Flex :: Changing A Flex Movie To Use Runtime Shared Libraries And Losing Text In Charts?
Dec 3, 2009
I'm creating a small size Flex movies which contains two line charts, at the moment the size of the release build swf is 343KB, which is too large for our needs.
I've tried changing the loading of the SWC file to Runtime Shared Libraries, but I found that this removed the text of the charts (the text for the x and y axis). Why would the text be removed when the Framework linkage is set as a Runtime shared library?
View 1 Replies
Similar Posts:
Nov 10, 2009
I have developed a flex application using the data visualization components. I am now trying to optimize the application and one of approaches I am trying is to use Runtime Shared Libraries.I have configured Flex Builder to deploy with Runtime Shared Libraries and have added the .swz file for the framework, datavisualization and rpc share libraries. After deploying, my application loads, however my axis values within each of my charts are missing. The axes themselves are shown, however they do not have their label units displayed. The series themselves are displayed too.I have tried this using the 3.4 SDK and also the 3.2 SDK within Flex Builder. I also tried compiling flex using the mxmlc ANT tasks and got the same results.I made sure that the framework RSL is getting loaded first and I also made sure that the global flash cache has been cleared before I tested.I can see from my access logs that the .swz files are getting loaded the first time I make a request for my application, so I am confident that I properly cleared the flash player global cache.
Does anyone know why my axis values would be missing only when I deploy with RSL??? Switching back to Merged mode, my application works fine and it is only when I deploy with RSLs that I get the issue.I have also tried to compile using only the framework RSL and not the datavisualization or rpc RSLs (keeping them in merged mode) and I get the same results, no axis values.
View 1 Replies
Jan 28, 2012
How can I do the following in Flex 4.5 or later: Compile an swc library file containing packages of simple functions Compile an swf application referencing the swc file as RSL Publish the swf application Send the source code of the swc file to another developer Allow the developer to modify the code of some functions while keeping their interfaces Allow the developer to compile the source code into a new swc file using only compc Allow the developer to replace my original swc file with his new swc file, then execute my swf application having the new swc file in the same directory.
View 1 Replies
Jun 7, 2011
Suppose that I have two applications running on the same page. I have the Libraries compiled into the SWF file: [code]Is RSL intended to just improve the download time (via caching) or does it also lower the memory foot print of an applicaiton?
View 1 Replies
Sep 10, 2010
Preface: I'm using Flash CS4 Professional for the Mac, AS3 and Flash Player 10.
I have an RSL (runtime shared library) SWF that contains bundled classes which I store in an online location. I also have another SWF that access that runtime shared library in order to instantiate it's classes and use their methods/functions.
Here's the code of the RSL:
Code: Select allpackage {
import com.thisCompany.customClassOne;
import com.thisCompany.customClassTwo;
import flash.display.Sprite;
[Code]......
I've also tried putting the code Security.allowDomain('*') (from import flash.system.Security) in the RSL SWF and it doesn't work.
what to do to let my my host SWF properly access the objects and methods/functions of my RSL in another domain?
View 1 Replies
Dec 29, 2011
How to use RSL(Runtime shared library) in flex ?how can decrease loading time of swf using rsl?
View 1 Replies
Jan 12, 2010
I am trying to use AlivePDF to save a chart into a .pdf file. However, when I try to save my chart, it ends up clipping half of the chart in the pdf so it isn't even fully visible. It seems that the screencapture that AlivePDF took to generate my pdf was too small.I am trying to get a chart from a sample to work with sample code for using alivepdf that I picked off the web.[code]
View 1 Replies
Jan 4, 2012
I recently switched a Flex project over to using RSLs. It built fine for quite a while but has recently dug its heels in and is giving me this error:configuration variable 'runtime-shared-library-path' requires a value for 'rsl-url'I went through all the flex XML files I could find and either this value doesn't exist or there are entries available for it. Nowhere did I see a <rs-url></rs-url> with no value.
