I have a datagridcolumn where a labelFunction is defined:
[Code]...
Would it be possible to add an additional parameter so that I could pass the property values for the formatter which I intend to use? Like for example:
[Code]....
Ok, here's my requirement in short-I have a datagrid that is updated every time data update is received. Now, all I want to do is check if the present value in every cell in a specific datagridcolumn is less than the new value then color that particular cell green, if the present value is greater than the new value then color it red, else leave previous color as it is. Simple?Now, the coloring part is important but comes later. As of now, I need to know how to get present cell data in the labelfunction of the datagridcolumn.
// column is a datagridcolumn
column.labelFunction = function(oData:Object)
{
[code]....
I have a DataGrid where one of the columns has a labelFunction. When I run the application a scrollbar shows up in the DataGrid indicating to me that it has data but there is nothing in the DataGrid. When I scroll items start showing up. When I Debugged it I noticed that the labelFunction was never being called until I started scrolling. Does anyone know why this is happening?
View 1 Replieshow to generate serial number using labelFunction in datagrid?
View 4 RepliesI have a DataGrid where some number of the columns can have a labelFunction. The nature of the labelFunction result can change problematically(eg apply formatting,bypass formatting. How do I get the DataGrid to re-render the visible items so that the labelFunction will be run again to get the new data.I've tried the invalidateDisplayList, validateNow, and tried dispatching ResizeEvents on the DataGrid.
View 1 RepliesIs it possible to put an itemrenderer on the DataGrid itself rather than a datagridcolumn? I could only find examples for datagridcolumn. I want a generic itemrenderer on all the items in a datagrid...
View 1 RepliesI'm trying to reach the dataField of a DataGridColumn in the itemRenderer. Below is the dataGrid:
<mx:Script>
<![CDATA[
[Bindable] public var weeksOfMoth:ArrayCollection = new ArrayCollection([
[code].....
In the set data function of the itemRenderer, I receive an entire week (which is ok), but the itemRenderer doesn't know which day to use because the dataField is unknown. Does anyone know how to reach this dataField in the itemRenderer?
I am unable to compile the following Flex application.All I am trying to do is, to extend DataGridColumn class.I get the following compile error :
Could not resolve to a component implementation.
DataGridColumnTest/src DataGridColumnTest.mxml line 6
DataGridColumnTest.mxml :
[code]........
I have the following datagrid:
<mx:DataGrid id="question" x="9" y="289" width="100%" height="54" visible="{false}" >
<mx:columns>
<mx:DataGridColumn dataField="ans1" headerText="ans1"/>[code]..........
I need to access the data pointed by the dataField, and bind it to a label, but i don't known how to get it.
<s:Label id="debug" x="575" y="106" width="56" height="35" text="{data_from_coloumn_grid_ans1}" />
Is there anyway to create a custom item editor based on the dataField value? For example:
<mx:DataGrid editable="true" dataProvider="{_actionArr}" id="prop">
<mx:column>
<mx:DataGridColumn headerText="Component" editable="false" dataField="label"/>
[code]....
I have this code. I want to add Buttons in the second column of the data grird.
[Code]....
How can I add buttons in second column using an ItemRenderer?
On my flex (flash builder 4) DataGrid - DataGridColumn , I have set a custom itemRenderer
itemRenderer="myComponents.EncounterDGItemRenderer".
My renderer is a Label
public class EncounterDGItemRenderer extends Label
I found that my tooltips (datatips) stopped working once I started using this custom renderer. I also found that I can set the tooltip on the label in the
override protected function updateDisplayList
by setting:
toolTip=data['addedDate'];
This works find, however the problem is I need to choose a different data field based on the column. I was hoping for something similar to how a DataGridColumn labelFunction works - where I have access to "column.headerText" or "column.dataField". However I only have access to the underlying data object, not the name of what is being displayed (unless I am missing something).
Is there a way in a data grid item renderer to know what the column header text is, or do you have a different approach?
I have a DataGrid whose dataProvider is an Array of int Arrays (each with different lengths). Since each row has variable size (and I want to display all the data), I decided to extend DataGridColumn and overwrite the itemToLabel function to be able to display the data. The problem is that I also need to display the data differently depending on the int value.
I believe the only solution is to write an itemRenderer, but the only input the itemRenderer.set(data) function receives is the entire int Array. I believe I need either the exact string returned by itemToLabel or the column index of the cell the itemRenderer is for (to basically do the same parsing I implemented in itemToLabel).
I have a DataGrid[code]The datagrid does not scroll down after i've added 2 text components in a datagridcolumn.The scrollbar scrolls back up on pulling it down.
View 2 RepliesI have a Flec Bar chart. It has a Bar series. I need to show the datalabel at the tip of the bars. For this am using labelFunction.This works fine. Now I want to add a plotseries in the same chart. Once it is added the labelfunction in the bar series is not working. The labels are not visible.[code]
View 1 RepliesMy first issue is that when my ArrayCollection only has one item, for some reason I cannot select that first item. The change function set on the mxml never gets called when I try to select that one item. If I set a prompt, it works. I know that the item is not already selected because when debugging, the selected item shows null. I do not want to use a prompt. I want the first item in the ArrayCollection to be selected automatically. So if there is only one item, I want the selected item to be that. FYI - I am using a labelFunction to format the data in the Array Collection. why I cannot select the first item or set the first item in the ArrayCollection to be the selected item?
My bigger issue is that when my Array Collection gets updated, my label function must not be refreshing because when I first open the dropdown, it has specfic data. When the Array Collection gets updated and I open the dropdown again, I see the old data in the dropdown, yet it doesn't exist anymore.
