Actionscript 3 :: Flashbuilder "to The Power Of N"?
Nov 3, 2010How can I have the ^-N in the statement below mean "to the power of -N" in Flashbuilder?
var M:Number = 1 - (1 + J)^-N;
Similar Posts:
Flash :: Fastest Way To Get Power By 2
May 24, 2011The question is simple; I need the fastest way to calculate power 2. I need that for this formula which calculates distance between 2 points.var Dist:int = Math.sqrt( (mmx - ox) * (mmx - ox) + (mmy - oy) * (mmy - oy) );
View 2 RepliesActionScript 2.0 :: FMX Power-Up's Not Working?
May 13, 2003why aren't they working? need any more details?
View 3 RepliesActionScript 2.0 :: [FMX] Power-Up's Not Working?
Mar 27, 2009why aren't they working? need any more details?
View 1 RepliesCreating A Game / Adding Power-ups
Sep 6, 2009I've been wanting to learn to work with Flash for awhi l e and decided to start learning by attempting a game. I found a decent tutorial for a space shooter and used it to create the basic code (firing, etc...) and now I've been figuring out how to add other elements (splash screen/scrolling screen).now I'd like to add power-ups but can't figure out how.I've created a graphic, turned it into a movie clip, but can't think of what to define for its actions.
View 2 RepliesActionScript 3.0 :: Capture Power Of Sound
Sep 3, 2011I have a problem with the sound capture of my Microphone in Actionscript 3.0.Particularly I would like to capture the "power" of sound, better if in decibel.Does a method / attribut of class Microphone exist.
View 6 RepliesFlex :: Power Function Fit To Data Set
Jun 6, 2010I have a set of data (in ArrayCollection) and I need to fit a power function { f(x)= B + x^alpha } to it, before display in LineChart. As result I need the alpha and B paremeter.
View 1 RepliesAS3 :: C - Implementation Of Upper Power Of Two Algorithm
Mar 1, 2011I have been trying to implement the Round Up Power Of 2 algorithm outlined in the following link in AS3.
[Code]...
The algorithm works great for most of the values I've tested. It is mentioned that this will return 0 when given an input value of 0 which is technically incorrect but I'm ok with that output. What I'm not ok with is when given an input of 1 I get and output of 1. I'm thinking that this must be a caveat of AS3 and its wonky uint implementation but I can't seem to figure it out. I have also tried using the >>> logical shift operator to the same result. My C is a little rusty, but I'm not sure how this would even return 2 in C. Can someone explain to me whats going wrong here? I assume if an input of 1 was a special case it would have been mentioned in the above link.
ActionScript 2.0 :: Saving Processing Power [MX]?
Nov 4, 2002I have an MC that occurs many times on the stage, and each one has a motion, and random scaling script in it. Would I save computing power by not having a script in each MC but rather assign them all to a prototype?
View 14 RepliesActionScript 3.0 :: Flash To Mimic Power Point?
Dec 10, 2008I need a good Flash strategy for creating an ordinary PowerPoint presentation. We always need very media-rich presentations (PP is weak in this area). So far we have relied on embedding a Flash object in PP. This turned out to be a bad move because many of our clients deal with the Defense Department and are not allowed to D/L and install the latest Flash player. I have found that publishing a Flash movie projector (.exe) that advances slides like a PP is a good solution. The problem is that I have to put buttons on each slide and write unique functions to advance the slides I would like to be able to simpley click the mouse or use the arrow keys (like PP) for navigation. Should I use the "Flash Slides Presentation" template?
View 2 RepliesActionScript 3.0 :: Representing 3D Objects - Processing Power?
May 20, 2010I'm making a 3D program and I've already made the back end which calculates where each object's polygons should be. However, I can't seem to find a quick way of drawing them without having to remove and redraw them each time, which I'm sure would take a lot of processing power, knowing the way that Flash does things. So is there a way to draw a shape (a quad in this example) and then alter the shape's color and the position of all of its corners in the next frame without taking a huge load of processing power? I would really like to be able to do this to at least 20 polygons, hopefully more, within the span of one frame at 20 fps.
View 3 RepliesActionscript 3 :: Shooting Projectiles Given An Angle And Power?
Dec 31, 2011I'm doing a prototype game like Worms and I would like not only to shot, but also see the whole projection curve where my shot will travel before it hit the ground. The only information given by the player is an angle and a power. There is also some level elements like wind and gravity.
Can I have a code for the projection curve? its like a parabola I think. I research about parabola but I had some difficult to apply these math formulas into the programming code.
ActionScript 2.0 :: Math Power Function In Flash 8
Apr 9, 2006How can I make Flash calculate the value of the function y= (1 - x^2)^3 where x is the user input value?
