I've searched but haven't found anyone wanting to do this with a bitmapData object.I'm using the following code:
matrix.identity();
matrix.translate(pan.x, pan.y);
matrix.translate(-zoomPoint.x, -zoomPoint.y);[code].....
Panning works, but using this method scale does not scale around my mouse.Has anyone done this successfully?
I'm trying to resize each image without success. After pulling my hair a few time, I can't figure out to make the smoothing works on Stage. Basically I want to be able to resize any pics: 600x900 -> 400x600
Code: Select all // Call LoadBitmap class, bitmapWidth & bitmapHeight are the desired 400x600
loadBitmap = new LoadBitmap(bitmapWidth, bitmapHeight);
loadBitmap.loadBitmapData(theImage);
[code]....
I'm using a transform matrix as part of a bitmap draw to select an area of my target rather than drawing from 0,0:
var bmd:BitmapData = new BitmapData(target.width,target.height,true,0);
var mat:Matrix = new Matrix(1,0,0,1,-target.x,-target.y);
bmd.draw(this,mat);
[code]......
how to scale down flash images using BitmapData and Matrix?? I'm using it for fullscreen so that the images are always perfect. I've been tampering with this, but cannot get it to work properly.
View 3 RepliesI have a point which is 3,5 I want to scale, or multiply this point, by a factor of 5. To give me 15,25 What I'd really like to be able to do is: mypoint *= 5; but that doesn't work. I can't find any suitable method in the point class either. So what I'm trying to do now, which all research indicates should work, is:
[Code]....
basically just wondering if its possible to scale an MC about the center of the stage as opposed to the top left of the MC? I thought about setting the X & Y as stage width / 2 + MC width / 2 but cant as the user needs to be able to move the MC which is much bigger than the stage and zoom in on a point in the center rather than just the center of the MC.
View 2 RepliesI have a movieclip on stage that I draw into a bitmap, how do I change the registration point, the code below produces bitmap with half chopped off:
var bitmapData:BitmapData = new BitmapData(mc.width, mc.height, true, 0x00FFFFFF);
var matrix:Matrix = new Matrix();
matrix.translate(0, -mc.height/2);
[Code].....
I've created an mc which functions as my map and controls to go with that which allow the map to be moved around and key points navigated to and zoomed in on at varying zoom levels.I'm using scaleX and scaleY to scale the map mc and a list of x and y positions to correctly position the map for each key point.When I want to go to a certain area I perform this calculation (offsetX and offsetY are the center of the screen):
newX = posX * scale + offsetX;
newY = posY * scale + offsetY;
Then I tween the position and scale of the map to smoothly scale and move the map to the correct position:
var tween = new TweenLite(_background, EASING_SPEED, {x:newX, y:newY,scaleX:scale.getScale(),scaleY:scale,ease:EASING_TYPE,onComplete:moveToComplete,onCompleteParams:[room]});
I now need to implement a zoom in / out function and this is what I'm struggling with. The zoom should use the center of the screen as the reg point for the scale, so I've been trying something along the lines of the following to get the correct positioning:
var newX = offsetX - (offsetX - _background.x) * scale;
var newY = offsetY - (offsetY - _background.y) * scale;
So in my mind this gets the distance from the current position of the map relative to the center point of the screen (offsetX, offsetY) then scales that distance by the new scale. However, this is clearly wrong because it's not working and the positioning of the map is wrong.I've also tried using a transform matrix to get the correct values but I know even less about them and not got the right results.
function scale(target:MovieClip, center:Point, scale:Number):Point {
var m:Matrix = new Matrix();
m.translate(-center.x, -center.y);//move the center into (0,0)
[code]....
I'm trying to add some zooming functionality. The problem is that when you zoom in and out, it scales the MC up and down from where the registration point is. This means That when I'm far from the position of the registration point instead of zooming the in straight it also makes it appear as if you are travelling towards the registration point.
To offset this effect I want to calculate the amount of pixels I need to offset the Map by so that it appears as if you are zooming in directly.
So just as a test I've put a little ball inside the map(called "center") which I'm trying to keep in the center of the map.[code]...
I have attempted to make a movieclip scale in the y axis using _yscale but I can't seem to make it scale to the exact mouse co-ordinates.
Its within a rotating movie clip (controlled by the position of the mouse) and that works fine.
Here's the code I'm using at the moment.
