In main.swf I loaded file.swf as:
var loader:Loader = new Loader();
var request:URLRequest = new URLRequest("file.swf");
When main swf loaded in HTML with an absolute link like:[URL].. It reports 404 error loading failed of file.swf
Because it looks for file.swf at current web host.What's the best way to do this without hard code absolute url in main.swf?
if i embed 2 separated swf files in a html, how can i make them talk with each other? does it use javascript?
View 3 RepliesI'm trying to get a .swf (a game, with three total .swf files: main, title, game) onto my site and am having a problem. I understand how to actually do it and make it run (publish as HTML, copy/paste code in Dreamweaver, etc..), but my problem is having multiples .swf files and them not loading. When I embed code for one of the files, the page will play that .swf file and won't load the next .swf file (Main just contains a loader that loads title, Title will load the game .swf when prompted, Game will run). If I just 2x click the .swf files in my folder it will work, as will an .exe, but can I make it so each .swf file will play in HTML?
View 12 RepliesEverything is embedded in an HTML site. The HTML loads a preloader that then loads the actual flash movie. Inside this movie I created a few buttons, inside a scroll bar movie clip. I want the buttons to load a whole new movie inside the same html. The code I'm using in the button is simply:
on(release) {
loadMovie("new_movie.swf", 0);
}
The problem is that it works beautifully in the Flash movie tester but doesn't do anything when tested inside the browser, embedded in the HTML. I think the problem is that the HTML embeds as an object the first movie, the preloader for the menu movie, not the menu movie itself.
Following embed code is from [URL] but it doesn't work in Internet Explorer 8. Firefox no problems. Any recommendations for improvements?
[Code]....
UPDATE 2010-05-14: If I'm not mistaken HD.se uses Flowplayer and all those flasvars are for that. Perhaps someone here is good with Flowplayer? I've never used it myself.
the best way to do it but i have a preloader the loads an external swf that loads 2 external swf files. one on layer o and the other 1.it seems to load the swf on layer 1 twice.url...if i run the swf that loads the 2 external swf files by it's self and the same problem happens.mouse over the navagation button and then mouse over the close button and follow the animation down to were it turns back into the navagation button. sometimes the close stays up.if i run the swf file that just contains the navagation it dosen't happen.
View 2 Replieson (release){getURL("client.htm", "_self");}
my button script. it work well when test the flash but it doesn't work after embed in html or test in html.
need add some script into html to active the flash?
I am building an AS3 SWF player that loads other SWF files into it, both AS2 and AS3 files will be loaded (one at a time). In the case that it is an AS3 file then the main player SWF can directly call functions and variables inside the loaded AS3 file. Now to handle AS2 files I am using 2 Local Connection channels, one for the player to send info to the loaded SWF and one for the loaded SWF to send info to the player SWF.
Now i never have more than 1 SWF loaded into the player at a time and before i load the next SWF into the player i use..
[Code]...
I have a script that dynamically loads text from xml files. The only problem I have is to attach scrollbar to this dynamic text.. I've been trying to modify this scrollbar from flashmo (in attachment), but I didn't manage to do it...
View 2 RepliesI'm trying to create a SWF that loads a series of FLV files into an array, and then plays them randomly and seamlessly one after another in a continuous, random loop.
View 4 RepliesI've had Flash CS4 (a legally purchased single-user licence) since the day it came out and used it practically every day without any major problems. Today I opened it up to carry on with some work, and it crashed. I had a whole host of other stuff that was open and updating at the same time, so I waited until that was done, then I tried again. It crashed. So I rebooted, and tried again. It crashed. Slightly panicked, I uninstalled Flash CS4, rebooted, re-installed it, and tried again. It crashed. Panic giving way to anger, I googled the issue, and this time uninstalled, with 'Remove user preferences' checked, went through my Windows system and manually deleted any associated files in my Application Data folder, rebooted, reinstalled, rebooted, and tried again. It crashed.
I have now just downloaded the Adobe CS4 Cleanup utility and run it, but after twenty minutes hanging at the 'Removing all session folders' screen and no processor activity I could see, I quit the program. I'm tempted to try reinstalling again (obviously) but I'm pretty sure I know what's going to happen.Just so it's clear, here are a list of the variables involved:Registered single-user licence of Flash CS4, running without issue since 2008Windows XP SP3The Flash IDE opens fine on its own, but crashes when it tries to open ANY Flash fileI have CS4 installed on my laptop, and that can open the same files fineAny
just working on a website. Trying to load a simple swf movie into my mc holder. Problem is:When I preview the page on my desktop the external files loads. On the FTP server it doesn't. Why?I tried 2 scripts for an "onClipeEvent" on the empty mc holder but nothing workes.
[code]...
Then I got recommended to use this script on an empty keyframe. It works but again, only offline. targetMc.loadMovie("floorplans/301.swf");
So if I have a movie clip button, when that button is released I want it to load a html file into a MovieClip container, that container is named TutorialContainer...I also want the html to conform to the containers size and position.
View 3 RepliesI have a flash file which loads an XML file containing links to my photos.var listLoader:URLLoader = new URLLoader( new URLRequest("filelist.xml") );When I test out the Flash movie through Flash, there are no problems.When I place it in my index file, the XML file no longer loads. (just the swf)When I place the XML file in the same directory and the XML and swf files, it loads the images.[code]I've also changed the url in actionscript to:var listLoader:URLLoader = new URLLoader( new URLRequest("mediaflashfilelist.xml") );
View 1 Replieshave this flash xml menu that loads external swf files like this:
Code:
<item title="ABOUT"content_path="http://mysite.com/folder1/folder2/folder3/about.swf"target=""mo
[code]......
in a for loop I call an eventlistener function that loads xml files. But the for loop keeeps running without waiting for xml to load.What should I do to prevent that? I need for i=0 {load xml}and after xml is loaded go to next step, which is i=1.
