I'd like to pause an animation loop when I rollover a button(the button is part of the area that is being animated and I want all the other buttons to stop animating except for the one I rollover) and then start the animation back up again when I rollout.
View 2 RepliesI have a sequence of images that make up an animation.[code]...
View 13 RepliesThe animation/rollover works well but it still abruptly stops when I rollover another button. The link below is an example on what I want to accomplish.
View 1 RepliesOkay, now things are getting a little complicated. I need to build a Flash object that can sit over the corner of an image to serve extra content. It's way beyond my Flash skill level, my work is usually limited to print work in Photoshop and Illustrator so please excuse me if any of the following isn't clear. I am trying to learn though, So this is how it's all supposed to work, along with my issues; When the image & Flash item load a small looping animation will play to draw the eye/show the item as interactive.
When the user rolls over this the corner will peelback. I have a working peelback animation for the rollover, that reacts to mouse over/mouse off, and a looping animation for the initial, but I cannot work out how to make the initial loop until mouseover, then play the peelback when the mouse is over. And go back to the initial animation loop if the user rolls off. (Each of these animations is stored as a movie clip in the Library)
Then it gets more complicated... if the user stays on the corner until it is fully peeled back I need to make a small countdown (sort of a 3, 2, 1 situation) show, before launching a lightbox (would this have to be jQuery, or could it be done in Flash?) in the browser to serve the content.
[Code]...
I am trying to set up a presentation with small clips (pictures that fade in and out) but I need to insert pause so I can provide some explanations to the public. I create a button and inserted an action (stop) on a specific frame, then on click, the timeline move on to the next frame and the animation starts again.This works well. this is the code snippets I used
[Code]...
I'm having difficulty adding a Play/Pause button to an FLA animation that I've created. The animation is a frame-by-frame clip with motion tweens (rather than an FLV file). I'd like the Play/Pause button to toggle between a PLAY state and a PAUSE state depending on whether the animation is already playing or paused. (It will automatically play when the user begins viewing it, so the first button state should be at PAUSE.)
I've sucessfully created the button (actually as a movie clip with the two states). I've also got the button to pause and play the animation--but I'm unable to get the button (movie clip that is) to actually toggle between the two states. Can anyone tell me a good script to use for this type of control?
I started some days ago with Adobe Flash CS4, and I need to create buttons now. The button I want to create this time should be a frame by frame button, so when the user clicks 1 time on the button the animation needs to go 1 frame further and pause there.
This is what I coded so far:
nextframeknop_btn.addEventListener(MouseEvent.CLICK, nextframeClick);
function nextframeClick(event:MouseEvent):void{
play();
stop();
}
And I assume I need to create some kind of time interval of 1 frame between the "play();" and the "stop();".
I was wondering how to create a button that will animate with rollover and rolloff? For example, if I have a box and when you rollover, the box will slide up and a text slides down. and once you roll off, the box will slide back down to its original place and text will slide back up behind the box?
View 8 Repliesrollover play anim issue I am having? this is what I am trying to do:
1. a button that when rolled over animates(working)
2. the button when clicked should play another 'animation' that is placed on the scene(can't get to work)
3.Inside the 'animation' the button plays, there is a 'close' button that should playout the 'anmation' timeline.(not working)not sure what script to attached to the 'close' button .
I am a complete novice in Flash and action scripting, but i'm trying to create a button for a website that simply fades in on roll over and fades out on roll off. I've successfully managed to make the roll over effect work, but i'm struggling to figure out how to reverse the animation on roll off.
View 4 Replieshow to create a play/pause button to control my movie animation?
View 2 RepliesI have multiple movie clip with bg sound.I have used the code AS3 for toggling the animation ( Play & Pause ).Automatically the animation starts and button also togggled on click but couldnt control the animation .I need some solutions like when the intial stage the animation wont start etither the button click to play.After that the flow as it is in action ( ON Click ).
btns.visible = false;
btns.addEventListener(MouseEvent.CLICK,onEl);
dfr.addEventListener(MouseEvent.MOUSE_OVER,onEls);[code].......
I have multiple movie clip with bg sound.I have used the code AS3 for toggling the animation ( Play & Pause )automatically the animation starts and button also toggled on click but couldn't control the animation . I need some solutions like when the initial stage the animation wont start either the button click to play.After that the flow as it is in action ( ON Click ). Kindly anyone guide me to solve it. i'm very new to flash. this is my first project and i have to finish it soon..
[Code]...
So within my Flash document I have a rollover movieclip that contains a UI scrollbar. My question is, can I modify this rollover script to be active until it reachs a certain frame in the animation and then become inactive so that the scrollbar works? Or, is there some script that I can use to make the UI scrollbar active within the rollover clip?
[Code]...
Im trying to write a global fucntion for button rollOver, rollOut animation.
here's what I have as of right now.
