I have a problem..I am binding an array collection to a datagrid in flex. My problem is whenever i try to remove an item from the array collection.. the datagrid does not refresh the values....This is the code that I am using
[Code]....
eventsList is the datagrid that is bounded to showArray(an Array Collection)
I have extended CheckBox class to use it as itemRenderer to centered it in DataGrid cell and reflect ArrayCollection changes. Here is the .as:
package myComponents
{
import flash.display.DisplayObject;
[code]......
I'm working on my first ever AIR application with flashbuilder - just so you know. I've bound a mx:DataGrid component to a DataProvider which is a mx:HTTPService fetching an xml file with items. To keep the data up to data I'm polling the webservice on a given interval.
My problem is that I loose the currently selected item in my DataGrid when the data is updated. I've tried to save the DataGrid.selectedIndex and set when the data is updated, but I'm not sure when to do it?! The closest I've come is to restore the index when the updateComplete event of DataGrid is fired. This works, but the selection first fades away and then fades in - not updated soon enough. So what is the best way to keep the selection? (only one selected item at a time) And as a side question: is there a convenient way to only update the data when it has actually changed?
I'm wondering how to garbage collect a variable in Flex even if there are other objects binded to it.
View 1 RepliesI have a flex application that has a home button. I need to reset the application when this button is clicked. I can't use navigateToURL or ExternalInterface.call("window.location.reload"); as its not acceptable to reload the swf file.
View 5 RepliesI'm having a problem refreshing an xml file. I am bringing it in through an HTTP service component and putting it into a bindable array _cattArr, that I am using as the dataprovider for a grid.When someone adds an item to the datagrid, it saves to the same xml file. Then I close the window, reopen it and don't see the item that has been added.It is writing to the xml file, because when I restart the flex app, the item has been added, it's just not refreshing it. I have tried to resend the httpservice, but still no luck. What is the correct process for doing this?
View 3 RepliesIs there a way to refresh a component or an application back to its initial state? I have an accordion navigator that stays on the most recently selected index even if I log out. Right now, my log out function takes me back to the login page which is at state(1). If I log back in and go into the accordion, it is on the last tab I had viewed.I would like to be able to clear any data from the controls inside the nav and reset the nav back to its default. I thought something like,
public function logout():void{
currentState = "NotLoggedIn"
myAccordion.initialize(); }
would work but nothing happens. This is done in Flex 4.I know I can make a huge loop clearing each control individually and setting the selectedIndex of the accordion to 0.
Flex application is contained in one of the rows of a html table, and that row is hidden as per one use case. Flex application is refreshed when visibility of the row is changed to visible. This results in lose of data that is already entered in the flex application. Is there any way to stop this behavior?
View 1 RepliesWithin a child, I have an XML element with the following structure:[code]I then use a repeater to list each out onto the screen. There's a button I have created that is used to create a position. So, once the user clicks this button, I call the following function:[code]The above function creates a new XML object, puts some default values in, and appends it to the list of project positions. After appending the new information, I made the height of the project larger and then check to make sure the new project height isn't overlapping any other projects... but that information is irrelevant to this post.My problem is this - once i append a new child to the XML variable, it doesn't appear on the screen. Is there a "refresh" or "re-render" option i can do to the repeater in order to make the new child show?[code]Once i make the changes, and use the XMLListCollection as the dataprovider in the repeater, the information no longer loads on the screen.
View 1 RepliesMy first issue is that when my ArrayCollection only has one item, for some reason I cannot select that first item. The change function set on the mxml never gets called when I try to select that one item. If I set a prompt, it works. I know that the item is not already selected because when debugging, the selected item shows null. I do not want to use a prompt. I want the first item in the ArrayCollection to be selected automatically. So if there is only one item, I want the selected item to be that. FYI - I am using a labelFunction to format the data in the Array Collection. why I cannot select the first item or set the first item in the ArrayCollection to be the selected item?
My bigger issue is that when my Array Collection gets updated, my label function must not be refreshing because when I first open the dropdown, it has specfic data. When the Array Collection gets updated and I open the dropdown again, I see the old data in the dropdown, yet it doesn't exist anymore.
