I have a Native Window in Flex AIR. Let's say the window doesn't have a focus. It is inactive. Is it possible to find out when mouse is over such window? The window is always in front. I heard that it is possible by checking stage.mouseX in ENTER FRAME handler.
View 2 RepliesI often want to run a movie but are only insterested in the debugging output and switch back to my code or to the debugger.I discovered, that the movie framerate is significantly slower in an inactive browser window. This causes e.g. certain async unit tests to fail when run in the Flex UI. So it's not that trivial
View 1 RepliesIn my Flex (Flash Builder 4) Air application, I have a spark window and have set the close="" event handler (also tried the 'closing' event) to a method that pops up an alert confirming if they want to close the window. This worked fine in my normal browser based app as a TitleWindow, but now that it's an Air app with a native spark window, it's not working. I never see the alert dialog, and if I debug trace, it does in fact go in to my close handler method, but visually I can see the window is already gone from the screen. In an AIR application, how do you add a confirmation dialog for when they click the "x" to close the window?
View 1 RepliesHow do I open a new window as hidden? (note the visible="false")
<s:Window xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
showStatusBar="false"
resizable="false"
visible="false">
If I declare a window this way, and then call this.open(false);, the window will quickly open and then hide, and then be reshown when I actually display it, I want to do this to be able to load content and fit the window to that size before showing it.
I have a Adobe Air app (AS3, not Flex) that has 2 windows. When I click away from them onto another desktop program, I get an "Deactivate" Event (as you would expect).When I click on say Window#1 I get an "Activate" Event (as you would expect).But when I go from Window#1 to Window#2, I get nothing. And I believe this is because the Air application is still the active program, Just a Different Window.
But I have the need to know when I go from 1 window to another.The horrible solutions I have come up with so far is to have an onEnterFrame and check if the current window is the active window. But I would much prefer to do it a much better way that such a hack.I have gone though Stage, NativeApplication and Native Window Events and none of them do what I need. Can anyone point me to another Event I may have overlooked?
how do i create ascripted rollover blur tween for all inactive buttons??
i got this script: "ziel_mc" is the button blurring on rollover. it works!!! but how do i add more than this one mc?? z.b. ziel_mc1, ziel_mc2, etc.
is there any way to add more mcs, separated by commas or anyhow??
Code:
stop()
import flash.filters.BlurFilter;
import mx.transitions.Tween;
import mx.transitions.easing.*;
[Code].....
how to keep items below my pop-up window (window-component) from remaining active even though my pop-up window is layered above my buttons. I've tried to program my buttons to be inactive but since my buttons are part of an intricate animated navigation system, it seems like a lot of work when there should be an easier fix.
View 7 RepliesWith selenium I'm currently automating tests for a website having flash elements for user inputs. While everything works fine when executing these tests on my computer locally, it fails to load the embeded flash if I start selenium on a remote Windows XP machine.
However, the flash just loads fine if I start the tests while I'm logged in via remote desktop.
This leads me to the assumption that whithout any desktop environment loaded or user logged in the firefox window is treated just as though it was minimized or the current tab was inactive, which I know prevents flash from loading until that window/tab is activated.if there is a way to enable firefox to load flash even if it's not currently displayed in an active window?
I am an artist trying to remake my website...I have a picture of a window on my homepage. The window is a movie. When clicked on, the window lights turn on and a grid of thumbnail pics appear. Each thumbnail is a movie clip. When a thumbnail is clicked on, the movie plays and a larger image appears over the window. The problem is, the window is still active underneath the large image, so if I click on the large image, I am really clicking on the window movie clip underneath, and the thumbnail grid disappears-starting the window movie clip over. How do I make the window clip inactive after it is initially clicked? Also, I would like the larger images to end their movie clips after another thumbnail is clicked, so that there aren't large images piled up on top of each other.
View 6 RepliesI'm developing a multi monitor fullscreen application with Adobe Air 2.6. I can create a window for every monitor, and put those windows to fullscreen.
theWindow.stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
The problem comes when interacting with those windows. If I click the window on the main monitor (the one with the dock and menu bar) no problem, but when I click any other window the system menu bar becomes visible. I've tried resizing the main window to match the monitor size and moving it to a negative coordinate but it always stays behind the bar. Is it possible to do this in Air?
I'm trying to add an event listener to a window that pops up (to the whole window) that will close that window when clicked on. Basically it's your typical about window that would be found in any program by hitting help, then about this program. I am using no chrome on it so I'd like to just be able to click it and have it close.
On a less important note I'd like to center the window on the stage when it pops up. Right now I'm just using the x and w properties to get it close to center on my monitor but obviously that won't work for everyone. Below is the code I've tried. No luck whatsoever. Window pops up but stays up if I click it. Any help as always would be AMAZING!
[Code]...
How do I load an external swf into an external window? I'm using the following code, it works if i add the swf to the original window's stage but not if i add it to the new window's stage.
[Code]...
I used the following code to create a new window using ActionScript 3 with AIR 2.6, but I am unsure of how to put anything in the window.
