I was trying to find a bandwidth profiler in flex like there used to be one in Flash but couldn't really find one. Is there a way, that I can do bandwidth profiling of my local swf?I'm using Flex Bulider with a AS3 project.
View 2 RepliesI'm working on a Flash CS5/AS3 pre loader, and the bandwidth profiler is telling me that my frame 1 size is massive - about 850kb. Frame 2 is 128kb. This results in a white screen during the bulk of loading, followed by the brief and now-unecessary preloader, and then the rest of the swf.
I have a setup of two frames, the first being the preloader with the following code:
stop();
addEventListener(Event.ENTER_FRAME, preLoad)
function preLoad(event:Event):void{
var bytestoLoad:Number = loaderInfo.bytesTotal;
[Code].....
The .as file associated with the fla has tons of other information, a full game.
I've already gone through my library and on all the symbols with Linkage, unchecked the "Export in Frame 1". Also the pre-loader is small, only a text box and a shape.
How can I get more detail of it's loading in frame 1 so that I can move it to frame 2?
I just noticed a workaround something that's been annoying me for a long time. Occasionally my projects vertically line up funny if clip y-coords or heights are based on frame 1 stageHeight. I always thought it was a load-time duration or something like that, but it turns out to be bandwidth profiler (CS4 authoring). Try this on frame 1 of a new, empty project:
this.addEventListener(Event.ENTER_FRAME, this.entf); function entf(evt:Event):void{ trace(this.stage.stageHeight); }
When bandwidth profiler is on, the first frame reports -100 the real stageHeight. Now to avoid the problem I just turn off bandwidth profiler. Is it just a bug?
I have made a preloader that is in the same swf as my main Movie.I went and set all my linked movieclips to *not* export in the first frame.However, I seem to still have quite a bit loading in my first frame (64kB) and I can't quite figure out what it is? The only movieclips I have set to export in my first frame is my preloader movieclips ("container" and "preload bar") both of which are simple shapes I made in flash.
View 1 RepliesI'm currently hunting a memory leak related to XML objects. FDT's profiler shows results that match my expectations while Adobe's profiler doesn't show any XML objects at all.
Are there any differences between Adobe's profiler that comes with Flash Builder and FDT's profiler or is that a configuration issue?
My Flex application has some memory problems which I'd like to find using the profiler. However, when I run the profiler from Flex Builder, nothing happens. The appication is run the regular way, but nothing is profiled. The Profiling perspective doesn't event open, and when I open the Profiling perspective, no memory usage is displayed.
Can anyone help me out here?
Is there a way for flash to detect a user's bandwidth, and depending the size of bandwidth, stop loading, or continue with the load? Now that I'm thinking about it, this would probably be a javascript detection script and if the bandwidth is high, load .swf, if not load a .jpg?
View 3 RepliesWe are having a little problem implementing bandwidth detection with FMS, for some reason when enable it, bandwidth consumption spikes significantly I am wondering why? and if there a white paper somewhere that would talk about how properly implement this feature.
View 4 RepliesI have an AIR/Flex app I made, I have a few people testing it and everyone is reporting that after leaving it running for a while, it is making all there machines run very slow. It runs fine at first so this must be a memory leak somewhere. I used the profiler on this and the only thing that shows as using a substantial amount of memory is MethodQueueElement which is not a class I wrote, and I have no idea what it does, I am assuming its part of the Flex framework. I am not familiar with using a profiler so I am not sure what all I shuld be looking at, that was the only class that was high on "memory" and it said it had over 100,000 instances. If this is my problem what can I do to fix it?
View 1 Replies... by which I mean a project that's sitting on a web server somewhere.
View 1 RepliesI'm having trouble; the Facebook API that I'm using throws a whole bunch of errors where it has [Bindable] and such. I'm a bit stuck.
View 6 RepliesI'm trying to use the Profiler for the first time so I don't know much about it. But it doesn't seem to work.I run my project under profiler, it says it is running, but no window shows up. Nothing. I can see the project's icon down there but I see no window at all.Can this be cause by the fact that I'm using Flex 4.5? You can the app in the dock and it shows its live objects, but I don't see the apps' window and cannot interact with it. The app is just a simple 400x400 window with some black shapes in it.
View 2 RepliesHow to retrieve fms bandwidth into flex?
View 2 RepliesHow to retrieve fms bandwidth into flex?
View 1 RepliesMaking a simple demonstration with three buttons which gotoAndStop on 3 different frames using AS3. Have done this lots of time with CS4 without issue. When I publish/preview my work and load the .swf it is blank for a split second and then loads frame 1 of my timeline (but says it is on frame 2 of my movie - in the bandwith profiler). When I try to look at the bandwith profiler it shows my page 1 as page 2, and when I click around the buttons my flash file does load the different frames correctly, but doesn't display them on the bandwith profiler - everything just stays on frame 2. Every time I try to drag the slider back to frame 1 it plays to frame 2. Everything should be on frame 1.