View 3 RepliesActionScript 3.0 :: Deleted Objects Still Taking Processing Power
May 2, 2010I have this little crumby thing I'm working on. And in it, I draw a circle with a radial gradient fill. Then I add that circle to the array: "colourSplodeArray"
I have another circle that bounces around and hits walls, "creating" the previously mentioned circles. (So I have one that is not in the array, the rest are)[code]...
Professional :: Make An Animation Of Electricity Going Through Power Lines?
Aug 26, 2011[URL]I'm trying to make an animation of electricity going through power lines.. (and just drawing lines in general) and I like how it was done in this video. I'm just not sure how to go about doing it.
View 1 RepliesActionScript 2.0 :: Math Power Function - Where Both X And Z Are User Input Values
Oct 30, 2008I want to make a function like y= (1 - x^z), where both x and z are user input values. How is that possible?
View 1 RepliesProfessional :: Feature To Disable System Screensaver & Power Saving Features
Nov 20, 2007Please provide the feature to disable the system screensaver & power saving features while a video object is currently playing a video. I get this request all the time when developing video players and now that the netflix player provides this feature it is becoming a must have in the online video market. If you know other solution which does not require .net, silverlight , or any other browser plugin besides flash please let me know.
View 1 RepliesFlash :: Python - Text-based One-on-one Chat With Interface: What To Power The Backend
Apr 22, 2010I'm building a website where I hook people up so that they can anonymously vent to strangers. You either choose to be a listener, or a talker, and then you get catapulted into a one-on-one chat room. The reason for the app's construction is because you often can't vent to friends, because your deepest vulnerabilities can often be leveraged against you later on. (Like it or not, this is a part of human nature. Sad.)
I'm looking for some insight into how I should architect everything. I found this neat tutorial, [URL], which suggests using python & stackless + flash. Someone else suggested I should try using p2p sockets, but I don't even know where to begin to look for info on that.
Java :: Get Started On A Simple Physics Based Game (with Angle / Power)?
Nov 28, 2011Basically there will be a club and a ball. You can control the power and angle to hit the ball. How do I go about implementing this? Is flash the easiest way to go? I want to implement this as a facebook game. Any game libraries specific to this I can use to quickly implement a basic version? I am comfortable with Java and PHP.
View 1 RepliesActionScript 3.0 :: Power And Angle To Shoot The Arrow Back - Changing Distances Between The Player
Sep 24, 2010So I've set myself a little project to build a bowman game. Everythings working smashing until the math at the point where the computer needs to figure out the power and angle to shoot the arrow back at you. What I've been working off is my knowledge from applied-math classes in school. I've been using the following formula where g is gravity, t is time (this would be in frames for flash), sx is the distance between the players, u is the initial force of the arrow and a is the angle we need to find. With a bit of moving around to seperate the angle, this becomes For my AS3 this translates to:
[Code]...
What happens is that it always fires the projectile at a very low angle that doesnt change to match the correct circumstances and I can't figure out how to get around this. Changing the force doesnt make any difference and the program will need to get around changing distances between the player so this math is pretty necessary (I think). Any math heads out there know what I should change?
ActionScript 3.0 :: External SWF's In FlashBuilder
Mar 24, 2010i have 2 questions / problems with loading external SWF's. (Im developing in FlashBuilder btw)first, i load the swf's binary with an URLLoader, and later on i 'duplicate' them using a Loader.loadBytes.This way i can load an swf once, and display it multiple times.Every time i 'duplicate' those SWF's, flashbuilder traces [SWF] <<PATH>> xx.xx.xx bytes after decompression.Usually, this traces the path of the loaded SWF, I.E. background.swf. But now i get the path of my main SWF, called Main.swf (how suprising.is this correct? or what causes it to trace Main.swf instead of the actual loaded SWF?Besides this 'issue', sometimes i get a [Unload SWF] after i do a Loader.loadBytes. then my new copy of the SWF isn't made. I get no errors NOR any events from the loader.loadBytes.
View 1 RepliesAdd A Namespace To ValueObjects Using FlashBuilder?
Jul 1, 2011When I use FlashBuilder to connect to a remote Java object using BlazeDS, FlashBuilder automatically creates a local valueObject matching the object in the remote server.
However, the package name of the remote object gets lost in translation.
Hence if I have two remote Java objects com.foo.A and com.bar.A, I won't be able to distinguish between them in Flex. So I end up having to name my remote classes com.foo.AFoo, com.bar.ABar.
Flex :: Trace() Is Not Working In Flashbuilder 4?
Dec 18, 2009i'm trying to use actionscript 3.0 and using trace(), it never outputs content of trace of variable either in flash player or in output area? how to coorect or should i enable something?
