I am having some problems with clipAndEnableScrolling, it works fine for VGroup when the parent has fixed height, but if the parent doesn't have a fixed height then it doesn't work and the content spills over. e.g:
<s:TitleWindow width="500" height="500">
<s:VGroup width="100%">
<s:Group width="100%">
[code]......
I have created a custom component - MyImage - that has two children including a Bitmap as well as a Sprite.My display object hierarchy is as follows -
mx:Canvas
view:MyImage
mx:Bitmap
[code].....
I got a Parent Sprite, let's name it SpriteP, which holds inside it two other Sprites. Sprite1 and Sprite2.[code]Sprite2 is a rectangle. When I rotate it, of course, the height of its parent, SpriteP, GROWS. But I would expect that height to go back to what it should be when I'm removing Sprite2!And it does! If I remove Sprite2 while NOT being rotated, the height of the parent drops back to normal, 200.
View 10 RepliesI got a Parent Sprite, let's name it SpriteP, which holds inside it two other Sprites. Sprite1 and Sprite2.
When Sprite2 is NOT rotated:
Code:
trace(SpriteP.width + ' ' + SpriteP.height); //100 250.
SpriteP.removeChild(Sprite2)
trace(SpriteP.width + ' ' + SpriteP.height); //100 200. -> works, 200 is good.
When Sprite2 is rotated at 90:
[Code].....
And it does! If I remove Sprite2 while NOT being rotated, the height of the parent drops back to normal, 200. But if I rotate Sprite2, the Parent won't update its bounds.
I've got the following Flex application markup:
<app:MyApplicationClass
xmlns:app="*"
width="100%"
[code]....
I want to create a text box with a fixed width that will fit itself to its current text. So I went ahead and wrote this simple application[code]...
View 2 RepliesI have placed 3 movieclips named mcParent, mcChild1, mcChild2 and 1 textbox in flash. child are childrens of parent movie clip. child1 and child2 both are of sizes 300 whereas parent movieclip is 600px, textbox is placed inside child2 movie clip .
I have made the flash to auto resize according to the screen area. Everything works well, but after resize it resizes parent and all childrens and textbox which is correct. The problem is with the correct placement of textbox on mcChild2. I have seen that after resize, mcParent width and scalex both changes but the child clips doesn't changed its sizes even they are stretched but there sizes are not updated due to which I am unable to get the exact location of where to place the textbox.
I know this question has been asked before but the other solutions didn't work for me quite well. here's my sample application.
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
[code].....
I have a VBox with fixed width and height, and I add image objects with fixed width and height. I find that if my objects' height exceed the VBox's height, it doesn't show the object. I tried validateNow(), but it doesn't work. The object is added, but VBox just doesn't display it, so it leaves a blank with a same height as my other object.
[Code]...
I have three datagrids inside VBox container. Since I don't want scrollbar in my flex widget i am increasing the height of SWF through javascript, which increases with each addition of row in my datagrid. My query is how can I get the exact height of my VBox which is the parent element of datagrid. I am not able to get the height of VBox. I have tried to use measuredHeight,height with no success.
View 1 RepliesI have code like the following:
<s:VGroup gap="10" id="group" height="100%">
<s:Label text="This is page 2" />
<s:Button content="Resize Canvas" click="resize(event);"/>
<mx:Canvas id="photoCanvas" color="#567898" backgroundColor="#125567">
</mx:Canvas>
</s:VGroup>
I don't understand why the following does not work:
Pushing the Button resizes the photoCanvas's height (gets taller or smaller). Since the photoCanvas control is a child element of the VGroup shouldn't the container update itself to the new height? The Vgroup has ALWAYS the same height, no matter what the (total) height of the children is! I would like the VGroup to adjust itself and get a height value equal to the sum of its children heights. Is this not possible??
I have a problem with an flash object. The object is an expanding topbanner, but when retracted, the on mouse over effect still appears on the invisible part of the banner. The code is the following:
<div id="exp_banner" style="width:930px; height:180px; overflow: hidden; position: absolute; z-index: 100;">
<object type="application/x-shockwave-flash" data="test.swf" width="930"
[Code].....
I have tried to add a style height to the object with an height of 180px, but then the banner scales down.
How can i make a dyn textfield with fixed height but variable with width?
ps what is the difference between
Code:
var pageContent:TextField;
vs
var pageContent:TextArea;
I am trying to define a flash movie with a fixed width but 100% height. I have the movie setup with an onResize handler. My problem seems to be in the HTML. I can get it to go 100% width and height or have it aligned top left but not centered.
Code:
html, body {
height: 100%;
margin: 0;
[Code]....
I want to place an object either directly on stage or in some other movieClip but I need to read parent height to align it properly from the bottom.I thought I could use this and it will work for both the stage and the movieClip and I could get away with one line of code:
Code:
trace(parent);
//[Object Stage]
trace(parent.height);
but this doesnt work for stage, I need to use this:
Code:
trace(parent.stageHeight);
which is the same as this: so obviusly I need to ask first whether the parent is the stage, so I can find the height...So what is parent.height actually outputting?
