I have two panels and a button nested within an hbox. I want the panels to appear side-by-side and the button to appear under both panels equi-distant from the sides of the hbox (i.e. in the center).Getting the panels side-by-side was easy, but how do I get the button below both panels and in the center. Currently, the button show up to the right of the second panel.
View 1 RepliesI posted the same question but I think it was not so clear. Now I am rephrasing my question with real problem.I have a flex application. It is basically a web application. On it I have a player that play avi files and some buttons and tabs along side.The application also have recording button that records that direct stream from an IP cam and store that stream on the media (USB). How can I automate function testing of such application. Like I have confusion that when I press the recording button but can I be sure that recording starts? I have tried RIATest and flexUnit 4.
View 2 Repliesi am working in application of twitter in flex 3 and action script 3, this in the text area when the user write my application automatically change http address to a short address but i don't know find the address within the text
View 2 Replieshow to make the preloader works on the full screen website/ fluid layout. I add the Stage.resize on the code for FYI When I added this code to the bar, it expanded to full screen, but there's no loading bar. The text is also no progress.
View 1 RepliesI'm creating a container and it's content at runtime. Here's a rough structure:
--VBox
----Form
-------FormItem
[Code]...
I've tried also validateNowand other similar methods. What I have here:
1. The HScrollBar is being added.
2. We increase a bit the width of container, so it disappears.
3. When it disappears, the validating throws the null-pointer exception when it tries to measure the non-existing scrollbar. I've also tried to add validateProperties before validation, but it didn't worked either.
State transitions in flex are very helpful. Is it possible to add an automatic state transition between state A and state B in case there is no user response for 5 mins in state A or pop-up an alert?
View 1 RepliesI have an editable datagrid. If sorting is applied by clicking any header of datagrid, it works fine. But after that, if data values are changed in any row of datagrid, sorting is applied automatically. How to prevent from this behaviour? i.e. sorting should only be applied if user clicks on any header of datagrid and sorting should not be applied when user modifies data in grid.
View 1 RepliesI'm trying out the Flex Builder 3 Plugin for Eclipse, and it doesn't seem to have quick fix or automatic imports. I use those two features a lot with Java and FDT. I've been googling, but all I've found is some plugin that someone wrote for Flex Builder 2, and no other mentions. Is Flex Builder supposed to have these features?
View 5 RepliesI'm learning layouts in Flex. I try to make the following layout.The red arrow means when enlarge the window, the red arrow widget will become large too. Can anyone implement this layout in Flex?
View 2 RepliesI need to develop a GUI for a self-service kiosk. The kiosk will take food orders (i.e pizza, burgers, salads) and provide the ability to pay using a credit card. Can anyone suggest the best GUI layout or approach? I want to make it intuitive and simple. I want to minimize the number of button clicks. If you can provide examples,
View 2 Replies[code]...
when i add this two elements label and button both are displayed on same position
my label size increases dynamically so i want to add that button below that label
here for titleWindow i want to set layout how i can do that[code]...
My flex application gets some parameters from URL when the application opens for the first time(ex: layout=<1,2,3,4> ). Based on layout(1,2,3,4) value I have to change the layout. However the problem is the application is already drawn(Layout is initialized) by the time the control reaches the point where it reads the values from the URL. I was wondering how can I redraw once I read the values from URL. Some thing like refresh.
View 1 RepliesI have a menu made in flash and I have mouse-over animations and whenever I create an invisible button to make a link, the links work, but the mouseover animation disappears. Anyone know how I can create links while retaining the animations?My FLA is located here: here
View 2 RepliesI have a .doc file. I want to load the text from that file into Flash. So I convert it into a .txt using a website like this one: http:[url]..... I add in the little code at the beginning (myTextField=) and then Flash loads it fine. The only problem is any marked up text (italics, bold, underline) is lost. Is there any way to prevent this from happening? Or for Flash to load text from something other than a .txt? Or to manually reinsert html tags to the .txt and get Flash to understand them? Or something else I'm not considering?
View 6 RepliesI have a .doc file. I want to load the text from that file into Flash. So I convert it into a .txt using a website like this one: [URL] I add in the little code at the beginning (myTextField=) and then Flash loads it fine. The only problem is any marked up text (italics, bold, underline) is lost. Is there any way to prevent this from happening? Or for Flash to load text from something other than a .txt? Or to manually reinsert html tags to the .txt and get Flash to understand them? Or something else I'm not considering?
My text field correctly displays the text in the "PrimaryText.txt" file. The first line of the text shows like this: <b>Testing this text</b> instead of just showing up bold. And the "Render text as HTML" is checked.
I have a movie where the user is able to type text into an input text field. The textfield itself is set to be left-aligned, but I provide the users with 2 buttons for alignment... left-align and center-align buttons. I have it so that if they click on one of the buttons, it sets a variable that stores the alignment with the one desired, and then calls a function that contains all of the textFormat code to display the text with this latest change. That works fine, to an extent....
