I have a problem with this code:[code]There are two overlapping objects on my stage: character_mc and vanish_mc. As soon as i start the scene [Ctrl+Enter] vanish_mc is VISUALLY removed. But the code still sees a collision somehow. How can i Entirely remove the object vanish_mc?
View 7 RepliesI seem to be running into some garbage collection issues. I'm making an RTS game with a side scrolling map. I have a "game" layer on the stage which scrolls left and right, all the troops, vehicles, bullets, etc are within this layer. If I scroll the game layer to the far side of the map from some tanks placed at the other end, the tanks disappear. I can only assume flash is "helpfully" removing objects it thinks are too far away form the action to be of use any more. I'd rather it didn't.
View 2 RepliesI use this piece of code to create some eyecandy of debree falling. When an object is destroyed i spawn some rubble and let is fly over the screen. But... when i use this a lot, slowdown is there and even when all the objects are gone the slowdown stays. The good old 50fps won't come back anymore
public function destroyBlock(xPos,yPos,nrObjects) {
for (var debree = 0; debree < nrObjects; debree++) {
debreeObject = new mc_ground();
[Code].....
currently i am removing objects when they reach the edge of the screen with
[Code].....
i understand this does not delete the object? without removing event listeners before removing the object the error log fills up, i believe its due to the stage isnt there after its removed. this makes me think that removechild does not delete the object? i will be creating and deleting many objects during runtime, and i dont want to slow down or use too much memory, how to properly free up the object
i created 5 pages, each of which contains several movie clips (text, graphics, forms, etc). There is one specific page however that contains autogenerated content via. sprites. If i happen to land on this page, the sprites will appear, but when i transition to another page, they are still there except for the non-sprite stuff (disappear). Im ripping my hair out on this one, i managed to get a few of the sprites to remove but some are still appearing. Below shows the layout of the one thats not being removed;
[Code]...
I have an AS2 swf that loads FLV videos into a FLVPlayback component and attaches a seekBar component. When the video stops I unload the seek bar from the screen and set the FLVPlayback.seekBar = null. When another video is to be played I set up the seek bar again by attaching the seekBar component to the stage and assigning FLVPlayback.seekBar = newSeekBarInstance.
[Code]...
What Im noticing is that sometimes the seek bar is removed from the screen and sometimes it isnt? I cant seem to notice any pattern here. Has anyone had similar problems? Do I need to force garbage collection?
I need to remove every object that is part of an array from the stage. What I have right now only removes one of the objects.
this.removeChild(enemyList.splice(0)[0]);
I've tried several variations of this with either the same result or an error. Also, what is the zero in hard brackets for? I haven't seen that in many tutorials/explanations, but when I take it out, I get all kinds of errors.
i am having a problem removing objects from the stage and their associated arrays. basically when a "shark" is added to stage i want all "cans" to be removed and i dont want any "cans" to be added until the shark has left.my problem comes as i dont want to keep using for loops as i already have two or three for "cans" alone and i heard thats not good for the code!
Code:
var canTimer:Timer=new Timer(2000);
canTimer.addEventListener(TimerEvent.TIMER, addCan);
canTimer.start();
[code]....
im not 100% sure were to put this in my code-i didnt really want to put it in a function of it's own as it would mean using another for loop?i get a output error when a shark is added like this:
Quote:
TypeError: Error #2007: Parameter child must be non-null.
at flash.display:isplayObjectContainer/contains()
at dolphinmoviegame_fla::MainTimeline/canHitTest()
even though all "cans" are removed.
I have a utility function:
function removeFromArray(item:Object, arr:Array):Object {
for(var i:uint = 0; i < arr.length; i++) {
if(item == arr
[Code]....
This function searches through an array and sees if an item exists in it, if it does, it removes it and returns a reference to that item.
This works fine for most things. But I just ran into a problem where I need to remove an array from an array.
so my array looks like this [ [item1a, item1b], [item2a, item2b] ]; and i need to remove [item1a, item1b] from it. But passing in the the array to remove and the full array to remove it from does not work because i guess of the casting to an object in the parameters list. Can the functionality i want be used? if so how?
i don't understand why none of my display objects are not being removed. when i press the button, i'm expecting a trace and removal of both shapes and the button, but nothing happens:
[Code]...
i realize there are better ways of accomplishing this, but i'm learning and therefore only interested in why the above code doesn't work.
I have made a class that creates a dotted line following a moving object. The dotted line is small circle added to the stage (and to an array) every half a second at the object's position.
First I add the circles to the stage, when the object stops moving I remove them from the stage.
This, however, only works twice, after that it throws a "display object must be a child of the caller" warning.
ActionScript Code:
public class Path extends MovieClip {
var tInterval:Timer=new Timer(50,500);
var pathArray:Array=new Array ;
[Code].....
