Im struggling to get anywhere with this which i assume is simple :swhen i enter a page it rolls in with a animation, and when i press any other main nav button it rolls out (reversed animation) of current page and then plays (rolls in) with the new page.Ive got all my buttons going to relevant pages but not sure about the reverse animation bit ?
View 1 Repliesi've been trying to code a small variation into the normal roll over roll out animations... i want the animation to stay on the last frame once i click the button. but when i put the code in it dosent even bother playing the rollover/out animations it just goes to the end frame...
Code:
stop();
this.onEnterFrame = function(){
if(rewind == true){
prevFrame();
[code]....
Im trying to get a movieClip to change its tint on roll over and back to normal on roll out. But this has to happen gradually like a tween. Im trying to use the code for alpha tween but its not exectly i also tried the tweenlite but im to confused :S here is my code:
[Code]...
I want to create a button that toggles but has a roll over, roll out and click animation. Anyone willing to point me in the direction I need to be so that I can achieve this. I can create the roll over and roll out animation for the buttons but then how could I toggle between the two buttons. Ultimately this is for a start and stop situation. I want when I roll over the button for it to have a transition then click and it toggles to the alternate button with animation. I have been tackling this now for a week and with no success. So far I have found ways to toggle but loose the animation or vice verse.
View 4 RepliesSo I have a menu that fades in on a movie clip rollover. It fades out when the mouse rolls out over a 'hit area' mc. All is working fine except when you move fast off the hit area. Sometimes the fade in menu remains up when the mouse should have traveled over the hit area and told it to fade out... any reccomendations to remedy this?
View 3 RepliesButton class:
[Code]...
The Roll Over and Roll Out State isn't working.
make a roll over and roll out? with roll out appear image and with roll over disable
[Code]...
I have MovieClip A on stage, that when the user rolls over it another MovieClip (B) is added above it to the stage (it's not added as a child of Movieclip A). Now, when the user rolls over this newly added clip, it triggers the roll out event of the clip 'below' it. So, how can I prevent this from happening ?Basically, it's a movieclip that displays a button when rolled over and hides it when rolled out. I need the roll out NOT to be triggered when the user rolls over movieclip B.
View 6 RepliesI just want to design a button when the mouse roll over the button will gradually become larger (to a fixed size) and gradually comes to the originally size when roll out. I try to use "Adding Buttons to Movie Clips" method, ie, one MC with two layers, an amimation MC (tween from small to big and then big to small) and a button. Add script as follows:
on the first frame:
if (Playing eq "True") {
play ();
} else {[code]....
When I roll over the MC tween small to big and big to small and when roll out the MC gradually small. What I want is when I roll over the MC tween small to big and keep it is except when I roll out.
I have a graphic that when rolled over it starts a movie clip, when rolled out or off I would like the clip to instead of stop actually roll the movie back whether the clip is at the end or not. Like an animated button I would guess.
View 1 Replieson (rollOver) { gotoAndPlay(2);}on (releaseOutside, rollOut) { gotoAndPlay(11);}
i am using this this scrip in flash 8 scrip 2
and i want to use in flashcs5 script3
I want to be able to make a movie clip (that acts as a button) so the roll over effect finishes before the roll off effect is triggered. Like if a marker circles a button, i want the circling animation to stop before the roll off effects happens. Anyone know how to do this.
View 2 RepliesI have two buttons in my flex app next to each other, ButtonA and ButtonB. When the user does a mouse roll-over on any of the two buttons, I want the roll-over skin (overSkin) to show on both buttons, i.e. Button A and Button B. I tried to do it using this when user rolled over Button B:
ButtonA.dispatchEvent(new MouseEvent(MouseEvent.ROLL_OVER));
and then when the user rolled out of Button B I do:
ButtonA.dispatchEvent(new MouseEvent(MouseEvent.ROLL_OUT));
Button I cannot do the same on Button A when the user rolls in/out. It causes an infinite loop resulting in stack overflow.
I want to be able to make a movie clip (that acts as a button) so the roll over effect finishes before the roll off effect is triggered. Like if a marker circles a button, i want the circling animation to stop before the roll off effects happens. Anyone know how to do this.
View 2 RepliesI have basic movie clips, On roll over, show arrows [NEXT, PREVIOUS] on movie clip [they then show other images inside movie clips]I can show arrows on roll over.But when i roll over the arrows the main ROLLOUT function gets called, the arrows hide. I've tried several flagging methods and have resulted in using a larger invisible border around the clip, rolling over that hides them.
