Actionscript :: Flashbuilder Changing Id Of A DataProvider?

May 20, 2011

I'm using Flashbuilder for this. I have a button that changes the id of a dataProvider like this:

result.datagrid.dataProvider="lineup_1";

However, i have another button which should also change the id of the dataprovider when clicked on, but to this:

result.datagrid.dataProvider="lineup_2";

However, it only responds to the first button pressed on. After that, the id stays the same, which is logic.but i need to know how i can change the id after a button is pressed too.

Similar Posts:

Flex :: Animating A LineChart Based On Changing DataProvider

Jul 7, 2011

I need to be able to animate a LineChart based on the SeriesInterpolate data effect (I will have an Array of dataproiders). I want to have a "Play" button that will:

initialize the LineChart with the first dataprovider in the array start the animation and wait for the animation to finish before loading the second data provider repeat the process until all data providers in the Array are loaded

Actionscript 3 :: Handle Unhandled #2044 Errors From Flash Tilelist When Changing Dataprovider?

Jul 9, 2010

I have a tilelist component using a custom ImageCell based item renderer. I know that at times some of the images it is trying to retrieve will not be found and I am able to handle this via an IEOrror listener on the custom ImageCell loader.However, if I set the data provider, then it is changed before all images have completed their loading or error process, the flash debug player throws up an unhandled #2044 error in firefox stating that an image could not be found. In opera with the debug player it throws a #2044 stating that a load never completed.I can't find a way to trap and ignore these errors so they don't throw the debugger player dialogue up. Also, when using the Flash Builder IDE to debug, the debugger doesn't break on these errors at all - it's only in the player while I'm able to break on other errors without problem.It is as if the error listener is being disposed of when the dataprovider changes, but the loader continues and throws an unhandled #2044.

Flex :: Changing Dataprovider Of A Datagrid On Change Event Of Another Datagrid?

Oct 15, 2011

I have two datagrids:

- Division
- Members

Both have single columns. Selecting one item from Divsions datagrid should display members of that Division in the Members datagrid. But following code has some problem and Members of a particular division do not show up when respective Divsion is clicked.

Following are some snippets of the related code. Hope someone can spot an error in it.

[Code]..

Flex - Add Row To Flex DataGrid Without Changing DataProvider

Sep 30, 2010

I am creating the standard "Click to add row" control but I really don't want to dirty the dataProvider with a "placeholder" since it is bound to the model and could end up in the database. Is there a way to add a row that isn't represented in the dataProvider? I started down the road of adding an item directly to listItems but then that needed an item in rowInfo and then that need a reference in rowMap.

ActionScript 3.0 :: External SWF's In FlashBuilder

Mar 24, 2010

i have 2 questions / problems with loading external SWF's. (Im developing in FlashBuilder btw)first, i load the swf's binary with an URLLoader, and later on i 'duplicate' them using a Loader.loadBytes.This way i can load an swf once, and display it multiple times.Every time i 'duplicate' those SWF's, flashbuilder traces [SWF] <<PATH>> xx.xx.xx bytes after decompression.Usually, this traces the path of the loaded SWF, I.E. background.swf. But now i get the path of my main SWF, called Main.swf (how suprising.is this correct? or what causes it to trace Main.swf instead of the actual loaded SWF?Besides this 'issue', sometimes i get a [Unload SWF] after i do a Loader.loadBytes. then my new copy of the SWF isn't made. I get no errors NOR any events from the loader.loadBytes.

Add A Namespace To ValueObjects Using FlashBuilder?

Jul 1, 2011

When I use FlashBuilder to connect to a remote Java object using BlazeDS, FlashBuilder automatically creates a local valueObject matching the object in the remote server.

However, the package name of the remote object gets lost in translation.

Hence if I have two remote Java objects com.foo.A and com.bar.A, I won't be able to distinguish between them in Flex. So I end up having to name my remote classes com.foo.AFoo, com.bar.ABar.

Flex :: Trace() Is Not Working In Flashbuilder 4?