I'm making a banner rotator that reads image urls from an xml file and adds them to a sprite on the stage, then tweens them into position. Here's the relevant code:
[CODE]....
I have a question about how best to remove display objects.removeChild(object);Given that there are no other reference to this object, does using removeChild alone make the object eligible for garbage collection, or does it also need to be given a null value as well?[code]In both these cases, I get the classic 1009 error. That leads me to believe that if you use removeChild, you don't also need to give the object a null value.?url...
View 2 RepliesI've created a navigation system using Flash 3D functionality. It consists of a MovieClip with a rounded rectangle + a text with no-antialias bitmap font. I'm using Tweener to modify the z co-ordinates of the mc to make it "slide onto" the stage. However when the mc is completed animating it is notably blurry (the text at least). I was wondering if it might just be because it's in 3D-space the perspective (which hasn't been modified) is throwing the rendering off. So onComplete of the animation I try assigning null to the z-value in hopes of removing the item from the 3D space. I've attached the package code I'm using to create and animate the navigation feature.
View 1 RepliesI was just wondering--and it's probably an obvious question really--if I make an object null and that object had one or more event listeners registered, are the listeners removed?
for example:
Actionscript Code:
object.addEventListener(Event.SOME_EVENT,callBack);
function callBack(evt:Event):void
{
object = null;
[Code].....
In this case have I removed 'object''s listener when I made the object null?
I have an animation of footprints being left on the ground as if by an invisible man or ghost. the animation consists of:
1 movieclip containing --> 5 footprints each one is an individual movieclip. Each print fades in and out using the Tween class with an alpha effect
The main timeline uses the following code to create random instances of the animation:
var myTimer:Timer = new Timer(12000);
myTimer.addEventListener("timer", timedFunction);
myTimer.start();
[Code].....
so it looks like the function is being called correctly and removing the first instance of FOOT from the stage. but the 2nd iteration generates the error. Is this is a problem with the timer? I would like to send this to someone for examination and assistance.
I'm trying to make a Starfield program as practice for ActionScript 3. I'm using a timer event in the document class to create Star objects which are defined by an object class connected to the movieclip Star in the Library. The object class has a timer as well, and at each tick it repositions itself a few points away and scales up, creating the image of a star shooting towards the sides of the stage. When the star has gone past the boundaries of the stage or when it has scaled to a certain size, it removes itself from the display list with the command: this.parent. removeChild(this);This removes the star from the display list just fine, however after that I can't get the star to set itself to null so that it will be removed from memory, and I'd like some suggestions on how to do this properly. An idea I had was to make a function in the document class that the child objects can call, something like this.parent.KillMe(this) which would give itself as a reference to the function, which could then use a local variable reference to set the child to null, removing it from memory. This all seems terribly complex, so I'm sure there's another way.
I haven't noticed a memory leak or slowdown, however, so I'm curious if objects without references that are removed from the display list are automatically removed? That could be both good and bad, as the object might want to add itself to the display list again at a later time; not in this Starfield program, but perhaps in another I write.
I'm moving two objects accross the stage at different rates using the same function:
Code:
function moveClip(clip,speed){
clip.addEventListener(Event.ENTER_FRAME,moveIt);
function moveIt(event:Event) {
[Code]....
In AS2 I'd just use dot notation as above and it would work from anywhere or perhaps _root.red....
I've tried root. stage. childbyname Not sure where to from here.
I am trying to add some Sprite objects as the contents of an array, and I would like to be able to "clear" them from the stage. I would assume that if there are loaders involved, I need to do
_imgArray[i].close();
_imgArray[i].unload();
And if I am using a sprite, I can do:
removeChild(_imgArray[i]);
None of the above work.
Currently I try:
for(i = 0; i < _localXML.length(); i++) {
var tmp:BMLink = new BMLink(_localXML[i], _bw, _bh, i);
_imgArray[i] = tmp;
_imgArray[i].x = (_bw + _mainpad) * i;
_base.addChild(_imgArray[i]);
But this doesn't work.
The class instances that are populating the array are all extending sprite, but they have their own individual loaders inside w/ progress events etc.
I've got an array of coins, which are called within the array coin1, coin2, coin3, coin4 etc. I'm trying to reference them to say if the character hits coin 2, then coin2 will disappear. Here's my array (so far):
ActionScript Code:
var coinArray:Array = [coin1, coin2]; //an array which contains all of the coins
And here's the script I'm working on:
ActionScript Code:
function coinCollect(evt:Event){
if (collisionTest (character, coin/*[n]*/){
var i:int = /*the number from coin[n]*/ - 1
remove coinArray[i]
}}
But I'm missing some major things, mainly how to reference which coin has been hit, and how to take the number from that coin and take 1 from it to reference it's correct position in the array? (the code in /* */ tags represents things I'm not sure on the code of).
