Actionscript 3 :: Streaming A Video From A Certain Time?
Dec 22, 2011
Is that possible to streaming a video from a certain time.
For an example i want to start the video from the time of 1.23 min but its always start from 0 only
time= something in millisecond;
I gave nsStream.seek(time) but even its start from 0 only.This is because the stream is not available for that time.
So can we start video streaming from mentioned timing is that possible.
I don't want to use FMS or Red5 for this.I know there is a possibility using server.
View 1 Replies
Similar Posts:
Aug 18, 2010
why dynamic streaming taking too much time to switch video from lower bit rate to higher bit rate and vice versa. I am doing dynamic streaming in following ways -
var param:NetStreamPlayOptions = new NetStreamPlayOptions();
param.oldStreamName=oldStream();
param.streamName=newStream()
[code]....
I am using duel buffering and that is 3 seconds when video starts and 10 seconds when "NetStream.Buffer.Full". Video taking approximately 30-50 seconds to switch video and when I am calling the above code.
View 6 Replies
Feb 13, 2009
Is there a particular reason that when you stream a video your _netStream.time will misreport the elapsed time of the stream? I've tested streaming vs progressive download and discovered that while progressive netStream.time seems spot-on accurate the streaming netStream.time is behind the actual running time of the flv.
In other words, the video has played to completion and stopped, but the seek bar has only progressed 85% of the way through on a stream.
Is this something to do with the sample rate of the video, or some other encoding issue?
View 1 Replies
Sep 17, 2009
I am looking to broadcast live video and need a camera that is better than a simple webcam. It looks like they used to make video cameras that would register as webcams, but stopped making them.If you wanted to broadcast an event live, what would be a good camera to use?
View 5 Replies
Apr 10, 2011
I am streaming flash video and the dimension of the video is 1280 by 720 (same size as the stage)
but just before the video streams, there is a quick flash of the video (about 320px by 240px) at the top corner of the stage, and then it plays the videos at the correct size (which is 1280 by 720) .... a quick flash is the best way I can explain it.
This is my code:
function clicked(event:MouseEvent):void {
var video:Video = new Video();
addChild(video);
[Code]....
is there anyway I can stop that quick flash of the video .... so when I click on the button, it just plays the video, at the correct size?
View 4 Replies
Jun 10, 2011
I want to play smooth streaming video from IIS using the flash video player like e.g. jw flash player instead of silverlight player?Which video format should I use in this case? Can flash then play e.g a video via smooth streming encoded with microsoft encoder?Do you know some alternative video players, that combines flash and silverlight functionality (selected per java script) to use with flash and silverlight?
View 1 Replies
Jan 30, 2004
I am trying to make a flash movie and have it find a external movie to show. I also need to be able to change the location of the video without flash, so I think I have to use a seperate .as file.
View 6 Replies
Feb 18, 2010
I have loaded an external video with playback component in Flash CS4.
Now the question is do I need to add streaming script or not?
View 2 Replies
Oct 31, 2010
I need a flash video player for our public site where users will share videos.The video usage model is similar to youtube as far as video part is concerned.Users will upload and share videos. Users will browse and play all shared videos as well.The videos will be streamed from the server and our app is a .NET/C#/JQuery application.We have 3 options:
1) Either buy a commercial flash player
2) Customize a open source player or use free player and customize its gui
3) Develop our own (time consuming and last resort)
I am required to find a flash video player with these requirements:
Player should work in all major browsers (IE, FF, Chrome, Safari)
Player should have way to inject Advertisement clips when playing a video file
Light weight and easy to integrate
Must support streaming and scale
Plus all other basic features of a flash video player.
View 1 Replies
Apr 11, 2011
Possible Duplicate: Flash video player for video streaming.is there any good and open-source video player to be embed in as3, no flex, html, and js.i tried
f4player.org
https:[url]....but i found tons of bugs,if you know any comercial player, that would be awesome too.
View 1 Replies
Jul 28, 2009
I am working on a site that is intended to stream two or more flv simultaneously. The slightly different header clip should renew on entry to each page. When I publish the fla file it plays as intended. When I upload the swf file to the web only one of the videos are playing back. It does not matter if I import the video to a timeline, or stream it progressively from the server. Both clips are uploaded.
