what the stat of the FLV. If the FLV is paused the conclusion will just start to play when it reaches that part of the timeline or worse if you pause the FLV and resume it after say 30 seconds the video and the last scene sound plays at the same time at the end of the video. I have a toggle play/pause button on the intro animation that works fine and the FLV play/pause works but I don't know how to pause the end of the timeline when the FLV is paused.
View 9 RepliesI have a project that has an event sound (a narration) in the timeline.
I need to have buttons that pause and resume this narration, but for some reason I can't seem to find any information on it.
Everything I find online calls an external mp3 and I can't do that because of server restrictions.
I can stop all sounds, but then it doesn't resume from where I left off.
I do also have an AS Linkage name, but I can't seem to get this to pause and resume.
i need the timeline to play but pause for 5sec along the way.my code but wont work..
Code:
// sec = number of seconds
function paused(sec) {
stop(); // action to pause
var i = sec - 1;
[code]....
I'm trying to pause and resume sounds my movie. I came across this helpful write-up for pausing/resuming via Sound objects. My question is whether it is possible to pause/resume sounds associated with keyframes in the timeline. I know I can stop/pause them by creating a Sound object associated with _root, but when I go to resume them, it waits until it hits the next keyframe to play the next sound. Is it possible to resume keyframe-based sounds, or instead of dragging those sounds on the timeline should I assign them to sound objects instead?
View 1 RepliesWhere I could get the code, to pause the timeline and a a text effect, ex: like adding a persons name beside them, on a rollover event, in AS2. Here is a ex: check out this header [URL].
View 1 RepliesI have a swf that has embedded audio on the swf's timeline which is set to Stream. This swf is then loaded into my main flash timeline via the loader class. I have a button coded as a toggle switch that pauses the loaded swf via the stop() and play() command. This works fine. The issue is that when the swf is paused (stop()), the audio is longer heard, but it continues to play. When I press my toggle switch again, the swf begins to play exactly where it was paused and the audio is now heard, but the issue is that the streaming audio is now out of sync since the swf timeline paused, but the audio continued to play. Is it possible to stop or pause the embedded audio on the timeline? I've tried looking at the SoundMixer static class, but this doesn't seem to help. I can use SoundMixer.stopAll(), but there's no way to start the audio again.
View 5 Repliesis there a line of code to pause or stop the timeline for an amount of time?
View 4 RepliesI've got a Flash file with a video symbol on the stage with the instance name 'videoPlayer'. I'm controlling video playback using the following script to play the video, check when it finishes, then resume playing the rest of the timeline:
stop();
var duration:Number = 0;
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
videoPlayer.attachVideo(ns);
[Code]....
I've then also got 2 buttons on the stage for pause and play. The pause button is working fine, with the following script attached to it:
[Code]...
I am using Flash CS3 and ActionScript 2.0. I have a flash timeline that shows 4 tabs and cycles through them. There is also a play/pause button. My issue is that when you click one of the tabs, you start the timeline up again, but the play/pause button doesn't reset. I have the full Flash file, as well, if needed. [URL]
Attachments: TabbedFlash10.swf (52.7 K)
I have a series of movies I'm creating that have streaming audio with animation synced to the audio. I was wondering if there is a component out there, or an FLA, that is a scrubber control bar like the one you see in Articulate Flash presentations, or video.I need it to control the main timeline.I have searched google for a while now and I can't seem to find one.
View 5 RepliesI have been trying to create a play/pause button for the main timeline in my flash movie. Created a movie clip with 1st frame - a pause graphic, then on 2nd frame - play graphic, labelled the frames 'pause' and 'play' consecutively and put a stop action on the first frame of the movieclip. Then put the following code in the actions layer of the main timeline (and gave instance name of 'ppBtn' to the movieclip):
var pp:Boolean = true;
function ppState(event:MouseEvent) {
if(pp) {
stop();
event.target.gotoAndStop('pause');
[Code] ....
It works in stopping and starting the movie but the actual movieclip doesn't toggle between the pause and the play graphics (just stays on the 'pause' state - 1st frame).
I have found a generic recursive loop that stops/pauses all child movieclips. If I change stop to play in the code, it plays all child movieclips simultaneously. I want it to resume only one animation at a time. I want a generic recursive loop that resumes animation from last position (position it was paused) irrespective of whether I have paused on the main timeline animation or animations within child movieclips or animations within grandchild movieclips. (I have animations on main timeline, animations within lastFrame MC of maintimeline, and again within last frame MC of child's timeline).[code]...
View 1 RepliesI am trying to create a pause button that will pause everything on the screen including movieclips/audio. Right now I can't figure out how to pause the movieclips.
View 2 RepliesI have some banners I am doing right now and have a pause timer question. I am fairly green at coding. In my first frame I have this:
[Code]...
I want it to pause each time in the last frame for 8 seconds and loop only 3x. Is there a better way to write this? I know all my code should be in the first frame but I still suck.
I am using Macromedia Flash Pro 8. I have a flash intro that has words (phrases) which slide in. I would like to add a 7 second pause between each phrase to give people time to read them (no buttons). Could someone tell me the script(s) to use with all functions, etc. included - as I am so new to all this. I have been looking for weeks & tried many codes but none seem to work - or I don't know exactly where to place them - or both
View 3 RepliesI have a timeline of 30 frames, each it's own mc (page01_mc, etc.). In each mc I show a picture or two and hear narration.I have a first, prev and next nav on the main timeline. I need to add a play/pause btn that will pause both pictures and sound. I assume I do that in each mc, but do not know where to find the code.Here is what is in each mc now:
var mySound:Sound = new Sound();
mySound.load(new URLRequest("english/Intro01.mp3"));
mySound.play()
why the timeline inside these movie clips and the timeline on the main scene have to correspond to work. [URL]
View 1 RepliesI've been looking for a tutorial to create a timeline scrubber (not animating specific movie clips, but actually a scrubber that can move along different keyframes of a timeline that has a series of images on it).I found a bunch of these (scrubber controlling specific movie clips): http:[url]....but nothing that allows you to just scrub back and forth on the whole timeline in the exported swf.
View 3 RepliesI cannot seem to find anything of what I need from google.(Well, I can find the reverse method to what i need ) Basically I wish to access a variable declared in the Root Timeline from my Movie clips timeline.
[Code]...
I simply want to assign a variable to the current frame of the main timeline (not movieclip timeline) I already know about _currentframe and it doesn't help in this case.
View 4 RepliesI am just trying to use actionscript 3.0 (Flash CS4) to change the 'Parent' timeline from a button in the 'Child' timeline
[Code]...
I am in the learning process. Working with FlashCS5 and AS3. if the issue appears to be too simple for you. Placed a movieclip(mcassessJohn) on the main timeline and moved to the frame labelled "johnFeedback" in the movieclip timeline using the following actionscript code.
[Code]...