Im creating a game. When the current game has finished, I thinking to do this:
removeChild(game)
game = null
then
game = new Game()
Doing this way, it automatically removes the games object instances? It automatically removes the games object instances events? That would be an easy way to restart the game, if yes for both questions.
Can I do like that, or I have to remove all objects and events manually?
After adding an image to the stage, turning it into a Movie clip, and setting linkage in library to Export for Actionscript, I'm now using a timer to add a bunch of roses to the stage as a video plays.How can I get rid of all these clips once the video is over?Do I need to add all of them into an extra container and then just removeChild that container at the end? Or do I need to use something like getNumberOfChildren and then create a loop that removes them one by one?The clips (myRose) are fairly small and do not have any event listeners added to them. I just use TweenMax to move them from top to bottom of the screen.
public function roseTimer():void
{
MonsterDebugger.trace(this, "in roseTimer");[code]......
Is this at all possible? I just finished re-building my entire portfolio site in AS3 because I can't change the frame rate for loaded content in AS2. Now I find out after completely rebuilding this thing that AS2 content gets stuck in Flash Player 9's memory and won't erase on Loader.unload. All my work from years back is in AS2.
View 0 RepliesI've asked this question before but had no answers... so here I go again I have a structure of objects: Top object A has as children (addChild children that is...) one or more objects B_1 to B_n. The B_n may in turn have one (1) associated object A' (Same type as top object, not displayed to begin with). When I click a B_n two things may happen:
1. If it has as associated object a A', put it on the stage (as child to B_n).
2. Otherwise it is a leaf and it does other things.
If '2' happens I want to collapse the tree, that is remove the top and all children of same type from being displayed. I thought a recursive approach should work:
[Code]....
So a small example of my situation...On my stage I have 5 items labeled item1_mc, item2_mc, item3_mc and so forth...they all have two keyframes on their respective timelines, one labeled "active" and the other "inactive". My code contains 2 arrays, inactiveArray and activeArray and a variable known as energy that regularly goes to and from 0 - 100.
What I am looking to achieve is basically the function of...
if energy >= "insert given items 'active threshold' 20, 40, 60, etc..." then add it to the activeArray, if it is not, remove it and add it to the inactive array.
all objects in activeArray gotoAndStop("active");
all objects in inactiveArray gotoAndStop("inactive");
I have tried many different ways of achieving this effect but I always end up with duplicates and extras or something doesn't move when it's supposed to, where it's supposed to, it just ends up into a giant cluttered mess and I start from scratch.
I have a movieclip which contains other movieclips/loader. Does removing the parent movieclip removes all the children objects?
View 5 RepliesI commented my code below to reflect what I am attempting to do here. Flash is throwing me a 1084 error at the moment but I cannot spot my issue. I expect that it is something to do with the this['circle'+i] statement.
var boxOne = new box();
stage.addChild(boxOne);
boxOne.x = stage.stageWidth/2;
[Code]....
I'm new with strings and arrays. I want script to calling display objects to the stage and the timer to move images up and down to appear like a scrolling numbers. I start getting sloppy, and mess up passing to Tweener.
- An explanation or strategy may be enough, "I've got pretty close on this one"
- There was confusion regarding the Containers and addChildren...looked like arrays
The code "get as far as error with NumbersView and numbers undefined etc".
import flash.display.DisplayObject;
import flash.display.MovieClip;
import flash.utils.Dictionary;
import flash.events.Event;
import caurina.transitions.Tweener;
[Code] .....
The methods were proved separately. "I got a earlier version of the document going, but I need to work through this to understand it."
Symbol Properties
Class ImageView
Tweener
The "caurina" folder needs to be present
Rolling Numbers "Success loading numbers and connecting to counter".
Placed the movie clip object on stage with two dynamic text fields in it. Make sure the container is placed on stage, has the two text fields in it, and everything is given a proper instance name. Also include the caurina folder.
Seconds MovieClip symbol with instance name of seconds
firstDigit Dynamic text field with instance name of firstDigit, placed in seconds
secondDigit Dynamic text field with instance name of secondDigit, placed in seconds
Symbol
Un-tick 'Export for ActionScript'
Use 'Name, Class, and Instance' correctly
I have a little problem with counting all elements on stage. Flash, unfortunately is counting all objects on the stage without drawn objects (all shapes, including drawing objects, rectangles etc) all missed. Is there any way to count them?
View 2 RepliesI'm getting a very frustrating error in my flash project. I have a button on stage. When I try to trace it, it returns NULL. But when I change the button to a MovieClip in the properties panel, it traces it just fine as a MovieClip object.
View 1 Replies