View 1 RepliesI have 3 buttons going around in a circle, in the middle of this circle I want a specific image to fade in for each button when you roll across it then fade out when you move off the button. I also want the button itself to change colour slightly when you roll across it. I've not had much look so far without the use of actionscript, but even with using it I'm not getting very far, I also seem to have a problem where once I have an image appear on the rollover of abutton that the image becomes part of the button, ie instead of the image just appearin when you roll over the button it appears when you roll over where the image should be appearing.
View 1 RepliesI am trying to use a rollover or a click effect on a button placed in a time line. The button is in a different layer to the running time line. When I go in to up, over down, hit and insert a new frame there when the movie runs the button just flicks back and forwards continually.
How can I get the button to switch over only when I roll over or click it?
I have 10 square color movieclips and I want whe rollover on one another 3 kinda rollover too and do this for all the movies clips. When rollover on b1 i want the b2 b3 and b4 to appear darker too. When roll over on b2 I want the b1 b3 and b4 roll over darker too.
View 2 Repliescreating a roll-over effect where he sprinkles dust from his fingers (As in, he actually moves his fingers and dust falls)?
View 1 RepliesOKay, I have a drop down menu. Around the menu I have a button surrounding the outside, so when I roll away from the drop down menu and roll over the outline button, it is coded with action script to make the drop down menu fade away.
View 6 Repliescan some body can past action script 3 of roll out and image appears and on roll over image go away or go to fram ecc..
View 2 RepliesI would like to display an items description when you "roll over" the item with the mouse (you know how a little box pops up under the mouse icon). Is there a way to do this?
View 1 RepliesI'm getting a flickering issue with my too tip hovers. I've tried writing the code in 2 different ways and I'm still getting the same thing! Each way seems to work fine if there's only one object, but when there are more than one and you start moving the mouse between the 2 this really annoying flickering keeps occurring? My file needs to have several objects which all overlap. I've tried altering the hit areas so that they don't actually touch - but no effect.I've also tried swapping ROLL_OVER for MOUSE_OVER and MOUSE_MOVE but all with no results!
View 3 RepliesI have no experience with AS3 at all. I know exactly what I want to do in AS2. I simply want a user to roll over ObjectA and it will turn ObjectB's alpha to 100 so it is visible, and when rolled out it will turn invisible again.[code]Could someone please tell me what I would write to get this to happen in AS3? I understand I would need to put the script on a frame rather than on a button, but I just don't understand what I need to write exactly.
View 2 RepliesI have 10 square color movieclips and I want whe rollover on one another 3 kinda rollover too and do this for all the movies clips.When rollover on b1 i want the b2 b3 and b4 to appear darker too. When roll over on b2 I want the b1 b3 and b4 roll over darker too.
View 1 RepliesI am loading products from XML in Roll Over ,A movie clip appears I m trying to display Description , Price & Link in a MovieClip when I move to that movieClip , as it moves away from image(on which roll-over was trigrred ) my description movieClip gone
[Code]...
below is an example of my code. ! the mc only tweens once. why?the myVar traces correctly on every roll over. but the mc only tweens on the first roll over.
import mx.transitions.Tween;
import mx.transitions.easing.*;
var myVar:Number = (mc._x + 35);
[code]....
I'm getting a flickering issue with my tool tip hovers. I've tried setting up the code in 2 different ways and I'm still getting the same thing! Each way seems to work fine if there's only one object, but when there's more than one and you start moving the mouse between the 2 this really annoying flickering keeps occurring? My file needs to have several objects which all overlap. I've tried altering the hit areas so that they don't actually touch - but no effect.
I've also tried swapping ROLL_OVER for MOUSE_OVER and MOUSE_MOVE but all with no results.. Please could anyone show me or point me in the right direction as to the best way to do something like this? I'm going crazy with it!
scroll through some cards on roll over...
mc.onRollOver = function():Void {
current = this.cid+1;
rolledOver = true;
[code]....
Im trying to make a website and i would like to include some flash. What im trying to do at the moment (but failing misserably) is to make a roll over box that as you roll over the image changes to text (that part i get) but i want the text to be dynamic so that it can be updated from a seperate text document. I have found this but its works when pressing on buttons. but i want the dynamic text to be there when you roll over the box changing hte image to text.[code]
View 2 Replies