Professional :: Lag / Bandwith Profiler Cs5 Change?
Apr 11, 2011
Making a simple demonstration with three buttons which gotoAndStop on 3 different frames using AS3. Have done this lots of time with CS4 without issue. When I publish/preview my work and load the .swf it is blank for a split second and then loads frame 1 of my timeline (but says it is on frame 2 of my movie - in the bandwith profiler). When I try to look at the bandwith profiler it shows my page 1 as page 2, and when I click around the buttons my flash file does load the different frames correctly, but doesn't display them on the bandwith profiler - everything just stays on frame 2. Every time I try to drag the slider back to frame 1 it plays to frame 2. Everything should be on frame 1.
Can someone tell me what I am doing wrong, or what I need to do for instantanous loading of content (this is very very light content, should be immediate) and how I get my bandwith profiler to show the navigation to different frames as I click around? Tried to look and find scenes - can't find that dialog either, did they ditch it? Am I running into this new built in preloader? How can I disable it?
View 1 Replies
Similar Posts:
Feb 13, 2010
Anyone else has experienced weird behaviors and unexpected values when checking for stage.stageHeight while you have Bandwith Profiler open in Flash IDE?
I have been using this for testing Perlin Noise stuff:
[Code]...
As you see here, the swf is set to a height of 400 When executed with test movie, control-enter, the trace returns 400 .. now, if you try this with the Bandwidth Profiler open, it would return 300, and the Sprite would only extend to 300 height.
View 2 Replies
May 12, 2011
I'm currently hunting a memory leak related to XML objects. FDT's profiler shows results that match my expectations while Adobe's profiler doesn't show any XML objects at all.
Are there any differences between Adobe's profiler that comes with Flash Builder and FDT's profiler or is that a configuration issue?
View 1 Replies
Mar 9, 2010
I build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
View 3 Replies
Mar 1, 2010
My Flex application has some memory problems which I'd like to find using the profiler. However, when I run the profiler from Flex Builder, nothing happens. The appication is run the regular way, but nothing is profiled. The Profiling perspective doesn't event open, and when I open the Profiling perspective, no memory usage is displayed.
Can anyone help me out here?
View 1 Replies
Mar 16, 2010
I just noticed a workaround something that's been annoying me for a long time. Occasionally my projects vertically line up funny if clip y-coords or heights are based on frame 1 stageHeight. I always thought it was a load-time duration or something like that, but it turns out to be bandwidth profiler (CS4 authoring). Try this on frame 1 of a new, empty project:
this.addEventListener(Event.ENTER_FRAME, this.entf); function entf(evt:Event):void{ trace(this.stage.stageHeight); }
When bandwidth profiler is on, the first frame reports -100 the real stageHeight. Now to avoid the problem I just turn off bandwidth profiler. Is it just a bug?
View 2 Replies
Mar 21, 2010
I was trying to find a bandwidth profiler in flex like there used to be one in Flash but couldn't really find one. Is there a way, that I can do bandwidth profiling of my local swf?I'm using Flex Bulider with a AS3 project.
View 2 Replies
Jul 20, 2009
I have an AIR/Flex app I made, I have a few people testing it and everyone is reporting that after leaving it running for a while, it is making all there machines run very slow. It runs fine at first so this must be a memory leak somewhere. I used the profiler on this and the only thing that shows as using a substantial amount of memory is MethodQueueElement which is not a class I wrote, and I have no idea what it does, I am assuming its part of the Flex framework. I am not familiar with using a profiler so I am not sure what all I shuld be looking at, that was the only class that was high on "memory" and it said it had over 100,000 instances. If this is my problem what can I do to fix it?
View 1 Replies
Nov 17, 2009
... by which I mean a project that's sitting on a web server somewhere.
View 1 Replies
Jan 11, 2010
I have made a preloader that is in the same swf as my main Movie.I went and set all my linked movieclips to *not* export in the first frame.However, I seem to still have quite a bit loading in my first frame (64kB) and I can't quite figure out what it is? The only movieclips I have set to export in my first frame is my preloader movieclips ("container" and "preload bar") both of which are simple shapes I made in flash.
View 1 Replies
Dec 9, 2009
I'm using Adobe Flash CS 4 and would like to know are there any profiler or memory analysis tools available for it ? (actionscript 3). I know there are available tools for Flex, but are there for Flash CS 4 instead?
View 3 Replies
Oct 11, 2011
I'm working with a large modular app, and most of the swfs were made in Flash Professional. When I load the app in the Flash Builder Profiler, the memory usage appropriately goes up and down as I add and remove modules. When I flip between two modules many times, I end up with the current memory in the Profiler more or less where I started at around 2 megs. System.totalMemory, however, shows that the flash player has only been allocating memory and is currently using 106 megs. Is there a certain bug known to do this, or is there a better way to detect memory leaks? I'm using the latest flash player debug version.
Note: The SWF modules are all permitting debugging, and the Profiler picks up objects in them.
View 1 Replies
Nov 28, 2011
I found this link which explains how to profile a Tamarin application with vtune. Since tamarin and Adobe Flash share the same code base, can I use it to profile Flash apps too ?
View 1 Replies
Nov 17, 2009
I'm having trouble; the Facebook API that I'm using throws a whole bunch of errors where it has [Bindable] and such. I'm a bit stuck.