I'm creating an ActionScript-based flash file that only needs the screen to be updated in response to something happening behind the scenes. As such, I don't need it to run with a fixed frame-rate. Instead I just want to tell it to lay dormant until I explicitly tell it the screen needs to update.However, I don't see any way to do that. Can that be done? (i.e. set the framerate to zero and manually force an update based on some user-defined event?)For example's sake, if you can provide an example that just kicks off the update based on a simple timer,
View 2 RepliesI have a SWF that I am making Full Screen.
In one of the children I have a drop down tween that tweens from outside of the Full Screen Dimensions... the problem is this Child Clips height effects the height of the whole entire movie; so that it messes up the dimensions of the whole project --- ie making everything smaller because it is expanding the height of the parent clip.
I'm not sure how to fix this; I've looked through all the movie clip properties and stage properties and can't find a way to make it so that this child height doesn't get added to the whole size of the SWF.
I want to constrain the height of a flex component to the height of the browser viewport.
The component's children are populated from a database table using a repeater, and are basic checkboxes. There are enough of them that the flex app ends up being about twice the height of the screen, which means some of the rest of the layout goes crappy on me. How can I force the component that contains these to limit itself to the size of the viewport?
How to set a Spark List height to the height of its content?Tried this:
var lastRow:IVisualElement =
myList.dataGroup.getElementAt(myList.dataGroup.numElements - 1);
myList.height = lastRow.y + lastRow.height;
It works in case of a single item, but lastRow is null in case of more items.
By default the height of an Flex Accordion container is the height of the initially selected child. I'd like to be able to set the height to the tallest child so that no resizing or scrolling is necessary when other children are selected. I do not want to use the resizeToContent property. I want the size of the container to stay constant no matter what child is selected.
My current thought is to extend the accordion class setting the creation policy to "all" and then override the measure function to loop through all the children and find the tallest one and use that for the height. This seems a little kludgy though, so I'd like to know if there is a better approach. Ultimately my question is: is there a way to set the size of an accordion container such that the container never resizes and scoll bars are never necessary to display any of the children?
I would like to know the way to prevent a child swf from referencing its parent swf stage width/height?
for example, i created a child swf that loads image and center it on it's stage. As a stand alone its fine but i loaded it with parent swf, it centers on the parent swf instead.
I am going to embed a Flex app on an html page. The html page is already going to have a scroll bar to scroll up and down. The contents of the flex app are very dynamic, and I don't want to have an extra scroll bar when there is already one. So is there a way to make the height of the swf match the height of the contents of the swf?
View 2 Replieshttp:[url]....In my opinion, the way in which the photographs on this website scale, is perfect.I know how to load an image, dynamically, and add it as a child and in fact scale it.What I don't know, is how to scale it in the way the designer has in the example above.
The code I use to scale the Child (the image) at the moment is this:
//IMAGE WIDTH OVER HEIGHT
var ratio:Number = (1052/700);
//SET HEIGHT OF CHILD[code]......
The designer appears to have used minHeight and minWidth commands to ensure the image doesn't scale beyond certain height and widths.
i have this problem with my text field. i have this dynamic text field, and i want to load external text files and show them there. this all works fine and dandy but when i try to make a scrollbar along with it, it gives the height of the text field as the original one from the flash file, not the new text.
View 8 Replies[Code].....
Clicking on the html tag with asfunction doesn't work this way. I have to move the function part inside the myTextcontent.myMenu timeline to make it work. Instead of moving the function inside the movieclip which asfunction is targetting I would like to keep it all together. Is this possible? Perhaps some way to add a '_parent' code to ik looks for the function in the same layer as the asfunction line? Or some html back slashing so it moves up the 'tree' so it finds the function in the same timeline?
Is anyone know how to adding fixed gridlines chart in flex, for example: I have a vertical axis which has a minimum value 0 and the maximum value 100 but I only want to display gridlines on values 30 and 70.
View 1 RepliesI'm working on a map project with several movie clips that are dragged and dropped onto their respective movie clips.
PROBLEM: Initially, draggable movie clips are reduced their original size. When they are dropped onto their matching movie clip, I would like them to take the dimensions of the movies placed on the map. How to do that?
HERE IS MY CODE
stop();
var startX:Number;var startY:Number;var finalX:Number;var finalY:Number;
var finalWidth:Number;var finalHeight:Number;
[Code]....
I'm working on a map project with several movie clips that are dragged and dropped onto their respective movie clips. PROBLEM:
Initially, draggable movie clips are reduced their original size. When they are dropped onto their matching movie clip, I would like them to take the dimensions of the movies placed on the map. How to do that?
HERE IS MY CODE
stop();
var startX:Number;
var startY:Number;
var finalX:Number;
[Code].....
I'm using the hover caption tut to do a mouse replace which works here:URL...problem is when I load that swf into another parent swf the hover doesn't work.
View 6 RepliesI was wondering if there are anyways to get the fixed size swf file when I build my AS3 only project in Flex environment. I can't use scaleMode="noScale" since my swf is very small. I don't want it expand it to full browser winder either. Are there anyways to do it?
View 2 Replies