When the movie is first started, the text is left aligned (as it shoudl be since the text field is set that way)... and then if I type in some text and then hit the 'center' button, it centers it like it should. Now here is where the problem is: If I go to add in more text before what is already there, or select some of the text and begin typing, it immediately left-aligns the text again. It would be annoying for the user to have to hit re-center the text again..and to make things worse, I have it so that when each button is pushed, it shows an 'on-state' ... so when it automatically left-aligns the text, the 'center' button is still active.
I am trying to manipulate (move up and down, enable/disable and launch a form) child controls inside a panel control. However I am unable to get the id of the child control on which the click event occurs. To illustrate, I am trying to create similar functionality as is available. I am trying to create the up-down buttons that you see in the image at http:[url].......
View 2 RepliesI have a flex application and have embedded a flash (SWF) file into it using <mx:SWFLoader>. There is an "Exit" button on the Flash file. I want to be able to handle the button click event on the flex application.
So when that button in the flash file is clicked, I want to perform an action in the parent flex application.
I just upgraded to CS4, and I'm trying to do a simple text-input/dynamic-text project. Here's everything in the project:
1. Input text box. Variable: "thisText". Text color: blue.
2. Dynamic text box. Variable: "intoThis".
3. Button called "button1".
And this is my ActionScript, applied to the first frame (not a symbol):
Code:
thisText="";
button1.onRelease = function () {
intoThis="before "+thisText+" after";
};
When I run it, I get my input text between "before" and "after", but the input text is still blue, and there's a line break between my input text and "after".
How do I stop it from saving the formatting of the input text and inserting a line break? I've done this in previous versions of Flash just fine, so I don't know what's going on here.
I've got it set up for Flash Player 10, ActionScript 2.
I have a menu made in flash and I have mouse-over animations and whenever I create an invisible button to make a link, the links work, but the mouseover animation disappears. Anyone know how I can create links while retaining the animations?
View 7 RepliesIs it possible to dynamically load a png (or psd) file at runtime and have access to it's layers as separate images within the program?
There are PNG encoder and decoder classes out there but as far as I'm aware they don't support layers.
I have a menu made in flash and I have mouse-over animations and whenever I create an invisible button to make a link, the links work, but the mouseover animation disappears.
View 2 RepliesI was modifying the layout of a Flex application in Flex Builder. What I didn't realize was that the changes I made, were made for a particular state. There are around 6-7 states in my application. Now, I need those changes to be made to all of those states. How do I do it? As of now there are multiple lines like this in one state :
<mx:SetProperty target="{accno}" name="x" value="116"/>
<mx:SetProperty target="{accno}" name="y" value="826"/>
<mx:SetProperty target="{phone}" name="x" value="116"/>
<mx:SetProperty target="{phone}" name="y" value="866"/>
I have a randomly-sized array of items. I'd like to display one label for each item in a Repeater component. I want them to display in a grid layout with 5 columns and as many rows as needed. How do I do that in Flex / ActionScript?
View 2 RepliesI have an mx:vbox and inside i have several mx:text elements.how do i decrease the gap between each line of text that is shown ?i tried doing the following:
<mx:VBox borderColor="black" borderStyle="inset" width="80%" verticalGap="0" paddingBottom="0" paddingTop="0">
<mx:Text text="a" width="80%" paddingBottom="0" paddingTop="0"/>
[code].....
In HTML/CSS, if you float items, DIV's that exceed the width of the container are moved down 1 line.
I would like to achieve this in FLEX. I have 3 components with variable width. I would like for the 3rd component to be moved down when it doesnt fit the container any more.
I need an horizontal layout on my forms, they look like this:
[Code]...
I'm very confused about the new Flex 4 architecture...
I'm trying to hide both the vertical and horizontal axis renderers in flex so I can take a picture of the chart without them.I've set both renders to visible = false and includeInLayout = false. They don't show up but they still take space. I've tried setting widths/heights to 0 and that doesn't help either.
<mx:horizontalAxisRenderers>
<mx:AxisRenderer
id="horizontalAxisRenderer"
axis="{dtAxis}"
[code]...
I have a list with tile layout,I have given the item renderer's width as 100%, but the item dosen't resize to fit the content . The same scenario works well for horizontal and vertical layout.
My code looks like this
<s:List width="{this.width}" dataProvider="{allActionsArrList}">
<s:layout>
<s:TileLayout />
[Code]....
Does anyone know of a simple way to implement a DividedBox layout similar to flex, but done through Flash/as3 ?
I would think there would be a library out there for that already, or some resources, but I'm having a hard time googling for it, as it;s either Flex or unrelated content I keep finding.
EDIT just came across yahoo's astra library (example)