I'm picking up where someone else left off, and I don't know the first thing about Action scripts or PHP. I have a flash form (Name, Email, Subject, Message) and I want to add a checkbox for "Add me to your mailing list" I've tried to break it down and logically figure it out, but no such luck, guess I'm not that smart.
[Code]....
I am trying to add a checkbox to the form that has to be checked before the send button becomes active. Like (I Agree).The code for the whole form is already in place. I just need a couple of lines of AS, on the first frame, to keep the "Send" button from working until the checkbox is clicked.
View 4 RepliesI got this:- I created a form mailer .fla and Im using php (loadVariables("action.php", OST");- everything works great, if I embed the swf into html.My problem:- I created a main .fla, where Im using a container for the form mailer .swf- in this case, the action.php file (residing in the same folder with the .swf files) doesnt compile anymore, so, mails wont be sent.
View 1 Replies have been trying to make a form mailer in flash.The form mailer for me is provided by [URL] it gives me the codes to send stuff from my web site to my email.This is the code that formbuddy has given me
<form action="http://www.formbuddy.com/cgi-bin/form.pl" method="post">
<input type="hidden" name="username" value="USERNAME">
<input type="hidden" name="reqd" value="1,2,3,4">
<input type="hidden" name="url" value="URL">
the USERNAME value is for me to add my formbuddy username after i have signed up with [URL] .Now my problem is that i dont know how to put the hidden fields in flash, especially the <input type="hidden" name="username" value="USERNAME">. So how do i do it? And yes, i have seen all the tutorials they have here about the form mailers. I also tryed to put the the hidden fields has variables in flash which again did'nt work....
I have a mailing form and i am trying to add a line of code in the php and flash to detect the ip address of the ppl sending an email to me. I don't know anything about php
View 2 RepliesI followed this tutorial for a form mailerHowever when I try to load this from my main swf into a movie clip holder, it no longer works. It only wants to work by itself, im a novice at flash/actionscript but im wondering if this is causing the problem by trying to get to the root of my main movie instead of the actual mailer.swf?
onClipEvent(data){
_root.nextFrame();
}
I am converting an html form to a flash form. I am not so good with AS3 and it's the first time I have to create forms so it was quite difficult for me. I am almost done, I did the text fields and the comboboxes, so everything except the checkboxes works.
Here's the html code for the 5 checkboxes;
...<input type="checkbox" name="txtMessage" value="Find Your Pace">...
...<input type="checkbox" name="txtMessage" value="Stress Escape">...
...<input type="checkbox" name="txtMessage" value="Time Revolution">...
...<input type="checkbox" name="txtMessage" value="Ultimate Connections">...
...<input type="checkbox" name="txtMessage" value="Contact Me About Life Coaching">...
Here's an example of how my flash form works;
var variables:URLVariables = new URLVariables();
var varSend:URLRequest = new URLRequest("website");
var varLoader:URLLoader = new URLLoader;
varSend.method = URLRequestMethod.POST;
varSend.data = variables;
[Code] .....
I am trying to use checkbox in a contact form (mail sign up) with php. I managed successfully to read the name and email from the form but struggling to extract information from checkbox. I have 4 checkbox options. They are store location. So user can select Location 1 and/or Location 2 etc... (up to 5). How to extract the data from these checkbox and make them available to be sent via php?
View 2 RepliesI can't change the name of the checkbox into this form. I need to change the names. I enclose them the form. [URL]
View 1 RepliesI can't seem to get the proper script to get a checkbox working for a form
View 2 RepliesAttached is one form fla in AS 2. There are some input fields and one check box. the name of the check box is "Terms and Conditions"What I like to do is to check the check box as an acceptance of the ""Terms and Conditions" and then the user can fire the mail form. And at the same time the received mail will reflect that the user is checked the check box ( Say Checked = yes, Not Checked = no). I could not solve the same . how can I do this .Below is the php code which I want to modify and use with my mail form.
Code:
<?php
if ($_POST)
{
$mailTo = "CyanBlue@FlashVacuum.com";
[code]....
This PHP contact form works well and is very simple. I have one checkbox in the fla file. However, it keeps displaying 'No' in the email message field, whether the checkbox is selected or not. It should display 'Yes' if the checkbox is selected, and 'No' if the checkbox is unselected.Here is the PHP:
PHP Code:/DESTINATION--------------------------
$destination="***@***.com";
//-------------------------[code]....
i also tried with leaving the == true off - adds to zero The code files are at [URL]
New Code
Code:
substance.text = myVars.substance;
sum.text= myVars.sum;
score.text = Score;
[Code].....
Code:
if (my_CheckBox.selected == true) {
My_ComboBox.addItem({data:01, label:"My_Label"});
Problem is this add that item unlimited time. How can i add it only one time?
I'm creating my first Flash website using AS3, and it's really basic. I would like to put in a contact form, which I have made. I've converted the 3 fields (name_field, email_field and message_field) to a symbol (movie) called 'form'. I've also got a send button, which is called send_btn.