View 8 RepliesI have been working in Flash CS3 now for a couple of months and action scripts have been a challenge for me. I have created a site that has 4 areas that play a looping swf file of images. I can get this to work no problem with a behavior for rollover, but what I am looking to do is have the 4 swf files automatically play when the page loads.
The swf file I want to play is really simple, just images of banners.
I need to make a preloader for a test project that is very diffirent and a little bit off-beat as it uses script that I have prostetuted from a variety of diffirent files, see[URL].. might take a while to load as it has no preloader and please note how it does load...), it scrolls the actual content of the site along the x axis in multiple speeds by using the following script 4 times for each layer/speed of content:
[Code]...
i am using this preloader to load load external swf files in my main.swf. it works great but it has a small issue regarding loading timing. when it gets to 100% and loads the external swf file the swf file as i suspect is loaded a little bit earlier than the % and when it shows up its already playing the 10th frame instead of the first frame. the code is below....
MovieClip.prototype.fadeIn = function() {
this.onEnterFrame = function() {
if (this._alpha<100) {
[code]....
how to i make a button so when i press it, it loads an external .txt files in my text box in flash
View 14 Repliesim trying to create an advert box that loads different files from urls contained in an external xml src. The code for the XML loading works well, but the rest of the code does not seem to work.
what im trying to archieve is:
1. get the list of urls from the XML file
2. trigger the loading of these files as soon as the xml file is loaded
3. loop among these files (5 in total), in a given period of time,
4. Each time they are loaded ,the loading bar should show the progress
here is my code
Code:
_root.start_load_advert = function() {
load_advert_int = setInterval(load_advert, 10000);
};
[Code].....
I need to allow users to preview audio files for purchasing. I have CF pages that return records form a SQL database. Each record contains the same swf file however, each swf file points to a different mp3 for previews of different audio examples. So far, everything is working fine. My problem is that I need to be able to stop the sound from one swf when I click to play a second swf .The only solutions I see in Flash forums deal with loaded swf files. These are not loaded files they are separate files within a page. The question is: How do control one swf from another swf in the same page.The following items have not worked: soundChannel.stop();,soundMixer.stopAll()
View 2 RepliesI'm trying to place html elements over a flash video which must be rendered with wmode="direct" (video occupies entire window with html UI to be laid over it, anything other than direct makes CPU usage surge).
I've tried using an iframe to include the flash video, but I'm still unable to place any elements over it. Is there a workaround to achieve this?
Update: Turns out this is undocumented behaviour of the NetStream class - NetStream loads relative to the swf, as opposed to URLRequest which loads relative to the HTML doc...annoying.I am having a strange issue where loading an FLV file using thefl.video.VideoPlayer class that comes with CS4: Adobe docs hereUsually when loading external content into flashplayer, the path is relative to the HTML page that the swf is embedded in - but when I try and load an FLV using the VideoPlayer class the player looks for a path relative to the swf, not to the HTML (as you would expect).
eg:
My file setup is:index.html (which contains the swf)swf/my-video-player.swfvideo/my-video.flv
[code].....
So I embedded a basic flash movie as per: [URL]
It loads fine in IE, but the flash player in Chrome cannot load the movie. Flash works fine on other sites in Chrome, so what's wrong with this HTML?
<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,40,0"
[Code].....
I have an html page with an .swf in it.when this page loads, i want it to play a certain section in my swf (which I have labelled).Is there a way for me to do this? using javascript?i.e. <body onload=( gotoandPlay (starthere) )
View 1 RepliesSo I'm making a Flash site that needs to have different swfs on a bunch of different html pages for easy linking purposes. The problem: Even though the swfs are small, as you navigate between pages there is what looks like a white flash just before the swf shows up. I know this is the background of the html page as the swf is loading. Is there any way to load the page in a certain way to avoid this? Would a preloader help? Here's an example of the site:
View 3 RepliesI am using a content loader through AS3 to load some images and then later pushed into an array. I have pushed my image file paths in to an array (arrayImages). But when the loader loads the images it doesn't load the images based on the order they are listed in the arrayImages, instead they were loaded based on their file sizes. Is there anyway that these can be loaded in the order they were pushed to the array? Below is the code that i use to load the images.
function funcLoadImages() {
for (var i:uint=0; i<arrayImages.length; i++) {
var ldrImageLoader:Loader=new Loader();
ldrImageLoader.load(new URLRequest(arrayImages[i]));ldrImageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE,pushLoadedImagetoAnotherArray);
}
}
i have created a plain text files loads from an external file. I am facing one problem which is the text does not load unless someone select the button. I will like the text to show as soon as someone enters the page
//Plain text files loads from an external file
var textLoader:URLLoader;function loadStory(evt:MouseEvent):void{
textLoader = new URLLoader();
[code]....
Without including swfobject.js can only swf files be loaded through html.And if so is there a common tag for all the browsers.
<object id="myMovieName" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000">
<param value="movie.swf" name="movie">
<param value="high" name="quality">
<param value="#FFFFFF" name="bgcolor">
[code]...