Based on this guide, I have enabled debug level logging and also enabled date, time, level and category logging.
This works great, except now I am seeing all my data that's returned being logged. Is there a way to disable this? I would still like to see the calls logged. I've tried info level, but that turns off request logging.
I have a set of users who run my application in non debug mode. Off late they have been reporting lot of issues. But I am not able to debug as there is no log file.Is it possuible in flex 3 to do logging in a file without running in debug version. I understand trace only works if we run application in debug version.
View 1 RepliesI was wondering what people are using for externally configuring logging in a Flex app. Are there any ready baked solutions out there, similar to Log4J's configuration via properties files for instance?
View 1 RepliesIs it possible to trace every single method call in flex/actionscript by injecting logging statements some way? Like how it's possible in C# using PostSharp.
View 1 Repliesi'm looking for a possibility to log messages in my flex 4.5 Project. This should cover errormessages in remoteClasses, errorHandler or messages typing by hand. After reading a lot of webpages, the solution from parslay looks good. i want to switch to this framework anyway. the benefit is the possibility to configure the logging behavior at runtime. but i don't understand the documentation. perhaps because I'm brandnew in parsley. Also google has no fitting result.
[Code]...
I am trying to write a custom logger target by extending TraceTarget and overriding the mx_internal function internalLog. I would like to send the occasional error log to our server for recording. I am doing this using an HTTPService, and sending it each time internalLog() is called.
However, if one does the following,
logTarget = new StandardLogTarget();
logTarget.filters=["*"];
[code]......
I am using FlexUnit4 with FlashBuilder4. A lot of the classes that I'm unit testing make use of the Flash Logger.In the main app, we use TraceTarget so that the logging shows up in the trace window, which greatly aids in debugging:[code]I'd like to do the same thing for the unit test runner that FlashBuilder generates (FlexUnitApplication.mxml), but I'm not sure how to go about it. I could, of course, add TraceTarget to FlexUnit Application. mxml, but as the warning at the top of the file says,My question is: how do I get logging-to-trace to work with FlashBuilder and FlexUnit?
View 1 Repliesi need to connect to two different domains from a single flex application. the problem is the domain other than the current hosted domain is unable to login. letz say i hosted the application at LOCAL server. im able to login to the local server . From the existing application i need a login to the MAIN server too. The problem comes up here. flash security is not allowing login to MAIN server. in crossdomain we allow-access-from MAIN server. but i want access to the MAIN server from LOCAL server. is ther nything i need to put extra in [URL]?
View 1 RepliesIs it possible to enable verbose build logging in Flash Builder? Ideally, I want to be able to see the exact arguments that are being passed to the mxmlc.exe compiler. Context: I'm currently trying to automate our build process using GradleFx so we can move away from using Flash Builder and run our build on a CI server. At present, I'm running into a few problems and my lack of knowledge about the flash/flex build process is impeding progress. Being able to see what the FB project translates to would greatly aid me in being able to set up the new build scripts.
View 1 Replieswe're developing an application and we need for this and further projects a centralized logging. I know there is a build in log api in flex builder 4.5. And the loger has a log target. All i found is how to send these loginformations to the trace console.But i'm looking for sending the logfiles to my server.Maybe i can send messages to a webservice which fill a database in the backend. I dont'know if this is a recommanded way.How do you store your log informations centralized?
View 2 RepliesI can't seem to get any logging in flashlog.txt. I've read through both articles:
[URL]
My home in XP is H:. So currently I have the flashlog.txt file here: H:Documents and Settings(username)Application DataMacromediaFlash PlayerLogs
mm.cfg is here: H:Documents and Settings(username)
mm.cfg contains:
TraceOutputFileEnable=1
ErrorReportingEnable=1
MaxWarnings=0
As far as I can tell, there are not changes in logging from 3 to 4 -- is this the case?I ask because we change the LOGDIR location, and while our test systems are okay for unknowns, our public systems need to be uniform (plan ahead).
View 2 RepliesI have one particular FLA that is crashing every time I try to compile (after switching to Snow Leopard). Flash just stalls and I am forced to use "Force Quit"... I have no idea what could be causing this and I cannot find any crash report. Where on the system does Flash put crash logs?
View 1 RepliesI know virtually nothing about Flash so I'm kind of casting about in the dark.
I have the misfortune of being a BT customer, and whilst I have reasonable bandwidth (can view streaming high res video fine) I always have problems listening to radio programmes from the BBC. I think it could be buffering due to traffic shaping, or it could be the Flash applet used to play the content, or something else.
Is it possible to bring up some kind of debugging console, or view some kind of error log to see if there is some diagnostic information that could be useful in finding the problem?
Is it possible to log any and all errors in Flash? The debug player definitely has access to the information when a bug is encounted, is there a way to get that info and send it off in the background?
View 7 RepliesIs there a way to retrieve the debug information for all unhandled errors and perhaps output that error to a web script (php etc)? I was looking for a listener which could listen for any error which is thrown. Otherwise how would you ever know what errors happen in the public? People need to be running the debug flash player to see errors. So assume there would be a way to record them also.