Code:
onClipEvent(enterFrame){
var disty = this._y - this._ymouse
var dist = Math.sqrt(disty*disty)
this._xscale = 100 + dist;
}
I have developed a flash app in AS3 that allows you to drag objects around on stage, save,and load them. When the "save" button is pressed, it then loops through each item on the stage and gets the coordinates (x and y) for the bottom left corner and the top right corner. Code:
Code:
ActionScript Code:
var bottomLeft:Point = new Point(-50, -50);
[code]........
I am working on an application that will allow a user to scale an image. The issue that I am having with the method below is that the scaling is always taking place on the previous scale point. For example: If I scale the image up one and then scale the image down one. I have to scale down twice to get it back to the point I want it to be.
Here is my current code:
private var sourceBMD:BitmapData = testImage.source as BitmapData
private var matrixScaleX:Number = 1;
private var matrixScaleY:Number = 1;
private var baseScaleX:Number = .05;
private var baseScaleY:Number = .05;
[Code] .....
I'm trying to convert a Sprite that I have into BitmapData so I can perform some collision detection. There are a few things about the way the Sprites are used that is making this more difficult than I expected:
The Sprite itself is a container which holds another Sprite that actually has a box drawn in it. The inner Sprite is positioned negative half its width & height so that it can be rotated from the center via the container. The container may be rotated at any angle at any given time
So my approach thus far has been attempting to draw the outer Sprite onto a new BitmapData object with a Matrix to account for the difference. Whilst I can use a Matrix to make this work for one particular rotation angle, I cannot find a way to make it work for any rotation.
Here's what I'm doing to draw onto the new BitmapData:
var p:Product = getProduct(); // Product is the container with the inner sprite
var bounds:Rectangle = p.getBounds(stage);
var bd:BitmapData = new BitmapData(bounds.width, bounds.height, true, 0x00FFFFFF);
[Code]....
Translating by the same amount as the previous example will no longer work here, and the box will still be cut off. I've looked around at some solutions posted before or suggestions from other people but they don't seem to work for me due to my container Sprite and rotation.
I'm trying to make a text effect where on every frame the textfield increases in size and decreases in opacity. I'm using the scaleX and scaleY properties of my dynamic textfield to enlarge, but it's doing so keeping the left registration point fixed. I want to make it scale up radially outward, or with the center point fixed.
View 4 RepliesThere is an Image control that when I click on it I need to zoom in (using the center/transform point where the mouse is clicked). I have the zoom transition working great, but when I set transformX & tranformY (with autoCenterTransform false) it doesn't zoom into that point.
Here is my code that only zooms in (not to a specific point)
<fx:Script>
<![CDATA[
protected function imgLogo_clickHandler(event:MouseEvent):void {
transformer.play();
} ]]>
[Code] .....
1. Is there a way to scale up an object from its center even if its registeration point is at the top left? can that be done using TweenMax?2. can I apply the same tween on two objects at the same time? basically what I want to do is load up an image to the stage, and then tween its scale from 0 to the original size along with another movie clip behind it that would form some sort of a border for the image. and I want to scale them up from the center.
View 5 RepliesWhen you load a object through flash, you can set the rotational/scale point, but when you load it as a loader object or sprite, how do you change this point?
In this instance, I want to change the height of a sprite that is filled with a rectangle so that it shrinks down, not up.
Right now:
var colored_bar:Sprite = new Sprite();
with (colored_bar.graphics) {
beginFill(0x9e1819, 1);
[Code]....
The way I am doing it currently is moving the y position everytime I take away soem of the height, so it looks like it's moving down, but I'd think moving the orientation point at the beginning would be faster
I want to make an editor like this site. [URL] If you browse this link you will find "Button. If you press this button you will navigate to a editor to design your layout. After draw a rectangle or circle or line you can resize that or can rotate that. When you finish if press the "you will back to the previous page where your desinged layout display. If you press the "" again then you will navigate the editor with the previously designed layout. I want to make a site like this. I want to use the flash cs4 to make the editor. Anybody knows how to draw a rectangle or circle shape with mouse and how to scale by setting the point and how to rotate by setting the rotation point also by using flash cs4 and as3?.
View 3 RepliesI'm using Flash 8, with this code in the first frame:
import flash.display.BitmapData;
rissa._x=Stage.width/2;
rissa._y=Stage.height/2;[code].....