So let's say I have a ComboBox that has a datasource of an array collection of one state code and it's state name. Their is a labelFunction that puts a dash in between the state code and the state name. Their is no prompt, so the ComboBox would look like GA - Georgia and when you open the dropdown, that would be all that is there. I want that item to be selected automatically. why the old data shows up when opening the dropdown after the array collection was updated with new data?
<mx:ComboBox labelFunction="getFormattedNpaNxxCollectionList()"
dataProvider="arrayColl" change="doSomething()"/>
public function getFormattedNpaNxxCollectionList(item:Object):String
{
return StringUtil.substitute("{0} - {1}", item.stateCode, item.stateName);
}
I've a AdvancedDataGridColumn which has both 'labelFunction' and 'dataTipFunction' defined.I want dataTipFunction to return the output of 'labelFunction' + someText.
P.S : The problem here is dataTipFunction doesn't have access to 'column' object.
issue is that when a user clicks a datagrid cell that has a combobox editor and then immediately clicks away from the cell, the text value in that cell disappears. I have an itemEditEnd handler on the datagrid and it shows the value of the property I use as the editorDataField just fine. But the labelFunction (which gets called after the itemEditEnd handler) on that grid column sees it as zero. Why aren't the labelFunction and item editor playing together nicely? Here is the DataGridColumn:
[Code]...
I have a ComboBox with a label function like this one:
private function fieldLabelFunction(item:Object):String {
return resourceManager.getString('dashboard',"SS." + item);
}
When I change locales, the labels display correctly in the ComboBox's dropdown list, or if I change a selection. However, the currently selected item's label doesn't refresh at first. Is there a way to force the labelFunction to get called again?
I have an AdvancedDataGrid with a custom label function whose value can change based on other form status (specifically, there's a drop down to choose the time display format for some columns).Right now, I have this labelFunction:
internal function formatColumnTime(item: Object, column: AdvancedDataGridColumn): String {
var seconds: Number = item[column.dataField];
return timeFormat.selectedItem.labelFunction(seconds);
}
[code]....
... and the timeFormat object is a combo box with items whose labelFunction attributes are formatTimeAsFractions and formatTimeAsInterval.The columns that have time formats have formatColumnTime as their labelFunction value, because extracting the seconds in that function and passing it in to the formatters made for a more testable app (IMHO).
when the timeFormat.selectedItem value changes, I want to force my grid to re-calculate the labels of these colums. What method must I call on it? invalidateProperties() didn't work, so that's out.
I'm building an application using flex 4.
Using <mx:DataGrid> to display a table.
I would like to add a <s:GlowFilter> to a DataGridColumn. How can I do so?
I have this DataGrid:
<mx:DataGrid id="myDataGrid">
<mx:columns>
<mx:DataGridColumn dataField="colA" headerText="Column A:" width="40"
[code].....
I am using a custom componenet based off of text as an itemRenderer for a dataGrid that is displaying an XMLList. I want to be able to re-use this itemRenderer for multiple columns, how do I access the dataGridColumn so I know which field to assign to the text value?
super.data gives me the whole XML item, super.parentDocument gives me the whole DataGrid
I have a DataGrid with 3 DataGridColumns. All 3 of them have separate dataFields.I need to get the datafields into an ArrayCollection and pass it to a funciton. I dont want to hard code the ArrayCollection.
View 1 Replieshow to concate two datafield in a datagridcolumn?
View 2 RepliesHow do I make text selectable (so I can copy) in a DataGridColumn?
View 2 RepliesI have a datagrid that I want to add a column of radio button using AS3 (instead of mxml). I was able to do this with a custom itemRenderer.
var dgc:DataGridColumn = new DataGridColumn();
dgc.itemRenderer = new ClassFactory(com.mypackage.RadioBtnColumnItemRenderer);
In my RadioBtnColumnItemRenderer.mxml, I have a box with a radioButton... like so:
<?xml version="1.0" encoding="utf-8"?>
<mx:Box xmlns:mx="[URL]" horizontalAlign="center" verticalAlign="middle">
<mx:RadioButton id="btnRadio" groupName="btnRadioSelect"/>
</mx:Box>
When I run the application, the radio button shows up in the column as it should. However, I cannot select just ONE of the radio buttons. I am able to select all of them, but I don't want this... I want the ability to select one and then if I select another one, then the first one is unselected and the current one becomes selected (just like you would expect radio buttons to work).
How can I validate the cells in a DataGridColumn individually? (ActionScript 3.5) The validation is configured per-cell, based on fields in the given row. For example
FIELD VALUE TYPE
age 13 Integer
height 13x3 Integer
[code].....
I have an itemrenderer used by multiple datagridcolumns and I need to have some condition in the itemrenderer based on the headertext of the datagrid column. Can I access the headertext property from within the itemrenderer?
My itemrenderer extends the LinkButton control and implements the IDropInListItemRenderer interface.
I can't see a way to get rid of certain borders within a DataGrid. I'd like to eliminate a side border on 2 of my columns so that they appear to look like a single column.I'm trying to implement a "clear value" button on each of my DataGrid rows. I was able to have a button show on a custom ItemRenderer from a separate ActionScript file, but I was unsure how to have the button click event propagate to the mxml file where the DataGrid is located. It would be much easier for me to have an extra unresizable column with a 'clear' button.
So, to reiterate: Is there any way to change the border style or eliminate certain borders of a DataGridColumn?