View 1 Replies
Jan 26, 2011
I'm using AS 2.0 and experimenting. I've got one main movie, with buttons at the top, each button loading a movie into a common movie clip...there are nine buttons/movies in all.Here's my problem. The nine movies have some common elements which seem perfect to put in a shared library. The sharing works, but when I plug the shared elements (either backgrounds or buttons) into the movies:1. Any text typed in Flash disappears (the text is Classic and Static), and;2. The buttons lose their "button" properties. Hyperlinks/AS coding will not work on them. I've made sure the buttons have an instance name. I even tried creating invisible buttons on a layer above the library-linked buttons (having the latter just for show), but strangely, the invisible button, when placed directly above the library-linked button, doesn't work either.
View 1 Replies
Feb 15, 2011
When running a flash application that I run locallyie I get to it from a browser but with a file pathNow, most of the time the shared objects are stored in%APPDATA%MacromediaFlash Player#SharedObjectsXXXX#localWithNetBut occasionally, it reverts and thinks this application is running on localhost%APPDATA%MacromediaFlash Player#SharedObjectsXXXXlocalhostwhich means all previous saved settings are gone.I'm wondering if anyone knows how flash decides if the application is infact localhost or localWithNet (local with Network access)
View 4 Replies
Jul 3, 2011
When running a flash application that I run locally i.e., I get to it from a browser but with a file path
file:///C:/Projects/test/bin-debug/Main.html#
Now, most of the time the shared objects are stored in
%APPDATA%MacromediaFlash Player#SharedObjectsXXXX#localWithNet
But occasionally, it reverts and thinks this application is running on localhost
%APPDATA%MacromediaFlash Player#SharedObjectsXXXXlocalhost
Which means all previous saved settings are gone.
How flash decides if the application is infact localhost or localWithNet (local with Network access). Rebooting can sometimes make it revert, but I've also had it stay localhost for a few days then revert.
View 1 Replies
Oct 27, 2009
I have a css that defines de skin-class for a custom component, like this :
view|PlaceHolderView {
skin-class:ClassReference('view.skin.PlaceHolderSkin');
}
Is there a way to change that value at runtime, so that all instances of the component switch skin?
View 1 Replies
Feb 9, 2010
In the follow Canvas, how do I change the property top at runtime?
<canvas top="10"/> I tried:
<canvas top="{ topVariable }"/>
But the binding doesn't seem to take effect. How can this be achieved?
View 4 Replies
Jun 15, 2010
I want to make a button disabled if a datagrid is empty and it should be enabled when there is atleast 1 entry. The entries in the grid are made at runtime. I tried this this is the button:
<mx:Button id="update" label="Update Contact" enabled="{isButtonEnabled()}"/>
And the function is defined as where dg_contact is the datagrid:
public function isButtonEnabled():Boolean {
if(dg_contact.selectedIndex==-1) {
return false;
} else {
return true;
}}
View 1 Replies
Dec 20, 2009
I want to have the mouse cursor to be changed to hand when used for entering the<mx:textInput>. When the field is already on focus, text selection should be available.I tried any combination of useHandCursor="true", buttonMode="true" and mouseChildren="false",and the closest result is when using all three of them. Then the hand cursor does appear, but the text field loses its selection 'abilities' (text cannot beselected using the mouse). This is logical, since mouseChildren="false" disables this. But how do I acheive the desired result?
View 1 Replies
Nov 25, 2010
I want to give a good look and feel to the flex line charts. How to show it more attractive. I have done everything, now i want to show it more attractive/rich look and feel. can you guys provide me any samples.
View 3 Replies
Jul 28, 2011
I am trying to place an image besides the label in y-axis. So I have created a custom label renderer(A HBox containing and ). The source for the image has to be set based on a property present in the data provider. The problem is, I am not able to access the BarSeriesItem in the fnSetSource() method.
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
layout="vertical"
width="1280" height="750">
[code].......
View 2 Replies
May 25, 2009
I just recently made an online game and was asked to implement saving features. Everything works fine but a single detail... When I update the swf (right now I have a new version with corrected bugs) people are gonna lose all their saved data !
Is there a way to use the same shared objects over multiple swf ? Or simply to keep them over the version change ?
