How do I load an external swf into an external window? I'm using the following code, it works if i add the swf to the original window's stage but not if i add it to the new window's stage.
[Code]...
I have a Adobe Air app (AS3, not Flex) that has 2 windows. When I click away from them onto another desktop program, I get an "Deactivate" Event (as you would expect).When I click on say Window#1 I get an "Activate" Event (as you would expect).But when I go from Window#1 to Window#2, I get nothing. And I believe this is because the Air application is still the active program, Just a Different Window.
But I have the need to know when I go from 1 window to another.The horrible solutions I have come up with so far is to have an onEnterFrame and check if the current window is the active window. But I would much prefer to do it a much better way that such a hack.I have gone though Stage, NativeApplication and Native Window Events and none of them do what I need. Can anyone point me to another Event I may have overlooked?
I'm developing a multi monitor fullscreen application with Adobe Air 2.6. I can create a window for every monitor, and put those windows to fullscreen.
theWindow.stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
The problem comes when interacting with those windows. If I click the window on the main monitor (the one with the dock and menu bar) no problem, but when I click any other window the system menu bar becomes visible. I've tried resizing the main window to match the monitor size and moving it to a negative coordinate but it always stays behind the bar. Is it possible to do this in Air?
I'm trying to add an event listener to a window that pops up (to the whole window) that will close that window when clicked on. Basically it's your typical about window that would be found in any program by hitting help, then about this program. I am using no chrome on it so I'd like to just be able to click it and have it close.
On a less important note I'd like to center the window on the stage when it pops up. Right now I'm just using the x and w properties to get it close to center on my monitor but obviously that won't work for everyone. Below is the code I've tried. No luck whatsoever. Window pops up but stays up if I click it. Any help as always would be AMAZING!
[Code]...
I used the following code to create a new window using ActionScript 3 with AIR 2.6, but I am unsure of how to put anything in the window.
ActionScript Code:
import flash.display.NativeWindow;
import flash.display.NativeWindowInitOptions;
[code].....
my application launches with the stage size of 1000 x 500, 2:1 aspect ratio. the native window has system chrome, which will always be a little taller by a few pixels.how is it possible to only permit a native window to resize proportionately in order to always maintain the 2:1 aspect ratio of the stage?[code]
View 1 RepliesI have a Native Window in Flex AIR. Let's say the window doesn't have a focus. It is inactive. Is it possible to find out when mouse is over such window? The window is always in front. I heard that it is possible by checking stage.mouseX in ENTER FRAME handler.
View 2 RepliesI'd like to create a window witch is not allow to move. Is it possible.
View 3 RepliesIn my Flex (Flash Builder 4) Air application, I have a spark window and have set the close="" event handler (also tried the 'closing' event) to a method that pops up an alert confirming if they want to close the window. This worked fine in my normal browser based app as a TitleWindow, but now that it's an Air app with a native spark window, it's not working. I never see the alert dialog, and if I debug trace, it does in fact go in to my close handler method, but visually I can see the window is already gone from the screen. In an AIR application, how do you add a confirmation dialog for when they click the "x" to close the window?
View 1 RepliesI have 2 swfs loaded that use a local connection to communicate, they work fine when loaded on the same window but when I load them on separate windows it gives me the following error.
ActionScript Code:
Main Thread (Suspended: SecurityError: Error #2070: Security sandbox violation: caller file:///C:%5CUsers%5CSiggy2xc%5CAdobe%20Flash%20Builder%204.5%5CMass%20Media%20CG%5Cbin-debug%5Cswf%5Canimation%5CTest.swfcontrol cannot access Stage owned by app:/Mass_Media_CG.swf.)
How do I open a new window as hidden? (note the visible="false")
<s:Window xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
showStatusBar="false"
resizable="false"
visible="false">
If I declare a window this way, and then call this.open(false);, the window will quickly open and then hide, and then be reshown when I actually display it, I want to do this to be able to load content and fit the window to that size before showing it.
I am developing an Adobe AIR application which uses both native windows and floating panels. Is is possible to enable the creation of a floating window instead of a native window when a JavaScript window.open() function is called?
It is required that all of the floating windows are contained within one native window, therefore the creation of more native windows is not suitable.
I have used a Custom HTMLHost class in order to enable the creation of a native window but I can't work out a way of creating a MDI window instead. I am using the flexMDI framework for my floating panel interface.
I'm using the following code to try to open a new window and load an swf onto it. The window opens and it says the swf is being loaded, but I see nothing. If you remove "newWin." From the very last line it loads the swf properly on the 1st window. The only object on the stage is a button with the instance name "test_btn".
ActionScript Code:
import flash.display.NativeWindow;
import flash.display.NativeWindowInitOptions;
import flash.display.MovieClip;
[Code]....
i am trying to load a swf in a little rectangle and not the whole window.
View 3 RepliesI want a textfile to load a site in a new window:
Code:
<a href="http://www.site.nl", "_blank" >www.site.nl
but this doesn't work..
I've got a few .swf files with video tutorials I've created using Captivate 4.I wanted to link them so I've created a main screen with menu with buttons in Flash.I've added AS to load the external swf files but they load in the same window. How can I load these .swf files in seperate window so that you could get back to the main window after you've finished watching?[code]...
