Flash :: Netstream Play In The Middle Of A Video?
Jan 19, 2010
I'm using the netstream and video object to play a video in flash. Specifically a mp4 video.
What I'm trying to do is start playing the file from a specific position (Ex. 20seconds).
However with netstreamObject.seek(20) doesn't work unless the stream has been loaded past 20seconds. Is there a way to specify starting to load at 20s? Or any other way of accomplishing this?
View 5 Replies
Similar Posts:
Jan 19, 2011
I have 3D videos encoded with each eye's content side-by-side on each frame. What I want to do is take the left-half and over-lay it on the right-half. (I'll then change with the colors and the overlaying so that someone with blue-cyan 3D glasses can view the video).
I tried to attach a single NetStream to two video objects and offset them, but that only let the stream play on one object.
View 2 Replies
Aug 21, 2009
I have a .mov file and I want to simply encode the video (i assume with flash media encoder) to be a flash file which loops continuiously with a Play/stop button. I'll then have this movie playing on my html page.
View 1 Replies
Jul 18, 2011
The stop button plays as expected. The play/pause button plays as expected. The issue is when you press pause which will cause the play button to appear, then press stop. the video automatically plays and it shouldn't. I have bolded the control button script for convenience.
[Code]...
View 1 Replies
Mar 25, 2011
Video broadcast using VLC to flv file. I am using the NetConnection, NetStream and Video to play it in a flash. In Chrome and IE everything works fine, but in Firefox and Opera NetStream often dispatch event NET_STATUS with info.code = NetStream.Buffer.Flush and NetStream.Play.Stop and video is a slowdown.
View 1 Replies
Jun 1, 2010
I'm using OSMF v.95 to handle my video playback. When my streaming videos finish, the following error is triggered:"NetStream.Play.StreamNotFound"I want to be able to re-play the videoor scrub back, but the stream is unusable after that error.I've tested against a few different streams - here is one:
View 1 Replies
Feb 14, 2011
I'm making a working scrubber on a video, but having problems. The scrub itself it starting out in the middle of the loadbar. I've looked everywhere, trying to find out what is wrong with it.
[Code]...
View 4 Replies
Jan 7, 2010
I am using NetStream, NetConnection and Video object to play an mp4 file which is hosted over a web server using http.This is an AIR application and the relevant code is pasted below:
var url:String = <some http url>;
connect_nc = new NetConnection();
connect_nc.connect(null);
[code]........
View 0 Replies
Mar 2, 2011
I used NetStream.play("invalid-live-stream-url") to play an invalid live stream. The other arguments are using default, e.g. start = -2, len = -1.
The menu says that when we use the default "start" and "len" to call "NetStream.play", "Plays the live stream until it is no longer available. If a live stream of the specified name is not found, Flash Player plays a recorded stream until it ends."
However, I do not have a recorded stream on the server that has the same name as the live stream, and I did not get the expected "NetStream.Play.StreamNotFound" error.
View 1 Replies
Nov 5, 2010
I got a bunch of live stream from FMLE, say: "FMLE_channel1", "FMLE_channel2", "FMLE_channel3". And then on the server side, I created several corresponding republished stream called "channel1", "channel2", "channel3".
On periodical basis, we call Stream.get("channel1").play("FMLE_channel1", -1, 10, true) every 10 seconds. Similar things were done on the second channel & third channel.Soon after the above Stream.get("channel1").play() call, I should get the following events in sequence:info :NetStream.Unpublish.Successinfo :NetStream.Publish.Startinfo :NetStream.Play.Resetinfo :NetStream.Play.Start In the above case all are happy. Clients can view channel1, channel2, channel3 well.But then after a while, one of the three channels, in most case it would be channel1, will not be viewable.
With the server trace info, I found that after the Stream.get("channel1").play() call, only the following two events exists:
info :NetStream.Unpublish.Successinfo :NetStream.Publish.Starti.e. I was missing the play.reset and play.start event.I further checked and confirmed that the FMLE was publishing all three channels fine to the server. I was able to view the "FMLE_channel1" from flash clients, but not the republished "channel1". the version is FMS 3.5.0.
View 3 Replies
Oct 16, 2011
Is it possible to have a same Video object ( and perhaps StageVideo) connected to multiple NetStream's objects? It's videoconferencing app, in which all members can speak ( So multiple audio sources) but should not hear themselves (that's why I don't join them in a single stream).
That's what I tried:
ns = new NetStream(nc);
ns.addEventListener(AsyncErrorEvent.ASYNC_ERROR, asyncErrorHandler);
ns.client = this;
ns.play(streamName1);
ns2 = new NetStream(nc);
[Code]...
View 1 Replies
Apr 17, 2007
Im a beginner at flash video, and have been using the built in FLV component which I can apply actionscript fades to easily. However I don't seem to be able to use them when I use the better method... NetStream. Here is an example fade:
[Code]...
View 1 Replies
Jan 11, 2010
I have created a FLV video player using the AS3 flash.media.Video object (not the FLV playback component) and I am trying to listen for meta events and Cue Points embedded in the FLV video but I am not receiving any when I trace the movie. The cue points are not being created dynamically, they are in the FLV video.
Video embed code:
// Initialize net stream
nc = new NetConnection();
nc.connect (null); // Not using a media server.
[Code]....
Is there anything I am missing have wrong to capture events from my net stream?
View 2 Replies
Oct 27, 2010
I'm trying to attach a single NetStream Object to two separate Video objects instead of pulling redundant streams from the server. The expected behavior would be for both Video's to display the same content. However, it seems that the last video I attach the NetStream to is the only Video that will display the content.Has anyone else run into this? I'd rather not go to the inelegant steps of using BitmapData to clone pixels if I don't have to.