I've set up the Action Script so that when the button is clicked, the user is taken to a confirmation-style page. All I want to do is called a php script (I'm comfortable with the code for that) called 'mailer.php' and send the three variables from the form to it before then loading the confirmation page.
[Code]...
I used Flash-Based Email Form Using PHP by Senocular and I have a problem with Polish characters (eg. ‚, …, ™, ‡, ¼, etc). I can type them in the form but when I read the email after sending it to my mailbox the email appears with strange, unreadable marks.I have tried putting some code in the email.php like:[code]I was reading on the Internet about converting / setting charset in Flash or php (eg. I System.useCodepage=true; iconv etc�) before sending the email but I do not know exactly how it should be done.
View 1 RepliesI am working a flash app that will display a block of text into a dynamic text field when a checkbox is clicked on. I have been looking around for this kind of thing but to no avail. I currently have the checkbox nested within two movieclips and need it to display the block of text upon click event in a dynamic text field that is found on the main timeline in its own layer. Ideally I would like the block of text to appear where the text curser is currently in the dynamic text field. I plan to have a lot of checkboxes each containing their own block of text to display.
View 0 Repliesi also tried with leaving the == true off - adds to zero The code files are at [URL]
New Code
Code:
substance.text = myVars.substance;
sum.text= myVars.sum;
score.text = Score;
[Code].....
How to enable CheckBox inside an Flex Advanced Datagrid.
View 1 RepliesI am using datagrid and added 3 columns to it in flex project. Data is provided to each column by using itemrenderer. Itemrenderer is checkbox for each column. Name of columns are col1,col2,col3. I want to make the checkbox in col1 selected when i selects the checkbox in col2. But i am not able to do this.
View 1 RepliesI need a datagrid, which contains checkbox (4 no's) without multiple selection. And I also need a text area which should contain the selected checkbox's label/data. I tried using arraycollection but I am not getting.
View 2 RepliesI got a flash form going on and all the tutorials I've seen explain how to code the text fields and text areas but nothing about checkboxes. I have no idea how to code for the checkboxes that I'm using in the form. Here are a couple of screen shots for the code and the form
View 8 RepliesI followed the contact form tutorial and it works perfectly. However, I would like to add error messages so that the user is prompted to enter information in a blank field. I followed a tutorial from this site to figure out the code (I am very new to actionscript).I've entered the if and else statements in to the code. My problem is that if when I test the file if a field is blank it will bring up the necessary error message but it will still send the email and when it goes to the success frame, the error message is still on the pageke a look at my code and let me know what I'm doing wrong?
Code: Select allstop();
var senderLoad:LoadVars = new LoadVars();
var receiveLoad:LoadVars = new LoadVars();
[code].....
I'm completely new to programming in PHP. I finally got the Flash/ PHP mailer working as demonstrated on this site ([URL]). Now I'm just trying to figure out how to block out blank forms... and possibly do email verification.
[Code]...
I have a super involved and somewhat silly site I've been working on for a long time piecing together fragments of AS2 code and modifying them to the best of my limited ability.The site is here:http:[url]....I am finally adding the last steps, a series of contact forms with a PHP script in the back end. Anyway, I implemented a form script and have it triggered by clicking the "CONTACT" button you can see on the lower bar. So, click contact and once the form opens (an external SWF loaded into an MC), type away and everything works fine unless you use the letter "f" in either upper or lowercase. It causes the screen to flash and for the form input to lose focus.It works (in that you can enter everything normally -- the form doesn't function, but that's just the PHP which I have yet to edit.)
View 0 RepliesI have a qtwebkit browser with Mozilla NPAPI plugins from which I access a web page. This page contains flash forms and I need to be able to access and manipulate its elements. Does anyone knows if this is possible and how?
PS: I don't want to use flash's ExternalInterface
I was following 1 of the flash tutorials about creating a flash form and using .php to send the form to myself.I've followed all the instructions but upon uploading, the file just doesn't seem to work. I hope to have some kind of form in my new website.
View 4 RepliesI have an online form in flash that when filled out, sends a variable containing the whole message to my PHP mailer (which in turn mails it to me).
Is there a way (at the ActionScript end) that I can instruct the mailer to send the highlighted fields in Bold.[code]...
I am trying to create a simple form using Actionscript 3 that will collect data from a form, then pass that data to an asp file. I have attached the following code to the submit button,but this is not working.I'm not sure if I have to add anything else and I don't understand why this is not working. I'm trying to load all the variable info into one variable called email form.
submit_btn.onRelease = function() {
var emailform:text;
emailform.email_txt = email_txt.text;[code]......
I have a flash form that need to submit values to a PHP file.I am using in flash: varsToSend.send("subsrcibe.php","process","POST"); The "subsrcibe.php" contains a form that is connected directly to a database.What i want to do is, to load the variables from Flash to this PHP file, and then submit them automatically to the database (The PHP page should not open to the users).
View 2 Replies