Creating a simple video for embedding by importing a video into flash creates a separate swf for the controls. Is there a way to have the controls embedded in the main SWF, so you don't have to worry about paths to the control swf?
View 1 Replies
I have attached a video on a frame of my website in Flash. When I preview the movie the film plays as it should.But when I export the Fla. as a Swf. file it then doesn't have the movie there anymore?It does show this error:
**Warning** The linkage identifier 'FLVPlayback' was already assigned to the symbol 'Video/FLVPlayback', and cannot be assigned to the symbol 'FLVPlayback', since linkage identifiers must be unique.
I really don't know what that refers too.
I'm trying to control a Flash video player with external Javascript commands using 'ExternalInterface.addCallback' but I'm not having any success. Here is the HTML code:
[Code]...
I'm trying to control the video playback of a live video stream using ActionScript 3 code in Flash Professional.
There's a FLVPlayback component on my stage titled "flvPlayer", and in Frame one of my "Actions" layer, I have the following code:
import fl.video.FLVPlayback;
import flash.display.Sprite;
var vidURL:String = new String("rtmp://www.mycompanyserver.com/test/live/livestream");
[Code].....
I can get it to work by adding the source to the Compenent Parameters window, but I need to be able to access those parameters in code.
I have embedded a flv video into my timeline, it uses the flv playback component to play and the SteelExternalAll.swf skin. I would like to control this flv using buttons that I have created that are postioned next to the video player. Ideally, these buttons would be thumbnails, similar to chapter thumbnails on DVDs and would serve a very similar function. As these thumbnail buttons are always present, I want them to change while the movie plays, I think a border around the currently playing would suffice.
The video is nearly 3 mins long, I have made cue points from Sorenson Squeeze.
hope i'm explaining this the right way. i'm using the flash flvplayback component to play a video. i've stripped the audio from the flv and am playing it, along with another audio clip, on the timeline at the same time. volume has been set for both clips, but i need to allow people to adjust the volume from the volumeBar that exists inside the video player. it's built in as2.
View 1 RepliesI have developed a video player using Flash 8 Professional and the FLVPlayback component. Recently I have been testing a few 720p .mov files converted to FLV by FFMPEG running on an encoding server. I am noticing that these files do not play back in my video player. It appears that they do not have any audio attached to them but when I play them in Adobe Media Player the audio is there.
Is this due to the FLVPlayback component in Flash 8 not supporting HD videos? When I test locally the video picture plays with no sound but when I run in a browser the video freezes and does not play. The progress bar appears to move as if the video is playing however.
[Code].....
by following a tutorial on [URL], I was able to display a youtube video in flash, but the problem is that the video doesn't have a control menu. Just wondering if there is a way to make one, either it is customized or some default menu provided by youtube or flash.
View 0 RepliesWhat is the differences in use of these two objects? Which one should be used for a "Youtube-like" video player with a custom skin and playlist?
View 2 RepliesIs it possible to use the FLVPlayback class to play an instance of the Video class? I'm loading the video (which is just an audio track with cue points) in using GreenSocks LoaderMax (along with the rest of my assets) and so have various instances of Video. The FLVPlayback class only accepts a String as its' source. Is there any way to hack it to bypass whatever loading it does and just feed it the video directly?
View 1 RepliesI am wanting to play a number of movie clips and flash produced video clips. On the main timeline I have a frame for each clip I want to play. In that frame is a flash movie that contains the video that I have embedded onto the timeline for the movie. The filesize for this project is massive and I am struggling to work on the file. I want to be able to play the video files with the playback component in each of the frames where the video was.
[Code]...
I am using a FLVPlayback component.Is there a way to turn off the 'control bar'?
View 1 RepliesI was given an assignment to create and external video playlist using an xml file. I have never used flash before, know nothing about encoding and all that was given to the class in terms of instuctions was a short tutorial that has no resources for troubleshooting. We were given everything; the external playlist file equipped with the video skin, the video list, actionscript that loads the xml and the xml file. We were told that all we need to do is change the names of the videos in the xml file to match the names of our videos. I did that. We were also told we needed to "name target", but we were not informed on how to do this. I have tried everything, visited every tutorial and I cannot figure out how to get this damn thing to work. I cannot even get flash to load the xml file.
Here is the xml file:
<?xml version = "1.0" encoding = "i-8859-1"?>
<playlist><ADogWithoutABoneflvurl="ADogWithoutABone.flv"desc="Hyper Wall First Video" />
[Code].....
I tried placing the full address of the xml file in, along with the file address of the videos, but again it did nothing. Everything is located in the same file, and the videos in a sub file in that file. I tried taking out the sub file and putting all the videos in the same file, but it did nothing.
I was wondering if there was a way to get the sound from a FLVPlayback component and manipulate it with using a custom volume slider? Within my Actionscript I currently have this code which enables me to control the volume of a MP3:
import fl.events.SliderEvent;
var mysong = new music();
var myChannel:SoundChannel = new SoundChannel();
var myTransform = new SoundTransform();
myChannel = mysong.play(0,10);
[Code]...
But Instead of using the MP3 for sound, is there a way to use an FLV's sound instead?
does anyone know how to make the flvplayback control accessible? meaning to be able to use the tab key to navigate the play,stop,fwd,back buttons? According to Adobe I should be able to load up a skin and its already set.
"All skins provided by Flash CS4 Professional support keyboard and screen reader access, so developers simply insert the FLVPlayback component on the stage in Flash no configuration is needed."