View 1 RepliesI want to develop a logging system for my application. This system is intended to log warning,messages(like traces) and errors in a log file in the server with time stamp and user information.I am familliar with flash tracer but that is temporary. Sometime to debug real time user's reports I need this system.
View 1 RepliesI want to develop a logging system for my application. This system is intended to log warning,messages(like traces) and errors in a log file in the server with time stamp and user information.
I am familliar with flash tracer but that is temporary. Sometime to debug real time user's reports I need this system. Some of the files in the application are in AS1 and the rest in AS2.
Is it possible to set up FMS to log uniqe visitors in FMS access log file? I am aware of unique IP and session ID (c-client-id) logging, but these do not represent actual number of viewers. So I was hoping to get something like unique browser ID (a cookie?) which I guess is the closest I can get to the actual number of unique visitors.
If anyone has other ideas, how to log unique visitors or a variable close to unique visitors, If browser cookie is the way to go, can someone tell me how to "forward" this to FMS log file? Also, what software would you recommend for FMS log analysis? Im currently using Sawmill, but Im not completely satisfied, because I cannot see how many people have watched the webstream for how many minutes, therefore the reporting is inaccurate.
I recently setup Flash Media Server on Amazon EC2 and things are going well so far; however the admin console wont login. I've set the username, password, and port in the config file and opened that port, among others, in the security group. I've then restarted both FMS and admin server multiple times.
When I try to login I get no errors. Nothing happens at all. When I open FireBug and/or Fiddler2 to watch the communication, I'm not seeing a single thing happen. Clicking "Login" submits no requests at all. Do I just not understand how FMS works? I would assume some sort of request would need to be made.
I am an intern trying to fix a problem with an XMLsocket outputing the wrong byte size, stored in a byte array, for the file. Anyone know why a XMLsocket would be output the wrong file size/byte size for a file?
View 1 RepliesI have an abstract superclass which has around 300 subclasses. I would like to log when certain methods on this parent are called, and I'd like to know the name of the subclass thats making the call. Is there any way to do this without rewriting all my subclasses to explicitly pass their names upwards to the parent's logging method? E.g., let's say I have a superclass Foo with a method writeLog(str). Foo has a subclass called FooBar, which calls super.writeLog("hello"). Can writelog just inherently figure out that a FooBar called it, without the need to rewrite everything so that we have to call super.writeLog("hello", "FooBar") ???
View 1 RepliesI got the link for the same but this is for Flex. So how can I use this code for flash CS4. What changes are required for flash (fla) file? I import the MyCustomLogger (as per example given) in flash I am confused how to trace the global trace()in flash.
This is the link [URL].
Is flash capable of logging IP addresses and domain names?? If so how do u do it.I know Java can so i asumed flash could too..
View 2 RepliesI've thought about storing the info into mysql, but just realized that if people close the explorer instead of logging out, it still stays the same. Is there a way around this?
View 10 RepliesI have a scrollpane with a very long list of images stacked vertically. The user can scroll around, click on an image, and it will take them to another part of the application. There, there is a back button so they can return to the list of images. Instead of jumping back to the top, I want the back button to return them to where they were in the list of images beforehand. how do I log the value of the scroll position, and then set it to that value when the page is loaded again?
View 3 Repliesis it possible to extend the access.log file? I want to pass user information via the connect method to the application and want to include this data in the access.log file.
View 5 RepliesWe can't login to the Admin Console. After we enter credentials and click login. Error message comes up. "A script in this movie is causing Adobe Flash Player 10 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script? "if we say no, it comes back. If we say yes it aborts script but we never login to admin console.
FMS is running fine, it just seems to be the flash movie that can't open. We have set it up to allow each website we are running to have its own application. since we have 1500+ applications running, we think this might be the issue. Can someone let us know if there is a application limit per server running FMS and/or should we take the 1500 websites and have them all share the same application?
I'm using BlazeDS to remote some Java objects that I'm consuming in a Flex application. I'm getting a type coercion error with one of my classes that I can't for the life of me figure out. I have other classes that are working fine using the same data types, and I've gone over my mapping a dozen times. I'm following all of the necessary conventions for getters and setters as far as I know...
Anyhow, my question is: how can I debug this problem? Running the Flex app in debug mode spits out some generic errors to the console that don't really help much (TypeError: Error #1034: Type Coercion failed: cannot convert Object@5d1d809 to valueObjects.SomeClass.).
This issue is being tracked on the facebook-actionscript-api site here:url...What steps will reproduce the problem? Call FacebookMobile.login( APP_ ID, cbLogin) on an Android tablet.Enter Facebook account credentials and press "Login".What is the expected output? What do you see instead?The login window closes and returns to the screen that launched the login window. The callback function 'cbLogin' is called.The screen goes completely white, and has 'Success' in small black text in the >top left corner of the screen. The callback function 'cbLogin' is never called.What version of the product are you using? On what operating system?
-Android v3.2
-facebook-actionscript-ap v1.7
-ASUS Eee Pad Transformer TF101
I've tested this on 2 Android phones, the HTC Incredible (Android v2.2) and the HTC Thunderbolt (Android v2.2.1), and it works fine on both.