Dec 18, 2009

i'm trying to use actionscript 3.0 and using trace(), it never outputs content of trace of variable either in flash player or in output area? how to coorect or should i enable something?

Flex :: Transitioning From FlexBuilder 3 To FlashBuilder 4?

Mar 24, 2010

It's growing pains time again. Some of our stuff requires FlashBuilder 4 and some still requires FlexBuilder 3. Both are installed OK, and no projects use both IDEs. The trouble is, when I go back to work on a FlexBuilder 3 project it takes freakin' forever to build and I get weird errors like these: This doesn't seem to cause any identifiable problems except to throw up a modal dialog at various points in the build process, forcing user interaction. But I do notice that memory fills up fast in FB3 and generally FB3 starts behaving strangely and ultimately quits once it gets up over 700MB.

This is only a temporary bridge situation until we get all projects into FB4, but "temporary" could mean weeks if not months. Does anyone have any advice for how to get through this bridge period? Is there anything I can do to make these two IDEs work and play well together? Failing that, does anyone know what "java.lang.String" is the "reason" for the problem? Does Eclipse have a resource bundle somewhere that is getting corrupted when i go back and forth between the two?

Php :: FlashBuilder 4 And Zend Framework Error?

Jun 11, 2010

I am trying to use adobe flash builder 4 with a php service.I had it set up an older macbook running leopard, but just tried to set it up on my new laptop running snow leopard.I did all the same steps.. set the Flex Server to be PHP, set the web root and url.Then I go to Data->Connect To PHP and point it to a php file I have in my web root. It says it needs to install Zend, and claims it does so successfully, but then when I try to continue, I get an error.I don't understand.. this same setup works on my older laptop.

(Yes, I checked the amf.production was false)

Unable to retrieve operations and entities from the file

Make sure that Zend Framework is installed correctly and the parameter "amf.production" is not set to true in the amf_config.ini file located in the project output folder.code]....

Php :: Dynamically Populating Textfields In Flashbuilder?

Jul 13, 2010

I'm trying to wrap my brain around getting data into my project in a way that I can use.. I want to use MySQL & PHP my Flashbuilder app and I'm not populating a datagrid so......

For simplicities sake, In my database table I have 3 columns "ID, Title & Content". I want to use this to populate the different states in my flashbuilder project.

Normally in a web page I could say in the sql statement "SELECT * FROM table WHERE ID = 1" to get the first row of info and I could put my Title and Content where I want them on my page I can change the query to "SELECT * FROM table WHERE ID = 2" to populate page 2 to get it's title and content.

In flashbuilder it all on the same page and I'm not understanding how to populate a singular text field for a title or content area with a single field from the database.

Actionscript 3 :: Using FXG With FlashBuilder 4.5 On Mobile Project?

Aug 1, 2011

I've been successfully building AS3 projects that import FXG graphics using FlashBuilder 4 for web. I'm now upgrading to FlashBuilder4.5 so I can build mobile apps but I'm getting an error when I try and using FXGs.The error is ,The definition of base class SpriteVisualElement was not found. [Generated code (use -keep to save): Path: datagold-interface.as, Line: 6, Column: 27].The line and column number don't seem to relate to anything I can understand..

Flex :: AddEventListener Not Working Flashbuilder 4.5

Oct 26, 2011

I'm doing everything by the book (I think), I've reviewed this problem multiple times, but I can't seem to get it fixed. The creationCompleteHandler function is b

[code]....

Flex :: BackgroundDisabledColor Error When Upgrading From FlashBuilder 4?

Apr 30, 2010

I've upgraded a FlexBuilder3 project to FlashBuilder4, and I am seeing many compilation errors regarding unsupported tag attributes:

The style 'backgroundDisabledColor' is only supported by type 'mx.controls.TextInput' with the theme(s) 'halo'

Here is the offending mxml element:

<mx:TextInput x="245" y="86" id="code1" maxChars="15" change="enableButton(event)" cornerRadius="9" borderStyle="solid" backgroundDisabledColor="#7977b6" />

what is the best workaround for this particular error? I was able to easily resolve a similar error with the "backgroundColor" attribute by changing it to "contentBackgroundColor", and was hoping there was a simple workaround for backgroundDisabledColor as well. I realize I can apply a css style, but I'd rather have a simpler solution as there are many many other attribute errors similar to this one.