ActionScript Code:
import flash.display.NativeWindow;
import flash.display.NativeWindowInitOptions;
[code].....
I am having trouble with a job I am doing at the moment which has an mc with buttons within it. I want it so that when I roll over the mc it tweens from a small version to a larger version, and on this mc there are some buttons. At the moment I can get the mc to move but the buttons remain inactive and also the rollover states on the buttons don't work. I have attached a simpler version of what I am trying to do to this post.
View 3 Repliesmy application launches with the stage size of 1000 x 500, 2:1 aspect ratio. the native window has system chrome, which will always be a little taller by a few pixels.how is it possible to only permit a native window to resize proportionately in order to always maintain the 2:1 aspect ratio of the stage?[code]
View 1 RepliesI'd like to create a window witch is not allow to move. Is it possible.
View 3 RepliesI have 2 swfs loaded that use a local connection to communicate, they work fine when loaded on the same window but when I load them on separate windows it gives me the following error.
ActionScript Code:
Main Thread (Suspended: SecurityError: Error #2070: Security sandbox violation: caller file:///C:%5CUsers%5CSiggy2xc%5CAdobe%20Flash%20Builder%204.5%5CMass%20Media%20CG%5Cbin-debug%5Cswf%5Canimation%5CTest.swfcontrol cannot access Stage owned by app:/Mass_Media_CG.swf.)
I am developing an Adobe AIR application which uses both native windows and floating panels. Is is possible to enable the creation of a floating window instead of a native window when a JavaScript window.open() function is called?
It is required that all of the floating windows are contained within one native window, therefore the creation of more native windows is not suitable.
I have used a Custom HTMLHost class in order to enable the creation of a native window but I can't work out a way of creating a MDI window instead. I am using the flexMDI framework for my floating panel interface.
I have a Flex AIR2 application which uses native process to run CMD.exe. Application running fine on WinXP, Win R 2008 server. But not running on VISTA 64 bit OS. Flex not able to run CMD.exe when application installed in C:Program Files (x86). When I run application as Administrator mode it is working fine. Below is my code, I want to start cmd.exe as Administrator.
[Code]...
I admit to being in WAY over my head here, but it seems like there should be an easy fix (yeah, right!) Here is my URL: [URL] I used AS3 to create my buttons, but when I click on them they open up new tabs or windows and I want then to just stay in the same tab. I got this AS for the buttons from a Flash workshop I took over the summer and I've tried a couple things I found online to change the target for the buttons, but I just got a bunch of errors. So now I'm kind of "afraid" of my AS
View 2 RepliesI have a big image (1600x1200) Which obviously doesn't fit in the window. How can i have it so when i hover the mouse the image moves. Basically a Yugop scrolling effect but in all directions
View 3 RepliesI have tried the options given on Adobe Livedocs : adt -package -target native myApp.exe myApp.air, but I keep getting the message "-storetype required". I then try with adt -package -target native -storetype pkcs12 -keystore myCert.pfx myApp.exe myApp.air and get the same message. I have already created the .air file and the .p12 cert file in flexbuilder, and am just pointing to these in the command prompt in the specified places, but the same problem occurs. Any ideas?
View 1 RepliesHas anyone found a way to get a Native Extension running for Admob yet? Or for iAd for that matter?
There seem to be a number of issues with the ANE, with compiling and with the manifest. Has anyone found a way to have it all sorted?
I have a big problem with my flash menu and the hittest function.I want to show a 'popup' window on menu item rollover (and i did it!).But I have a rollover problem passing through other items because of hittest areas are colliding.I attach a .fla file for example...Try to pass from 'voice1' to 'voice 2'...voice 1 windows remain shown.
View 5 RepliesIn AIR on Mac, when I send login creds to a service and they're incorrect, AIR displays a native popup window to try logging in again without dispatching an error event. Twitter provides a header (suppress_response_codes=true), which returns any error as a status 200 with the error message. I'm using HTTPService to connect to a service without a header like this. Are there any properties or headers I can send to avoid this popup?
View 3 RepliesIt could run a native process in an adobe air application by enable extendedDesktop.
But if create an flex library, does it support running an native process. If yes, how to configure it?
How can i create native installer for windows, MAC and linux, which will check the system if air runtime is not install in the user system then installer will 1st install the AIR runtime and then the AIR application.
Do we need to use any third party software to achicve this?
For checking system wether the AIR runtime is install or not Do we need to write custom script or installer will automatically get things done.
I have the below Json (wf.json)
{
"workflow":{
"template":"Analysis1",
[code]......
what i am trying to achieve is have a rollover on a button that pops up a 'window' with some text on it (i have this bit worked out) then once the user has finished reading the text they rollout from the 'window' and the image behind is restored. i have attached the .fla so you can see what i mean.
what is going wrong is that the active part of the rollover on the button is only very small and as the 'window' expands and then reveals the text, the active part of the button remains small. so when the user moves his or her mouse the 'window' disappears. i'd like it to stay open until they rollout from the entire text window.
In adobe air, is there anyway to get OS open a file, in their native applications?
View 3 Replies