On the root timeline::
stop();
function buttonFade(fade) {
if (fade) {
[Code]....
Im still wishy washy on function syntax..
I'm currently working on a flashsite and are trying to figure out rollover menu buttons. The site has 6 menu buttons and are placed next to each other. I want to put a rollover action on the buttons, that when you rollover a button that the whole button image enlarges and moves in front of the other.
View 1 RepliesI am trying to create a pause button that will pause everything on the screen including movieclips/audio. Right now I can't figure out how to pause the movieclips.
View 2 RepliesI want to rollover a button and have it trigger the rollover state of another button. The buttons overlap. The one on top is transparent and smaller than the bottom button. So far I think I have the AS3 to handle the rollover of the top button, but I don't know how to trigger the other button's rollover state.
[Code]....
how to pause a movieclip on rollover and start again on rollout?I need it so when it returns to playing on rollout it continues from where it paused.I would guess it's pretty straightforward but my as3 knowledge is v low...
View 2 RepliesI've just started get the hang of Flash, but am not too skilled with AS2 yet apparently. I was wondering how I would go about if I want the scene to pause when I roll the mouse over it, and then continue playing when I roll out.
I figured it would be something like this:
on(rollOver){
stop();
} on(rollOut) {
???
}
how I could go about pausing this timer on rollover of an object, stage... anything? I am just cycling images on the main timeline via this timer but would like the timer to pause if a user has mouse over one of the images.
[Code]....
How to get a video to play upon rollover and pause upon rolling out? Here's an example: [URL]. Roll over the dark gray stripe and click on Contact. Roll over the videos to start them. I have not been able to find any info out there on how this is done.
View 4 RepliesI created a simple flash movie for a client that loops 3 times. At the end of each revolution i want to add a button that will pause the main movie action and reveal a small pop-up for legal copy when the user rolls over it, then re-start the movie again once they roll off it - however, it will only do this when the user interacts with the button, if they don't touch it, the movie will continue through the 3 loops unimpeded. Side note: I cannot use pause and play buttons, it needs to be a simple rollover/rollout function.
View 2 RepliesWhere I could get the code, to pause the timeline and a a text effect, ex: like adding a persons name beside them, on a rollover event, in AS2. Here is a ex: check out this header [URL].
View 1 RepliesI am trying to achieve a rollover effect like this menu.
[URL]
The menu is working and sliding perfectly, however it's still a little squirmish, and if I can't figure this out I'll deal with it and let it slide. However it's bugging me and want to correct the "sluggishness" of this issue. I want the menu to pause, or rest when you open it, so that there isn't a chance the it can slide off of the users mouse pointer.
Here is the code
Code:
onClipEvent (load) {
_y = 0;
speed = 5;
[Code]....
I thought a simple on (rollOver) speed = 0 would do the trick, however it just sends the menu in a frenzy.
I'm using actionscript 1.0 and 2.0 on flash Pro 8 and keep getting an error when I test the movie. Here is the error:
[Code]...
I've tried to create this rollover navigation...starting over 6 times already. Is there different language / coding for 1.0 and 2.0? I don't understand what I'm doing wrong.
I would like a button on a keyframe mid-animation to stop the timeline if the mouse is over it and when the mouse rolls out of the button it continues to play. Is there a method like this that will work?:
if(MOUSE_OVER.btn_hold){
then stop();
} else if(MOUSE_OUT.btn_hold){
[code]....
Im an Industrial Design student that has never really used any Flash before but need to use it now to mock up an interface design for a product/service I'm developing for my major project.
So far, in ActionScript 2.0, I have a picture of a TV and remote control and intend to design the interface over the top of the television picture and highlight buttons on the remote beside it, that the moderator can click to navigate around it.
To get across the idea that the interface pops up over the existing moving television picture I have imported an FLV of some television ads. My problem is that I want the Flash animation (everything but the FLV if you like) to pause and not loop, and the FLV to continue playing (and looping) in the background, but can't figure out how to do it. Ideally the FLV needs to continue playing, seamlessly behind the interface after the next button is clicked etc.
Wherever I seem to put a stop(); action it'll stop everything, including the FLV, and if I just extend the timeframe to the length of the video, it'll still stop at the end or just loop to the beginning of the entire SWF.
Im trying to pause a loop in my flash animation. I have been trying bunch of codes nothing seems to work.
I have an actions layer.
The animation is 15 seconds. I will extend it to 30 seconds but i want few seconds pause between the 2 loop starts.
I have a very very simple flash animation put together, and I believe I set the document up in actionscript 3.0.
There is 4 layers currently: 1: a background, 2: a border, 3: a transparent png, 4: several images that run through a classic tween to make a scrolling effect.
Besides the tween, there is nothing else running and the tween is just taking some images in a straight line.
Is there an easy way to have it so that when someone puts their mouse over the flash in any location that it pauses on that frame and when they remove their mouse it will continue from that location?