Flex :: Flashbuilder 4 Gumbo States Are Sometimes Blank?

Nov 19, 2010

Below is a very simple example, randomly, if I click the step2 button the state will change but the Step 2 panel will not be there.

I suspect the children of the state are not getting created for some reason, which is why I set the itemCreationPolicy to "immediate", but it makes no difference This is catastrophic for the application because the user is left in limbo and is forced to refresh

<s:BorderContainer xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
creationPolicy="all" currentState="step1">

[code]....

Flex :: Error When Migrating A FlashBuilder Project To FDT?

Dec 6, 2010

I'm migrating a FlashBuilder project (actually a project I'm working on with FlexBuilder eclipse plugin on Linux) to use FDT. I managed to import the project, and make it aware of other projects it depends on.

However I get lots of compile errors for things that seem harmless (and used to compile). At least, for example :

<mx:SomeClass initialize="{this.init()}" ... >
<mx:Script>
<![CDATA[

[code]....

So, I get "unresolved function" for all the calls of the form someAttribute="{this.someFunction()}", even though the function is described in the same block file. Is it that I've been abusing AS3 / FlashBuilder for all this time ?

Also, generic components have problem. Assume I have a class with a deferred 'content' attribute, and I want to instanciate this class and "fill the blank" : I define a custom component in a CustomComponent.mxml file, with a deferred content

<mx:VBox>
<mx:Script>
<![CDATA[
public var content : IDeferredInstance;

[code]....

I'm using FDT 4.0, under Linux, with a (valid) eval key I'm using a custom Flex 3.5 SDK (not one shipped with FDT, but not a too strange one either)

Actionscript 3 :: Class - Use External Classes In FlashBuilder?

Jan 30, 2011

I'm trying to implement CSVLib in an Air application and am getting an error that seems wholly illogical to me. "1120: Access of undefined property csv." and "1120: Access of undefined property completeHandler."

The only thing I can think is it's not importing the csv class properly, or the class itself is broken somehow? I know my import path is correct because I typed it out directly based on automatic hinting. The code below is copied directly from the how-to wiki on the csv lib site.

[Code]...

Flex :: Consume A REST Web Service With Flashbuilder 4?

Apr 21, 2011

I am creating a Restful WCF web service which will need to be consumed by FlashBuilder 4. Is this possible? If so, how can I go about doing that?

Flex :: Spark Form Not Showing Up In Flashbuilder 4

Jun 9, 2011

I am going through the flex in a week training and I'm trying to use the Spark form in Flashbuilder 4, but it does not appear in the components windows. When I drag a form from there it is an mx form control. The project is set to use the 4.5 sdk and I can even create the tag in the code view, but when I do that is doesn't show up in the designer... How can I get the spark form control to either show up in the designer when created in the code view, or get the control to show up in the components window so I can drag it in?

Actionscript 3 :: Compiling Project To Swc File In Flashbuilder?

Jun 23, 2011

i have a question and i'm hoping to find an answer here, i created a flashbuilder project that contains some classes with functions that i use often, i have around 6 classes, would it be possible to compile these classes to a swc file so i just have to add the swc in a new project to access them?

Or isnt it possible to create swc's with flashbuilder? Maybe i could do it in flash but dont have any idea how to compile multiple classes into 1 swc. file.

Sorry if this is a stupid question but ive never used it before and couldnt find much about is.

Actionscript 3 :: AIR / FlashBuilder - How To Release Socket On Exit

Sep 6, 2011

When I exit from the debugger and relaunch I often get the message:

Error: Error #2002: Operation attempted on invalid socket.
at flash.net::ServerSocket/internalBind()
t flash.net::ServerSocket/bind()

I usually have to wait a while before I can relaunch the application without the error.

private function openConnection():void
{
_serverSocket = new ServerSocket();
_serverSocket.addEventListener(ServerSocketConnectEvent.CONNECT, onConnect)

[code].....