View 6 Replies
May 17, 2011
I'm trying to use the Profiler for the first time so I don't know much about it. But it doesn't seem to work.I run my project under profiler, it says it is running, but no window shows up. Nothing. I can see the project's icon down there but I see no window at all.Can this be cause by the fact that I'm using Flex 4.5? You can the app in the dock and it shows its live objects, but I don't see the apps' window and cannot interact with it. The app is just a simple 400x400 window with some black shapes in it.
View 2 Replies
Feb 21, 2012
I'm working on a Flash CS5/AS3 pre loader, and the bandwidth profiler is telling me that my frame 1 size is massive - about 850kb. Frame 2 is 128kb. This results in a white screen during the bulk of loading, followed by the brief and now-unecessary preloader, and then the rest of the swf.
I have a setup of two frames, the first being the preloader with the following code:
stop();
addEventListener(Event.ENTER_FRAME, preLoad)
function preLoad(event:Event):void{
var bytestoLoad:Number = loaderInfo.bytesTotal;
[Code].....
The .as file associated with the fla has tons of other information, a full game.
I've already gone through my library and on all the symbols with Linkage, unchecked the "Export in Frame 1". Also the pre-loader is small, only a text box and a shape.
How can I get more detail of it's loading in frame 1 so that I can move it to frame 2?
View 2 Replies
Feb 28, 2010
i have a jpg in the library of another swf called on stage, jpg has export for AS with an identifier, in the main movie there's a timeline with frames. i need the jpeg to change hue when the frame is entered, i can put the action on the frame it self or elsewhere doesn't matter, but how can i make the jpg change hue?
View 6 Replies
May 8, 2010
I have a huge project that was built with Flash 8. There's a lot of AS2 cobbled together. When I built this thing in 2008 I just bearly knew what I was doing. The project was shelved and the Flash-cells in my brain gathered dust until now. Over the past 3 weeks I've been opening the FLAs in CS3. When I save them I get the choice to Save as CS3 or SaveAs Flash8. In my fog I've been going with the default of CS3.
Now I find aspects of the project are not playing on WinXP (and maybe other Windows versions) when burned on a CD. The broken aspects I've found so far are: many of the textfields aren't seeing their CSS and NONE of the FLVs will play. (I didn't use FLVPlayback components but an elaborate AS2 script from an AS2 tutorial.)
Have I toasted the AS2 in the project by saving the files in CS3's default?? Has CS3 changed the AS2 in some way that would effect things like FLVs and textfields and CSS?
View 4 Replies
Mar 1, 2010
instead of seeing INDEX is there a way to change it to say "the5150crew.com"
View 6 Replies
Mar 16, 2010
I was wondering if there is a way to change fps(Frames Per Second) during run time using AS3.is there? if so is it recommended? or is there a way to slow down the execution of the code(like adding a pause?)
View 5 Replies
Dec 1, 2010
I have a movie that, at the end, has an image that can be clicked to go to a site. I need to change the URL and have no idea where to proceed. So far, I have found the object in the library and it's called a "sprite" and has something in the "linkage" field next to it. I've right clicked on it and tried both the Edit and Properties options and can't find what I am looking for anywhere.
View 4 Replies
Mar 24, 2011
I want to know if there is a method to change swf to gif. I tried to import swf file into stage or library under Adobe Flash CS4 Professional,and export it to gif,but I can't import swf.How to import swf? Is there a free software to change swf to gif?
View 1 Replies
Mar 20, 2008
I have a movie clip on my stage with various elements in it. When I edit this movie clip all the coordinates for the various elements have really random values because the registration point is not set to the top left corner of the symbol but I can't find any way to change the registration point - nothing I've found online so far works.
View 3 Replies
Jun 22, 2009
So I was doing my usual work with flash when I switched to my brush. Wanted about an 25 or so but i couldn't change the stroke size. It doesn't say anything it just won't let me drag it. Its really irritating..
View 4 Replies
Jan 8, 2010
I have been tasked to create banner that has four mouseover areas. The main body of the banner--which includes hyperlinks--and the background of the entire banner must change as the user mouses over the four areas. See the diagrams at the following link (it is not working properly):I attempted to complete this task as follows, but it really isn't behaving properly. I created a layer of buttons and text, and set the alpha levels to 0 for the "over" state of each button. I then created four separate layers containing the appropriate content. When the user mouses over a button on the left, the proper layer would be displayed. I planned to use Actionscript to accomplish this; pseudocode here:
IF button1.mouseover == true THEN { display layer1, hide layers 2, 3, and 4 }
IF button2.mouseover == true THEN { display layer2, hide layers 1, 3, and 4 }
IF button3.mouseover == true THEN { display layer3, hide layers 1, 2, and 4 }
[code].....
View 11 Replies
Jan 20, 2010
I am wanting to create an effect like the following site.I am using Flash CS3.[URL]
View 2 Replies
Feb 1, 2010
I have Macromedia Flash MX 2004. I need to change the images in an fla file for inclusion in a new Web site. I have inherited an fla file and am just learning the in-and-outs of using Flash. I have been trying to figure out/learn what to do. But I am now under a deadline.
How to I replace the old images with new ones?
View 7 Replies
Mar 22, 2010
Is there is a way? ASAP
View 3 Replies
Apr 2, 2010
I'm trying to work with a very long image that scrolls through a page. Piecing it together, it's roughly 12000 pixels wide. I can't view the image because the pasteboard seems to only be around 3000 pixels. Is there a way to increase pasteboard size?
View 7 Replies
May 1, 2010
Is there a code or something that can change my gallery contents ? I want new pictures to be loaded in my gallery when i click a button.
View 3 Replies