View 8 RepliesI found two tutorials that both contain pieces of what i am looking for but i cant seem to figure them out and get exactly what i want. Here is the first one[url]...
In the first one, the general idea is what i am looking for. Except that i want to load a movieclip and not an image. My problem in this one is the button component that is used. I have no clue how to skin or customize the button, and i cant find a good tutorial to help me so i figured it might be easier to just change the actionscript for this. I want to be able to create my own button (instance button) and use that so that when people release that button, the movie clip pops up![url]...
I'm trying to load a local SWF Application in my Air Application via the SWFLoader class. The SWFLoader class is displayed in a new Window. Therefore, i'm trying to resize the window automatically, when the Flash Application is resizing. But here's the problem. The SWFLoader does not get any events when the loader App has been resized.
The Problem seems to be the Sandbox Restrictions. I'm able to call methods in the childSandboxBridge and parentSandboxBridge Objects that i've set in the LoaderInfo of the SWFLoaders content (the loaded SWF Application). But i cannot listen to any ResizeEvents or something like that when i'm resizing the loaded App.
I want to load external .exe or .swf in new flash window.I do not want to open it in an internet window.I want to open an .exe and click on a button that will open another .exe or .swf.I want to keep both flash windows open.I want to have the new one on top of the first one and I want it full screen.I am using Flash CS4 Action Script 2.0.I am using this code for full screen of second .exe or .swf
fscommand("fullscreen","true");
I am using this code to close the second .exe or .swf
on (release) {
fscommand("quit", "true"); }
I am wondering what the AS code is to get a URL link in flash AS2 to open up into the new window that it already opened up the first time. Basically, I am making an online store. Once you hit the "Add to cart" Button, it opens the shopping cart up into a new window. ("_blank") Which I want it to. But now, when the shopper comes back to the window with the store in it and adds another Item to their cart, they now have 2 shopping carts open. I want it to refresh the shopping cart window that was opened the first time with the updated information, instead of opening an additional one everytime something new is added to the cart.
View 3 RepliesI am trying to set it up so that when someone goes to a page on this site, it plays the audio MP3 and then when that MP3 is completed, refreshes the current browser window with the new page. What I have so far in Actionscript 3 is that it works, but loads new page in a new browser window while the MP3 is still playing.Here is the code I have so far, all in a single KeyFrame.
Code:
var url:String = "url2file/preroll.mp3";
var urlRequest2:URLRequest = new URLRequest(url);
[code]........
i have a m.c. button that when released i want it to load a movie but, i want the movie to open in a new window!so here is my script now:
b1.onRelease = tutorial;
function tutorial () {
_root.contents.loadMovie("tutorial_1.swf");
}
I have a script that is a flash based scroller that takes the information from an xml file:There are scrolling thumbnails, when you click on them it takes you to a new url page. Only it's loading the url in the same window and I'd like for it to load in a blank or new window.Here's what I have now:
Script from FLASH:
filename_list = new Array();
url_list = new Array();
title_list = new Array();
[code]...
Ok i have a dragable window that i want text to be loaded into from a .txt. I used loadvariable and when i click my button and the window pops up no text. the close button on the window works, and i can drag it but no text. i tried pulling the text window and all its code out of the Window symbol but then the text didnt follow the window.
View 1 RepliesSo basically i have a flash application that needs to call a url when a button is clicked, but i don't want it to actually load a new window or even load the url. All the button does is call the url and it logs it, kind of like a click tag. My server keeps track of the number of times the particular url is called.
Everything works fine, but everytime i do it, it opens up a new browser window that is empty, i do not want to open a new window. I am using getURL, but that actually opens a new page, is there any other way to do this?
I have this script on an invisible button on a banner ad, but the client doesn't want the linked page to open in a new window, but rather load over the page in same window. How can I change the script to accomplish this,
link_btn.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);
function mouseDownHandler(event:MouseEvent):void {
navigateToURL(new URLRequest("http://www.sdesignsstore.com/store.html"));
[code]........
I have developed a full screen .exe flash file in actionscript 2. It controls physical lights (e.g. turn on and off) by simply calling a URL for each action. However, I don't want the called URL's to open in front of the interface. Is there a way to call a hidden URL in flash?
View 3 RepliesI've created a standalone Kiosk that sends data input from the user to an ASP page.
Everything is working perfectly except that since this is a Kiosk, there is no need for browsers. When I send the info to the ASP page, it pops up a new browser window.
Here is my code:
--------------------------------
on(release){
v = new LoadVars();
v.send("http://www.cube-interactive.com/clients/healthsource
[Code]....
So basically i have a flash application that needs to call a url when a button is clicked, but i don't want it to actually load a new window or even load the url. All the button does is call the url and it logs it, kind of like a click tag. My server keeps track of the number of times the particular url is called.Everything works fine, but everytime i do it, it opens up a new browser window that is empty, i do not want to open a new window. I am using getURL, but that actually opens a new page,
View 6 RepliesMy code doesn't work.I use flash 8 (AS 2.0). When I click a button, I want it to load another flash file but not into the same parent/web page. I need the file to load in it's own window.
on (release) {
loadMovie("MyAccountPage.swf", "_blank");
}
After this, I still do not get a respond when I test run the script.