When I publish the file, I'm getting the following error message in the Output panel:
**Error** Scene=Scene 1, layer=Layer 2, frame=1:Line 7: The class or interface 'BitmapData.loadBitmap' could not be loaded.
var plaid:BitmapData.loadBitmap("plaid");
Total ActionScript Errors: 1 Reported Errors: 1
I am trying to use the reflect class from "http://pixelfumes.blogspot.com/2007/03/reflection-class-v3-with-source .html" but I keep getting this error:
ArgumentError: Error #2015: Invalid BitmapData.
at flash.display::BitmapData()
at Reflect()
at Site_fla::GalleryPage_29/loadThumbs()
at Site_fla::GalleryPage_29/sortXML()
[Code]...
btw, first I used assigned thumbContainer as the mc argument (outside the loadThumbs() function) and it worked but not exactly what I wanted... because I thought it is supposed to update when the movieclip is animated but it actually didn't... when I use a scroller, only the thumbs that are first loaded to the stage get the reflection..
I've been using BitmapData.copyPixels() to draw graphics onto a canvas (Bitmap).I need to rotate the resulting graphics without the use of draw() because it's vastly slower.How can I rotate the target graphic? I'm assuming that there might be a formula or library that I can use which will first reorganize the pixels that make up a graphic based on an origin (point) and radians.I'm pretty certain that I'm not capable of creating such logic, so if there are any known libraries that do this, that would be awesome.I'd like to achieve something similar to XNA's SpriteBatch.Draw() method, which accepts rotation as its 5th argument.
View 3 Replieshow to use the bitmapData collision method. Now I'm trying to figure out if there is a way to see at what angle or coordinate of the bitmapData the collision happens? I need it in order to figure the accurate bounce angle after the collision occurs.
View 2 RepliesI'm currently working on a flash game and I need to know how to addChild a BitmapData or draw a BitmapData to screen. If I can't than how can I give a DisplayObject my BitmapData?
View 2 RepliesScenario: main moveiclip with 4 other clips in it. I want the rolledover clip to scale up and all the others to scale down and blur.
Question: What is the most effiecent way to code this. Would it be a "for in loop"? I am trying to minimize the code and would rather not use a whole bunch of if then statements.
I want my flash content to scale when I scale my browser window.
View 5 RepliesI've made a mobile version of my software, with low-res images and such, and I can now fully buffer all my content (including a 360 frame animation which is buffered to memory). Problem is, that everytime I update the view, more memory is used.When I write image = new BitmapData();, does it store the previously created BitmapData's in memory? Do I have to flush the memory somehow before I draw my second picture in BitmapData?Example:
ActionScript Code:
// In this example I draw using the same bitmapData several times, also
//overwriting the first image. Do I have to somehow delete the data first, to
[code].....
How can I convert the current scale of the instance to 100% so I can easily "visualize" and manage the instance when I modify its scale? Here's the actionscript, it works, but I just want the temp._xscale and temp._yscale to be in percentages, not real numbers.
Code:
USflag.onMouseDown = function ()
{
var temp = USflag;
onEnterFrame = function ()
[code]....
One last thing, what's the tag you have to put that is designed for boxing actionscripts? I'm suing [ code ][ /code ]
I am having an issue with using BitmapData.draw(stage). I am getting the following error:
SecurityError: Error #2123: Security sandbox violation: BitmapData.draw: file:///C|/Documents%20and%20Settings/bla...bla...bla.swf cannot access null. No policy files granted access. Here is a portion of my code:
var bd:BitmapData = new BitmapData(2800, 2100); bd.draw(stage);//this is where the error happens All of the files referenced (.xml/.jpg/.swf) are located in the same local folder as the main .swf. How do I get around this error? The main objective is to print the stage using PrintJob(). I am using Flash Professional CS5.5 and publishing to Flash 10.0/10.1. Let me know if I need to supply any more info.
My Flash image will not scale.if you zoom in, it gets chopped up. if you zoom out, it has a big blank area.What should I change in order to have this Flash image scale just like the rest of the site? [URL]It is the Flash in the center.
View 1 RepliesIm pushing Point locations into an array to Shift em out later. like this:
tempmoves.push([new Point(roundx,roundy)]);
..
ob.movestoplayer = tempmoves;[code]....
What am i doing wrong?