So let's say I have a ComboBox that has a datasource of an array collection of one state code and it's state name. Their is a labelFunction that puts a dash in between the state code and the state name. Their is no prompt, so the ComboBox would look like GA - Georgia and when you open the dropdown, that would be all that is there. I want that item to be selected automatically. why the old data shows up when opening the dropdown after the array collection was updated with new data?
<mx:ComboBox labelFunction="getFormattedNpaNxxCollectionList()"
dataProvider="arrayColl" change="doSomething()"/>
public function getFormattedNpaNxxCollectionList(item:Object):String
{
return StringUtil.substitute("{0} - {1}", item.stateCode, item.stateName);
}
I have an ArrayCollection we'll call "Items". It is essentially a flat collection of hierarchical data (each item has Parent and Children properties). I want an AdvancedDataGrid to display the data in hierarchical form, so essentially I could just do this and it would display fine:
// Note: RootItems would be an ArrayCollection that is updated so only the
// top level items are within (item.Parent == null).
var hd:HierarchicalData = new HierarchicalData(model.RootItems);
[code].....
I am using many external swf file in my flex application,but when i use the files which are in same name its not getting refreshing properly, so i need to delete my temp file without refreshing the application.
View 0 RepliesI have defined small MXML component which calls web service which returns random number on request, then my component displays the number.
How do I refresh the MXML from main application control, so it will recall server again?
I've added an eventListener to the COLLECTION_CHANGE event that is fired when the grid is finished resorting the items in its dataProvider, after the user clicks on a column header:MyType (myDataGrid.dataProvider).addEventListener(CollectionEvent.COLLECTION_CHANGE,onDataGridResort);
View 1 RepliesI am working on a problem since a week soon, but I still couldn't make it work as expected. I have a DataGrid which has HBox with a CheckBox an a Label as itemRenderer (see Code below). When I tap in to the Cell the standard itemEditor pops up and lets you enter the content of the label. Thats the standard behavior. I works fine except for 2 problems:
If I enter to much text, the horizontal srollbar pops up, and the cell is filled with that scrollbar. As you see I tried to set the horizontalScrollPolicy to off, but that doesnt work at all... I tried to do that for all the different elements, but the failure is still existent. When I have filled more than one row, there is an other mistake happening. If I tap on a row, the datagrid selects the one below that row. That's only if one line is already selected. If I tap outside the datagrid and then, tap at any row the itemEditor of the right row will show up... Is there anything now wright in the setup of my set data method?
package components
{
import mx.containers.HBox;
import mx.controls.CheckBox;
[Code]......
From this (normal dataGrid)
into this (horisontal data grid)
How to turn Flex MXML DataGrid into something like Horisontal DataGrid? (may be some how with Flash builder 4?)
Keeping all stuff DataGrid has like eating data from data provider sortind dragging - droping items etc
I have two datagrids:
- Division
- Members
Both have single columns. Selecting one item from Divsions datagrid should display members of that Division in the Members datagrid. But following code has some problem and Members of a particular division do not show up when respective Divsion is clicked.
Following are some snippets of the related code. Hope someone can spot an error in it.
[Code]..
For poor performance reasons, the DataGrid will cache checkboxes and reuse them for different rows. If you have 50 rows, it won't create 50 checkboxes. It will create as many checkboxes at are visible, plus a few more for padding, and then reuse them as you scroll. This is why you need to explicitly manage their state. How can improve it ? How can fixed checkbox value ? i used checkbox like below But checkbox doesnot remembering the values
[Code]...
I am attempting to style the headers in a flex datagrid and I keep getting the warning:
Type DataGrid in CSS selector 'DataGrid' must be qualified with a namespace
What does this mean? I have gone through a bunch of tutorials and none of them have worked. It seems like changing a the colors in a datagrid should be relatively simple.
Here is a code sample:
<mx:Style>
.headerCustomStyle
{
fontWeight: "bold";
[code]....
in Flex I have something like that: [code]and dg is ALWAYS pointing at DataGrid (even if dg1 has name DataGrid_test and dg2 = DataGrid_test2) and finally action is made on my first DataGrid (DataGrid_test).[code]and search still points at ColorColumn :/ My problem is really easy- I just want to pass to search different dataGrid on each state.But still I don't understand why it doesn't work. My search function uses algorhitm Boyer-Moor for searching through dataGrid.dataProvider for some text. If it find something then it is pushed into new array and after passing whole dataProvider I colorize rows with searched word.