View 3 RepliesFlex :: Transitioning From FlexBuilder 3 To FlashBuilder 4?
Mar 24, 2010It's growing pains time again. Some of our stuff requires FlashBuilder 4 and some still requires FlexBuilder 3. Both are installed OK, and no projects use both IDEs. The trouble is, when I go back to work on a FlexBuilder 3 project it takes freakin' forever to build and I get weird errors like these: This doesn't seem to cause any identifiable problems except to throw up a modal dialog at various points in the build process, forcing user interaction. But I do notice that memory fills up fast in FB3 and generally FB3 starts behaving strangely and ultimately quits once it gets up over 700MB.
This is only a temporary bridge situation until we get all projects into FB4, but "temporary" could mean weeks if not months. Does anyone have any advice for how to get through this bridge period? Is there anything I can do to make these two IDEs work and play well together? Failing that, does anyone know what "java.lang.String" is the "reason" for the problem? Does Eclipse have a resource bundle somewhere that is getting corrupted when i go back and forth between the two?
Php :: FlashBuilder 4 And Zend Framework Error?
Jun 11, 2010I am trying to use adobe flash builder 4 with a php service.I had it set up an older macbook running leopard, but just tried to set it up on my new laptop running snow leopard.I did all the same steps.. set the Flex Server to be PHP, set the web root and url.Then I go to Data->Connect To PHP and point it to a php file I have in my web root. It says it needs to install Zend, and claims it does so successfully, but then when I try to continue, I get an error.I don't understand.. this same setup works on my older laptop.
(Yes, I checked the amf.production was false)
Unable to retrieve operations and entities from the file
Make sure that Zend Framework is installed correctly and the parameter "amf.production" is not set to true in the amf_config.ini file located in the project output folder.code]....
Php :: Dynamically Populating Textfields In Flashbuilder?
Jul 13, 2010I'm trying to wrap my brain around getting data into my project in a way that I can use.. I want to use MySQL & PHP my Flashbuilder app and I'm not populating a datagrid so......
For simplicities sake, In my database table I have 3 columns "ID, Title & Content". I want to use this to populate the different states in my flashbuilder project.
Normally in a web page I could say in the sql statement "SELECT * FROM table WHERE ID = 1" to get the first row of info and I could put my Title and Content where I want them on my page I can change the query to "SELECT * FROM table WHERE ID = 2" to populate page 2 to get it's title and content.
In flashbuilder it all on the same page and I'm not understanding how to populate a singular text field for a title or content area with a single field from the database.
Actionscript :: Flashbuilder Changing Id Of A DataProvider?
May 20, 2011I'm using Flashbuilder for this. I have a button that changes the id of a dataProvider like this:
result.datagrid.dataProvider="lineup_1";
However, i have another button which should also change the id of the dataprovider when clicked on, but to this:
result.datagrid.dataProvider="lineup_2";
However, it only responds to the first button pressed on. After that, the id stays the same, which is logic.but i need to know how i can change the id after a button is pressed too.
Actionscript 3 :: Using FXG With FlashBuilder 4.5 On Mobile Project?
Aug 1, 2011I've been successfully building AS3 projects that import FXG graphics using FlashBuilder 4 for web. I'm now upgrading to FlashBuilder4.5 so I can build mobile apps but I'm getting an error when I try and using FXGs.The error is ,The definition of base class SpriteVisualElement was not found. [Generated code (use -keep to save): Path: datagold-interface.as, Line: 6, Column: 27].The line and column number don't seem to relate to anything I can understand..
View 2 RepliesFlex :: AddEventListener Not Working Flashbuilder 4.5
Oct 26, 2011I'm doing everything by the book (I think), I've reviewed this problem multiple times, but I can't seem to get it fixed. The creationCompleteHandler function is b
[code]....
Flex :: BackgroundDisabledColor Error When Upgrading From FlashBuilder 4?
Apr 30, 2010I've upgraded a FlexBuilder3 project to FlashBuilder4, and I am seeing many compilation errors regarding unsupported tag attributes:
The style 'backgroundDisabledColor' is only supported by type 'mx.controls.TextInput' with the theme(s) 'halo'
Here is the offending mxml element:
<mx:TextInput x="245" y="86" id="code1" maxChars="15" change="enableButton(event)" cornerRadius="9" borderStyle="solid" backgroundDisabledColor="#7977b6" />
what is the best workaround for this particular error? I was able to easily resolve a similar error with the "backgroundColor" attribute by changing it to "contentBackgroundColor", and was hoping there was a simple workaround for backgroundDisabledColor as well. I realize I can apply a css style, but I'd rather have a simpler solution as there are many many other attribute errors similar to this one.