View 7 Replies
Jan 27, 2010
How do i reset netStream.time for a streaming .flv that was intiatied on the server side? It just keeps incrementing on me even after the streaming .flv is done playing.
View 4 Replies
Apr 8, 2011
Is it possible to play the video (mp4) in real time using some flash player? What I mean by in real-time is that player would receive data on the fly, not from alredy saved file but e.g. php script (which sends appropriate content-type header) THAT IS DOWNLOADING AND 'ECHO-ing' THE FILE AT THE TIME PLAYER PLAYS IT - like e.g. some kind of live stream.
View 3 Replies
Jul 19, 2010
I'm looking to duplicate the video-embedding technique shown on [URL], whereby they show the flash video to all platforms where flash is available, and only show the HTML5 player on mobile devices. (specifically, iphone / ipad)
Is there a browser-sniffing framework, or some other method available to accomplish this?
View 2 Replies
Jul 6, 2009
I've loaded a video into the FLVPlayback component and I'm looking for a way to get the total time and the time played so far and output them to two text fields so the end result would look something like "00:12/00:50".
Right now I'm defining the video by the components inspector but I'm eventually hoping to define this bit by actionscript as well.
View 6 Replies
Apr 4, 2011
using old AS2 code on an fms project.it seems that both server-side NetStream object and client-side NetStream object do not have a totalTime property.my goal is to determine when the flv has completed playing ( has reached the end visually );so I figured that comparing time to totalTime would work but there appears to not be a totalTime.
View 3 Replies
Aug 16, 2011
Iam doing a mp3 player, i want to play music while streaming. I have a probleme, i cant get time mp3 length of this song while streaming.
View 1 Replies
May 10, 2011
I'm trying to build a system that live-streams video and audio captured by android phones. Video and auido are captured on the android side using MediaRecorder, and then pushed directly to a server written in python. Clients should access this live feed using their browser, so the I implemented the streaming part of the system using flash. Right now both video and audio content appear on the client side, but the problem is that they are out of sync. I'm sure this is caused by wrong timestamp values in flash (currently I increment ts by 60ms for a frame of video, but clearly this value should be variable).
The audio is encoded into amr on the android phone, so I know exactly each frame of amr is 20ms. However, this is not the case with video, which is encoded into H.264. To synchronized them together, I would have to know exactly how many millisecs each frame of H.264 lasts, so that I can timestamp them later when delivering content using flash. My question is is this kind of information available in NAL units of H.264?
View 1 Replies
May 12, 2009
Got a large file 12 minutes long clip and I compressed it with the adobe optimization program adobe media encoder. I got a 350 megbite file to be 60 megabites as a 320X240. I choose also a medium size video file. How do I keep the video quality and stream it (like hulu would do) or how do I compress it smaller than 60 megabites and keep the same quality. Either or. I am not familiar with web video so I am trying to make the file as small as I can in size with the most amount of quality.
View 3 Replies
Jul 23, 2009
I'm new to the streaming video world but I do have FMS 3.5 up and running and have encoded some wmv and mp4 videos to flv using adobe encoder CS4. I followed the tutorials and have created the swf files in flash CS4 and the videos are streaming as expected.
The primary issue I am having is the videos tend to be choppy at times. They pause, run slowly, audio pops and just overall; glitchy. Typically at the beginning but some times throughout. The test files at the FMS admin page stream fine without issue from the same server. We have tested the site/streams from multiple providers all at cable modem speed or above.
We are running FMS 3.5 developer version and wish to purchase the full version but I really need to fix this issue to prove it's value.As a bit of background we are running/testing FMS 3.5 from a server with the following specs:Redhat EL 4.6-32 SuperMicro X7DBU Intel Xeon QuadCore DualProc Sata [2Proc] Intel Xeon-Harpertown 5420-Quadcore [2.5GHz] OEM 4GB ECC FB-DIMM DDR2 Mainboard Onboard SATAII Controller (2) Western Digital WD Caviar RE 16 WD2500YS Uplink speed 10 (Mbps) Bandwidth allotment 2000 GB(Virtual Private Rack)
View 2 Replies
Sep 22, 2011
I know Flash can capture webcam and record the video to FMS.Can I publish a streaming video to FMS ?