View 1 Replies
Jun 30, 2010
I've started using Shared Libraries and this subject peaked my interest... does Flash still have load timing issues with Shared Libraries? I found a few site online that mention that your Flash project will load but if it didn't have time to load your Shared Library, it simply won't load it and you are out of luck. Is this still true with the latest version of Flash? If so, how do I preload the library to make sure it doesn't happen?
View 1 Replies
Jan 22, 2011
using shared libraries at the moment for a scalable e-learning course. All the elements are to be used over multiple screens. BUT if I have to add a new element to that published shared swf - then next time I access my learning program it will have to download the WHOLE NEW shared library - is that right? ie: defeating the purpose in the first place. So if that is true then the best idea would be to use separate shared libraries. ie: sharedLibraryMusic1.swf sharedLibraryMusic2.swf for newer mp3s etc...
Or is this nonsense. ie: A new updated shared library with a "little" new element would not cause the whole swf to be downloaded again??? This is so important as it can make or break the download speeds.
View 4 Replies
Mar 12, 2010
i am trying to modify during runtime an image in my application, this image is located inside assets folder, so thats why i dissable -use-network=false flag, then i call something like this:img.source="../assets/pict.png";but it's not working.
View 1 Replies
Oct 1, 2009
1. I have a main app. It has a TweenLite project added as library. The linkage type is "Merged into code". All the classes including "TweenPlugin" are checked. If I check somewhere in code
ActionScript Code:
var obj:Object = getDefinitionByName("gs.plugins::TweenPlugin");
and then watch the object, it gives me: obj = gs.plugins.TweenPlugin$(@2edfbc1), which is pretty logical and is how it should be.
2. I have a module project, which has TweenLite project added as a library with linkage type checked to "External". I simply make a release build of this module.
3. In main app I load to released module manually (not through Flex module mechanisms), just with Loader class. Not really more complex than this:
ActionScript Code:
_loader = new Loader();
_loader.addEventListener(IOErrorEvent.IO_ERROR,onLoadingError);
_loader.addEventListener(ProgressEvent.PROGRESS,onLoadingProgress);
_loader.addEventListener(Event.COMPLETE,onLoadingComplete);
try
{
_loader.load(new URLRequest("some.swf"));
4. In the module there is TweenPlugin class used somehow in the code. Pretty natural thing is that class definitions are inherited from the application domain of a loader to an application domain of a loaded content. So the TweenPlugin class should be available.
However I get the error:
Quote:
ReferenceError: Error #1065: Variable gs.plugins::TweenPlugin is not defined.
View 6 Replies
Sep 7, 2010
Is there anyway where I can pass the Array values (not the array collection values) to the Bar charts or column charts using flex 3.5...
here is the thing i want:::
I have array values like this,,
array1 = [23, 49, 40, 239, 20, 80, 39,49,120, 24, 31,41];
and i want to show these values on the Yaxis and months on Xaxis....
I have two Qns,
1) how can I pass this array to Bar chart or column chart.
2) how do I need to show months on Xaxis. beacuse I'm asking this regarding, I have kept a filters that even if we want to see some months or a particular months or perticalar span of months... there on Xaxis it need to change the months dynamically depending on the filters..... (for ex, on Xaxis the values should be (Jan, Apr, Jun,Oct) if i select the 3 months period filter....)
I have written a logic to collect the values of those particular months into an array, but not understading how to pass this array to Bar chart,, beacuse there I don't know what Xfield and Yfield to be given....
View 1 Replies
Oct 17, 2011
i have created a group in run time and then added in it two buttons and one label
addElement (myGroup )
myGroup.addElement ( button 1 )
myGroup.addElement ( label )
myGroup.addElement ( button 2 )
now when i click on one button 2 i can get event.currentTarget.
How can i change the text of label using this event.currentTarget. How can i target the label
View 5 Replies
Jan 12, 2010
I am developing a flex charting web application which gets data from csv files. This application is supposed to be installed on the website of a client. The client uses a web server management system where the URLs generated are pretty long and contain non-alphanumeric characters. An example is given below:[URL].. The problem is that on my test server, the application is running just fine. But when deployed on the client's site, the application and the charts load, but the CSV data fails to load. The error given is:
Input output error: IO_ERROR I have tried both relative referencing (relative with respect to the swf file) and absolute reference to the URL of the csv file. But both approaches have failed.