Can someone tell me what I am doing wrong, or what I need to do for instantanous loading of content (this is very very light content, should be immediate) and how I get my bandwith profiler to show the navigation to different frames as I click around? Tried to look and find scenes - can't find that dialog either, did they ditch it? Am I running into this new built in preloader? How can I disable it?
I'm using Adobe Flash CS 4 and would like to know are there any profiler or memory analysis tools available for it ? (actionscript 3). I know there are available tools for Flex, but are there for Flash CS 4 instead?
View 3 RepliesI'm working with a large modular app, and most of the swfs were made in Flash Professional. When I load the app in the Flash Builder Profiler, the memory usage appropriately goes up and down as I add and remove modules. When I flip between two modules many times, I end up with the current memory in the Profiler more or less where I started at around 2 megs. System.totalMemory, however, shows that the flash player has only been allocating memory and is currently using 106 megs. Is there a certain bug known to do this, or is there a better way to detect memory leaks? I'm using the latest flash player debug version.
Note: The SWF modules are all permitting debugging, and the Profiler picks up objects in them.
I found this link which explains how to profile a Tamarin application with vtune. Since tamarin and Adobe Flash share the same code base, can I use it to profile Flash apps too ?
View 1 RepliesAnyone else has experienced weird behaviors and unexpected values when checking for stage.stageHeight while you have Bandwith Profiler open in Flash IDE?
I have been using this for testing Perlin Noise stuff:
[Code]...
As you see here, the swf is set to a height of 400 When executed with test movie, control-enter, the trace returns 400 .. now, if you try this with the Bandwidth Profiler open, it would return 300, and the Sprite would only extend to 300 height.
I have a Flex 4.6 web game which displays 2 Lists with virtual layouts with 2 custom item renderers. The renderers consist mainly of BitmapImages displaying user avatars + few Labels.
The Lists are being updated often over TCP socket with gzipped JSON data. I merge that data into 2 ArrayCollections serving as dataProviders for the Lists. This seems to work well, the Lists do not flicker and are updated correctly (I've monitored debug traces a lot to get it right).
[Code]...
I must rejected all users outside Denmark from our live streaming (c-ip) and this is done in an access plug-insBut now I need to open up one of the streams, but I can't get the streaming name in the access-plug-ins only in the Auth-plug-ins.I cant use x-page-url or s-uri I need pStreamName. in access-plug-in like thissetStringField(m_pAev, IFmsAuthEvent::F_STREAM_NAME, pStreamName);but I cant get it inside the access-plug-in
View 1 RepliesI am trying out to deploy a flex application in one of our servers. I was able to deploy it but running it causes some problems like missing swfs. One of these missing swfs is the sparkskins, which I am not sure where to get from.
View 1 RepliesI made a document preloader thanks to kieth bit101. However i cannot test it.
View 5 RepliesWhere can I find the path to the Flex SDK? Last time I embeded metadata, Flash CS5 automatically found it for me. This time its not working. I get this message in the output window:You have used a feature that requires the Flex SDK:"Embed" metadata Please set the Flex SDK path if necessary and add it to the library path for this file. The Flex SDK folder contains the bin, frameworks, lib and other folders.
View 3 RepliesI'm attempting to compile my Flex project with an ANT build script.One of my MXML components references an external XML data file, like this:
<mx:XML id="treeData" source="assets/data/help.xml" />
When I build the project using Flex Builder, it compiles fine. However, when I try to compile it using ANT, I get the following error:
Error: Problem finding external XML: assets/data/help.xml
How come ANT isn't finding the XML file? Apparently it knows the source path otherwise it would not have found the component to begin with. I added the source path to the target anyway, but it doesn't seem to have made any difference:
<source-path path-element="${SRC}" />
I am loading data from one sample.xml file using http service. the xml file will generated by jsp and it is saving in one proper location like(d:/programfiles/some.xml).now when I first time login to application i need to check whether that xml file is present or not. How can I check?
View 2 RepliesI'm working on a build script in the Flash Builder version of Eclipse. This build script needs to import launch configuration .launch files into the user's workspace. However there doesn't seem to be an available ANT var for determining the workspace location. While stepping through the available vars with intellisense I noticed that ${osgi.instance.area} does point to my current workspace but when I tried to echo it back in a running ant script it just spat out "${osgi.instance.area}" and not the path.
View 3 RepliesI'm opening popups (subclass of TitleWindow) in Flex by using
PopUpManager.createPopUp(parent, TrainCard)
Is there any way I can get a list of popups that are open? Or do I need to keep my own list?I need to make sure I'm not opening the same popup twice.
I would like to get the user's IP locally without any invoking any service.
View 1 RepliesI need to recalculate the max value of lineChart according to the visible lineseries. In the application I have the ability to make visible or not the lineseries of the graph and if I make not visible the lineseries with the actual top value I want to zoom in and change the top value of the graph.
View 1 Replies