View 2 RepliesI have a TabNavigator, and each tab is a Module. One of the modules is labelled Units and the full code of the module is posted in this post. There are several problems:
1) Forms are not populated with data from the datagrid selection.
2) Selecting a row and clicking delete gives the very-common error: TypeError: Error #1009: Cannot access a property or method of a null object reference.
A trace on the valueObject unit within the selectionChangeHandler function gives NULL. Why? Note: In other modules (other tabs of the TabNavigator), I have DropDownLists populated with units. This means that the valueObject Unit is defined in the other modules. However, valueObjects should be private to modules, and not shared.
[Code]....
i have a problem using the itemRenderer functionality. When using an ArrayCollection the visible Data in the DataGrid using the itemRenderer will be rendered just fine. But if i start scrolling the entries are repeating in the cells using the renderer. The cells are not filled with date according to the id. What mistake i'm doing here.
I read a lot of the explainations like:
[URL]
here is the code for the set data function (itemRenderer is extending HBox):
override public function set data(value:Object):void {
_data = value;
if(data!=null)
[code]....
I'm using Flex 4 and I need to render the data that resembles HTML Table with row span in a Flex component.My inclination was to use a DataGrid but I believe that rowSpan is not supported for that component. I looked at the AdvancedDataGrid but the user does not want to have a tree-structure in any of the columns. Looking to see if there are any hints/tips for modifying the DataGrid or AdvancedDataGrid to produce an "HTML Table with rowspan" look.
View 1 RepliesHow can you display a multi-line column header using the Flex Spark Data Grid for Flex 4.5?
View 5 RepliesI have a datagrid which is editable and I need to send that back to the database via a CFC for insertion into the database after all the editing is complete. Dumping the array collection to cfdump tells me that I have an array with items and a structure but i cannot understand how to "loop" through each and insert into the DB.There seems to be very little written which actually works! My MXML and CFC are below but give me the error of "You have attempted to dereference a scalar variable of type class coldfusion.runtime.Array as a structure with members." -which is nice
[Bindable]
private var getconsent:ArrayCollection = new ArrayCollection([
{LocationName:'Service A', Contact: 'Bob Jones' },
[code].....
I have several datagrids with changing columns. For the text fields the datagrid's sort function neems to be making a case sensitive compare. eg. the following list sorted would look like this apples strawberries Autos Autos should be with apples but since the capital A is counted differently all capital letters come after. I've found a lot of information on setting a CASEINSENSITIVE flag, but I can't figure out where to do this. The best solution would be one where I can override the default behavior to be case insensitive for all my datagrids and all my compare functions.
View 3 RepliesI am in a situation where user gets the cars data from the database based on the selection and displays it in datagrid like below ( for example)
Company Model Year No
GM Chevy 2010 10
GM Chevy 2009 5
GM Pontiac 2010 12
Honda Civic 2009 12
and there will be a link next to datagrid to get Pie chart based on the data displays in the data grid . The pie graph should display grouping by company and the count . I mean for the above example that should give with two pie items , one for GM showing the number of vehicles ( in this case 3 ) and Honda showing the number of vehicles ( in this case 1 ).
I thought of getting it from the database by querying and grouping it .But here the problem is after getting the data above in the datagrid user can able to filter at client end ( By year or model ) and can say get graph . This time that should only display the graph for the data visible in Datagrid .Grouping on database for every operation is becoming expensive. Since we have already data available at client end , is there any way to group it at client ..?
I am loading the data externally from xml and displaying in a datagrid. I have 2 buttons addRow and deleteRow. My datagrid headertext names are "name" "age" "rollno" "image", where image also will be loading externally thru an xml file. now when i am pressing the deleteRow button, whole row is getting deleted but an image icon is still appearing under "image" headertext. It was not an actual image but a blank image icon kind of thing is appearing, how to remove the icon. i want my whole row to be deleted. but its not happening.
View 1 RepliesThe flex DataGrid colums are arranged alphabetically by default. I need to order the DataGrid colums as per the order in its dataProvider. The dataprovider is the result of the HTTPService . And the number of columns is not known to us . The number of columns depends on the HTTPService result.
View 1 RepliesI want the comboBox to be placed in one of the columns of the datagrid header.The datagrid should be filtered according to the value selected in the comboBox.e.
View 1 Replies