FlashBuilder 4.5 :: Render Text Without Lifecycle For Upsampling

Sep 8, 2011

I need to find a way to "upsample" text from 72dpi (screen) to 300dpi (print) for rendered client generated text. This is a true WYSIWYG application and we're expecting a ton of traffic so client side rendering is a requirement. Our application has several fonts, font sizes, colors, alignments the user can modify in a textarea. The question is how to convert 72dpi to 300dpi. We have the editior complete, we just need to make 300dpi versions of the textarea.

1) Get textarea and increase the height, width, and font size by 300/72. (if ints are needed on font size I may need to increase the font then down-sample to the height/width)

2) use BitmapUtil.getSnapshot on the textarea to get a rendered version of the text.[code]

Actionscript 3 :: Flex - Skeleton Animation In Flashbuilder?

Jan 16, 2012

I have to animate a hand(upto wrist) for keyboard playing. It has to be done in runtime of the project. For making it more clear, I have saved all the informations in a file about the animation(time, position of fingers etc). How can I animate the fingers(wrist included)? I also need to know how to use a 2D hand with bones in flex.

Actionscript 3 :: FlashBuilder: How To Embed Graphics For Preloader

Mar 1, 2012

I develop a project in FlashBuilder. The graphics and UI elements i create in the Flash IDE and give them Export Classnames. then I put the SWC in the library paths of the FlashBuilder project and create the UI elements by instanciation. Now I want to add a Preloader for the application. I follow this article, which works: [URL] My question is now: I also need some graphics for the preloader. But how do I ensure that the graphics for the preloader will be loaded first, such that the preloader class can start as soon as possible?

ActionScript 3.0 :: Have Classes In Separate Files Like In Flashbuilder

Sep 29, 2010

In flash cs5 can you have AS3 classes in separate files like in flashbuilder. I just want to make games with just actionscript and no flex/authorscript

Actionscript 3 :: FlashBuilder: Embed Graphics For Preloader?

Jan 15, 2005

I develop a project in FlashBuilder. The graphics and UI elements i create in the Flash IDE and give them Export Classnames. then I put the SWC in the library paths of the FlashBuilder project and create the UI elements by instanciation.

Now I want to add a Preloader for the application. I follow this article, which works:

[URL]

My question is now: I also need some graphics for the preloader. But how do I ensure that the graphics for the preloader will be loaded first, such that the preloader class can start as soon as possible?

ActionScript 3.0 :: FlashBuilder Will Be Directly Applicable To Flash CSx - Correct?

Apr 20, 2010

I'm heads down working with the FlashBuilder tool which is heavy AS3, and have used Flash CSx for years. My question: I'm assuming my AS3 skills that I develop with FlashBuilder will be directly applicable to Flash CSx, correct? I understand I'll need the context of applying my AS3 code to the Flash objects when working in Flash CSx but for the most part will my AS3 skills carry over from FlashBuilder to Flash CS4/5?

Xml :: Flex - Flashbuilder 4 Won't Copy An Xml File In Release Build?

Jul 20, 2010

I have my own conf.xml file (src/conf/conf.xml) consists some properties (alphas, colors,etc). When i try to export release build, I see list of files which not includes that file.Why? When i run my application at debug it file places in "bin-debug" folder.

Flex :: Flashplayer Processes Not Closing When Testing In Flashbuilder?

Jul 28, 2010

Having this new problem with flash builder where I run a debug flashplayer, close out the flash and it doesn't always kill the process. Sometimes it does sometimes it doesn't, leaving me, after a while, having 10 or more flashplayer tabs on windows still open. I try to close them using the task manager with no luck.

Flex :: Get FlashBuilder To Show The Command-line Output?

Nov 8, 2010

Specifically, I want to know what the commands are... all the flags it produces and passes to mxmlc.

Copyrights 2005-15 www.BigResource.com, All rights reserved