View 2 Replies
Apr 27, 2009
I am unable to play the mp3 from the middle
[Code]...
View 1 Replies
Mar 23, 2010
I have a "movie player" that plays flv files using the code below (videoToPlay is the name of the file to play and is just a string). I want to use the same setup to play an mp3 file also.I tried using mySound = new Sound(); and then mySound.attachNetStream(ns);, but it gives me this error: 1061: Call to a possibly undefined method attachNetStream through a reference with static type flash.media:Sound.
View 5 Replies
Nov 4, 2010
1) What is the recommended/best practice method for loading videos (flv, f4v, mp4, etc.) from a play list. Some of the files might be on the local file system, some might be on a streaming server and uses rtmp.
2) Does the VideoPlayer.play internally use NetStream/NetConnection objects? I could get the files to play using both these methods - not sure if one is better than the other. I didn't see any references about streaming in the VideoPlayer.play method - but it does work with rtmp URLs!
3) For a long running standalone application, how do I make sure the VideoPlayer/NetStream objects are properly released/garbage collected? Right now I am closing the netstream/netconnection after playing every file - mainly because I do not know which server/file system the next video is being loaded from.
View 6 Replies
Nov 22, 2011
I have a Net Stream object that I am using to stream video from an Amazon Flash Media Streaming service.The video makes a connection and plays fine but randomly it seems to just freeze and the only way to get it to work again is to re-establish the connection. I have tried to put other videos in that amazon bucket as well and they seem to play fine. this happens when it is in .FLV form and .mp4 format.
I have set the buffer time to be 5 seconds and i watch the output of the buffer to see the % of full it is. when the problem occurs the buffer 5 goes from 100 to 0 and then it throws a Buffer fail error (i'm using OVP framework).I have come to the conclusion that it is either a video encoding problem or perhaps there is a firewall issue that blocks the data from getting through.
View 1 Replies
Dec 26, 2010
I notice that, when I pause the video, the event "NetStream.Buffer.Flush" is triggered. And according to the language reference: "Data has finished streaming, and the remaining buffer will be emptied.", I have to re-buffer it, right? However, also according to the reference, it shouldn't stop buffering:
Starting with Flash Player 9.0.115.0, Flash Player no longer clears the buffer when NetStream.pause() is called. This behavior is called "smart pause". Before Flash Player 9.0.115.0, Flash Player waited for the buffer to fill up before resuming playback, which often caused a delay.
I'm using Flash Professional to do the debugging, and the traced version number is: MAC 10,0,22,91, and it appears for both FMS4 and red5.
View 1 Replies
Feb 3, 2012
I have a video which my client wants me to cut in pieces. I see that I can set up starting and ending points in Media Encoder, i.e. cut out the part from beginning and end. Is there an option to cut out parts in the middle?
I am familiar with After Effects but my client doesn't want to invest in this program. Are there any smaller/cheaper programs which allow more video editing that AME if AME indeed can not do it?
View 1 Replies
Dec 30, 2010
How many instances of Video, NetStream and NetConnection would be needed for multiple videos? Not sure that's the right question but essentially here's the objective:
Currently, I'm working on an interactive product tour, parts of which are to consist of short video clips, each covering a feature. While only one such clip will be playing at any given time, I'd like put them all at the application's fingertips as part of the initial preloading process before launching into it. The idea is to provide a seamless instant-play user experience without hitting the breaks before individual segments.
[Code]....
View 2 Replies
Jul 6, 2011
I'm making a small video players in AS3, and I've found that after calling NetStream.pause() or NetStream.togglePause(), no status messages are being fired any more.If I click the "pause" button while the video is buffering, I never get the Buffer.Full message.Here is some code:
_connection = new NetConnection();
_connection.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
_connection.connect(null);[code].....
View 1 Replies
Apr 2, 2011
i want to know if it is possible to play a video via flash player, when the video is located on different server's mysql. for example: i want to play video on [URL] which(video) is located in [URL] mysql
View 1 Replies
Jan 18, 2010
I was wondering how I can delay (2 seconds) a video to play in a Flash Video Player? I know one way is for me to add blank frames but I would like to know some other options.
View 2 Replies
Dec 7, 2009
I have created my first flash video and wish to allow the visitors to play the movie themselves instead of having the movie play automatically also have a stop or pause button too.
View 2 Replies
Jun 10, 2011
I want to play smooth streaming video from IIS using the flash video player like e.g. jw flash player instead of silverlight player?Which video format should I use in this case? Can flash then play e.g a video via smooth streming encoded with microsoft encoder?Do you know some alternative video players, that combines flash and silverlight functionality (selected per java script) to use with flash and silverlight?
View 1 Replies
Oct 13, 2010
I'm just trying to figure out this error message that comes up when I am importing a video into flash. It says: 'NetStream.Play.StreamNotFound: Adobe flash tried to play a live or recorded stream that does not exist. Source can't be found'
View 2 Replies
Apr 18, 2011
I need to play preview video first, before starts play any other video. I am using jw player
View 1 Replies
May 12, 2009
I want to play FLV video in a flash video player, and at the end of the buffering I want to access the data (video data, or buffered file) so I can manipulate it. For exemple in a ByteArray format so I can save it to local disk... With the NetStream and NetConnection I can play the video without problem, but I can't find a way to access the data. using the URLStream, I can download the video file [URL], and I can access the data I want but I can't play it?
Is there a way to play the URLStream, or to get data from the NetStream?
Or may be, I can access the cache of the browser to get the bufferd data played by NetStream?
View 6 Replies
Aug 24, 2009
The main problem is that the FLV doesn't load/play, which most likely causes the secondary problems, such as the bufferClip always visible and no way to test the video and audio scrubbers.
[Code].....
View 5 Replies