I mean, I am streaming a video with netstream and I want record to FMS the output of that video.
View 3 Replies
Apr 18, 2010
I have a "Play video" button that does exactly that, it loads a flv video and plays it - I can stop, pause and play the video. Now, I want to add a streaming bar.
View 2 Replies
Jun 18, 2009
I'm trying to decide whether, for my particular application, I would be better off delivering video via streaming or progressive download. Here's the situation: Background: this will be a learning drill for learning foreign language phrases. There will be a series of ten short video clips, each one a headshot of a native speaker, saying a single sentence. The background is static so the only thing changing will be facial expressions, so compression should be pretty effective. Each clip will be approximately 4-6 seconds total length. Resolution will be approximately 360 X 270.
The way this particular drill works makes me wonder if perhaps progressive downloading might make more sense than streaming. But like I said, I'm not a Flash developer, so I could easily be wrong. (Did I mention we're currently looking for a talented, reliable Flash developer?) So here's how it will work: Drill will load up showing written text of instructions, along with audio of the narrator reading the instructions aloud. Approximate length of the audio instructions will be 15 seconds. (I"m thinking progressive download could begin during the reading of the instructions.)
After the instructions have been read, the intructional text goes away and is replaced with (from top to bottom) the text for the first sentence, the video box with a static image of the first frame, a "Begin" button. When the user clicks the "Begin" button, the video begins to play, and the "Begin" button transforms into a "Repeat" button, which is inactive while the video plays. When the video ends, the "Repeat" button becomes active. Clicking the "Repeat Button" causes the same video clip to play a second time (again, the "Repeat" button is inactive while video plays.
View 1 Replies
Feb 9, 2010
I am trying to stream an FLV file into a Video object by attaching a netStream using attachNetStream(). This works fine for local files as well as downloading files from a different domain; however, I am trying to download an FLV from php file that sends these headers:
Content-Type: video/x-flv Content-Disposition: attachment; filename="video.flv"
The netStream object responds as though there is no problem, outputting:
NetStream.Play.StartNetStream.Buffer.FullNetStream.Buffer.FlushNetStream.Play.StopNetStream.Buffer.Empty
But The video does not play on the Video object. If I download the video from that php link and save it locally, then have the netStream load it from there, it works just fine.
Why is this happening? I was trying to use URLStream as a way around this, but I couldn't figure out a way to attach a URLStream to a Video.
View 3 Replies
Mar 2, 2010
How i can use IP Camera with FMS for live video streaming.
View 2 Replies
Aug 24, 2010
I have a problem with an embedded flash video not playing to the end, it stops around half way It is a 4 minute video with sound, the FLV file is around 24Mo This is a normal server not a flash streaming server .
I have at least 10 other sites on line with a flash video on the home page and they all work fine.on the same server.only difference is that this file is about 10 Mo bigger on average.
I contacted the company where my server is hosted and they say that it looks like a java script problem but I am using flash 8 pro standard <object> no java script to detect version etc.[code]...
View 1 Replies
Jan 21, 2010
I have a simple flash video player that streams the video from a streaming media server. The stream plays fine and I have no problems with playing the video and doing simple functions. However, my problem is that on a mouse over of the video, I have the controls come up and when I do a seek or scrub on the video, I get little weird boxes that show over the video - like little pockets - of the video playing super fast (you can basically see it seeking) until it gets to the point it needs to be at and then these little boxes disappear.
View 2 Replies
Mar 22, 2010
Is there any way to do dynamic video streaming in flash without using Flash Media Server (FMS) 3.5 as it's a very expensive software but using some open-source software or in any other way.
View 1 Replies
Apr 12, 2011
Is it possible to use the VideoPlayer or VideoDisplay components in Flex 4 to stream a video from YouTube rather than just use the custom YouTube player? How? I want to serve a video inside a banner.
View 1 Replies
Apr 18, 2011
Its been two years since I built a video player and back then Flash was the only choice (just about). My question is if I want to stream a .h24 video over the web that is cross browser and platform compatible, has anything the ubiquity of Flash? How about Flowplayer?
View 2 Replies