This is incorrect. I have tried to load several different skins and it fails, my coworker tried with her system "fail" I've managed to create my own playback bar (sorta) and was able to get the tab to work by assigning tab indexs however the flvplayback skins does not allow tab indexing.
I cant actionscript worth a lick so using my playback bar is not an option and the SkinUnderAllNoFullscreen playback was the chosen controller. point me in the right direction. Adobe and the forums over there were of no help.
I am facing a weird issue while using FLVPlayback control.I have created a class which internally creates an instanceof the FLVPlayback control and sets the skin toSkinOverPlayStopSeekFullVol.swf.In the main program I have created n instances for this classto load different flv files [just like any multi windowedapplication, with each window playing its own flv file]. Once I click FullScreen button the video loaded last alwaysget in to full screen mode; irrespective of the
View 1 RepliesI'm trying to control the video playback of a live video stream using ActionScript 3 code in Flash Professional.
There's a FLVPlayback component on my stage titled "flvPlayer", and in Frame one of my "Actions" layer, I have the following code:
import fl.video.FLVPlayback;
import flash.display.Sprite;
var vidURL:String = new String("rtmp://www.mycompanyserver.com/test/live
[Code]....
I can get it to work by adding the source to the Compenent Parameters window, but I need to be able to access those parameters in code.
I have a FLVPlayback on my stage, but I want to use my own controls rather than the ones provided by the skin.I read that I can make my own skin - but have not been successful.
View 2 RepliesHow would I go about using an external video in which the video would scrub (or move forward or rewind) when the user clicks on an object and drags the object left or right? I want to make a site in which the user has control over the movie, and when they choose left or right, the video will scrub to a certain cue point. wants it hits that cue point, the video will seek to another cue point and the story will continue. I want to make it so when the user clicks on the person, and drags them, it scrubs through the video as if the person is walking in a certain direction. I think I have the cue points set up properly, now to just figure out the rest.
View 2 Replies[URL]. It says FlvPlayback control can support MP4, M4A, MOV, MP4V, 3GP, and 3G2 but none of these formats are actually played in FLVPLayback control.
View 6 RepliesI have an Adobe Air 2.5 app that has been written in Flash CS5.There is a need to play video's from within that app and I am not in the mood to write a video player from scratch. Soooooo... we attempted to use the FLVPlayer from http:[url].... but could not get the thing to work properly at all through their API.
The video player must go full screen and have the normal playhead scrubbing, play / pause / stop, and volume controls.Can you make the FLVPlayback control go fullscreen?
Is it possible to play SHOUTcast streams using the FLVPlayback control?
View 2 RepliesI'm trying to create a flash video that will incorporate powerpoint-like slides along with video footage. So for instance I will have slide 1 (graphic) - slide 2 (video clip) - slide 3 (text). I have used CS4 before for one of my classes but that was a little while ago, and I feel like I'm starting over again. When I import the first graphic (.png), is there an option to have it resize to fit the stage?
View 5 RepliesCreate a html video list that uses a flash video player?
View 14 RepliesI'm doing the exercises included in the book "ActionScript 3.0 for Adobe Flash CS4 Professional Classroom in a Book", but I have run into a problem I cannot solve regarding the use of the source property of the FLVPlayback component.
[Code]...
An error like this appears: "NetsStream.Play.StreamNotFound", saying that there is no video file there I also try with absolute paths, with slashes instead of backslashes..., and I just get to get it working if I copy this video file in the same folder in which lesson11_start.fla is, and enter "solution5.f4v".
We have a major project on here at the moment to do with flash menu designs and videos etc. Basicly we have a menu where u click a button and it jumps to a frame. On that frame is the information etc, and a video for that particular subject. What im asking is this: We have put the video in using FLVPlayback and was wondering if it is possbile to have the FLV loop the video.
View 12 RepliesI am trying to make a nice pretty video.I have a AVI video from a GOPro video camera, and I hae some info I want to overlay on top of the video. Like Time, GPS, Speed, G-Force etc.I got my raw data, and ActionScript coded it up into a Flash movie, but then worked out I have two issues.Flash export to AVI is pretty crap, and basically does a screen capture.The export to AVI cant be transparent or anything but spare/rectangle.Should I use something other than Flash to create my speedometer, that is more friendly for overlaying on a AVI?This is the sort of thing I am trying to create.
I have a CSV of all my raw data, and am trying to find a way to overlay it and look as professional as that link above. I can make the dials in actionscript, but then exporting to AVI with a 'screen capture' type program, they look pretty crap. But on the other hand, inporting my HD video info Flash, and it becomes pretty crap quality, and still have the export issue at the end.
Friends, I am developing a control panel for a web hosting company, I am considering using Adobe Flex 4 (Adobe Flash Builder), but I'm afraid that the staff are no longer using more flash in computers, especially with the growth of ipad, iphone without flash.
This panel will be used by enterprise customers to manage their products.
Do you think that the flash actually has a future? think it is reliable to use flash in such an application?
I am trying to use HTML to embed a flash video, however I encounter the following errors:
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text=" Error #2035: URL Not Found. URL: SkinOverPlaySeekStop.swf"] Here is my HTML code:
[Code]...
Whenever I open the page I'll get a popup window with the above errors and once I click "continue" it will go ahead and play the video, but without the control skin. how to get the skin to show up?
I have a HTML5 video with jquery hooking into the player like so: video.currentTime += 1; But when IE comes along and insists on using Flash plugins, none of my JQ will work - How am i supposed to control the video when Flash takes over from HTML5?
The player im falling back to is JQplayer as "player.swf"