I would ideally like to stay away from absolute URLs since that would break down if the charts need to move to another location.
View 2 Replies
Sep 6, 2010
I want to have my code/class library stored in an RSL (as a SWF online) which is then loaded during runtime by the host SWF. I learned about this technique from Colin Moock in his book Essential Actionscript 3.0 (Chapter 31: Distributing a Class Library).Now, I know that if you share graphics between SWFs via RSLs, you can update the graphic in the RSL and have all SWFs that access that RSL use that updated graphic.
But I want to store code in an online RSL, that is shared by multiple SWFs, and then when the code needs to be updated, I simply recompile the SWF (do I even need to worry about the SWC anymore?) containing the class library and upload and overwrite the existing RSL on the web. Voila! The code is now updated in all SWFs that share that RSL Class Library.The problem is, I can't get it to work right. CS3 and CS4 aren't updating and CS5 just crashes on export!
The code I'm testing with simply outputs some chosen text to screen.I want to change the string that's output by changing the code. Nothing fancy now, but it'll obviously be used for far more indepth stuff when (if?) I get this going properly.
View 1 Replies
Dec 9, 2009
I've built a flash site in which i want to resize a movie to the stage. I do it by keeping the proportion, thus i only resize the width and then i resize the height acordingly to the new width but keeping the proportion. The problem is that my film still looks "pixeled". I found a website on which the stage resizes dinamically with the movie and the background images without either of them losing quality. Till now i knew that resizing images or videos in flash at authoring or runtime produces pixeled results.
This is the website: [URL:]. Can someone tell me how do they do it without losing quality? just make the browser windowed and resize the margins to see the effect.
View 2 Replies
Nov 23, 2010
i am trying this:
open google docs, new document, and type in: hello world (world bolded)
then download it as html(zipped)
i unzip the html file, and save it to the assets folder in src folder of my Flex app
i have a Spark:TextArea instance and i want to do:
var importer:ITextImporter = TextConverter.getImporter(TextConverter.TEXT_FIELD_HTML_FORMAT);
myTextArea.textFlow = importer.importToFlow(htmlSource);
where htmlSource should point to the saved html file somehow
how do i do this? i tryed embedding, converting to ByteArrayAsset and to String, but i always get the source of the html file and not it's rendered rich text (ie "hello world).
[Code]....
View 1 Replies
Sep 6, 2010
I thought this was possible, but I seem to have trouble making it work.I want to have my code/class library stored in an RSL (as a SWF online) which is then loaded during runtime by the host SWF. I learned about this technique from Colin Moock in his book Essential Actionscript 3.0 (Chapter 31: Distributing a Class Library).Now, I know that if you share graphics between SWFs via RSLs, you can update the graphic in the RSL and have all SWFs that access that RSL use that updated graphic.But I want to store code in an online RSL, that is shared by multiple SWFs, and then when the code needs to be updated, I simply recompile the SWF (do I even need to worry about the SWC anymore?) containing the class library and upload and overwrite the existing RSL on the web. Voila! The code is now updated in all SWFs that share that RSL Class Library.
The problem is, I can't get it to work right. CS3 and CS4 aren't updating and CS5 just crashes on export!The code I'm testing with simply outputs some chosen text to screen.I want to change the string that's output by changing the code. Nothing fancy now, but it'll obviously be used for far more indepth stuff when (if?) I get this going properly.
View 1 Replies
Mar 13, 2011
I want to display XML exported from Oracle Database as a chart......
The xml has the following structure :
<ROWSET>
<ROW>
<ORDER_ITEMS_ID>1</ORDER_ITEMS_ID>
[Code]....
I've seen many chart examples using ArrayCollection as DataProvider . using the same way , i tried to set xml . But no results.
how to set an XML as dataprovider ? ( or XMLList or XMLlistcollection )( i'm developing a small app in AIR )
View 1 Replies
