ActionScript 3.0 :: Send A "bold" Instruction To A PHP Server Mailer?

Feb 14, 2011

I have an online form in flash that when filled out, sends a variable containing the whole message to my PHP mailer (which in turn mails it to me).

Is there a way (at the ActionScript end) that I can instruct the mailer to send the highlighted fields in Bold.[code]...

View 1 Replies


Similar Posts:


Actionscript 2.0 :: Mousover - Send An Instruction From One MC To Another?

Oct 6, 2010

I have done a very basic flash navigation using on rollover within movieclips that make them fade in or out when you roll over. Here: http:[url].......My client has asked that when you roll over another button the current page button fades out. This should be straight forward but I have forgotten how to send an instruction from one MC to another. This is the code I have applied to an invisible button within the mc

Code: Select allon (rollOver)[code]........

So instead I need all other buttons on (rollOver) { gotoAndPlay("over"); to have another line in the same mc to make home button mc gotoAndPlay("out") then reverse on rollout.I have a different nav bar for each page.

View 2 Replies

Media Server :: Fmsadmin Illegal Instruction?

Sep 6, 2010

I'm having a problem with Adobe Flash Media Server 3.5.4 (Developer) default install ldd` showed me some missing libs, but I was able to overcome that server` runs fine, but I can't run `fmsadmin I'm using Debian 5.0.6 on VPS Here is some debug info I was able to get:
 
srv:/opt/adobe/fms# gdb fmsadmin GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later [URL].. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.  Type "show copying" and "show warranty" for details.This GDB was configured as "i486-linux-gnu" (no debugging symbols found)

[Code]...

View 5 Replies

Media Server :: Shareobject.send() - Send Method Does Not Work

Mar 18, 2010

I have a problem with shareobject. the Send method does not work. I work with AS3 My code

[Code]....

View 4 Replies

ActionScript 3.0 :: HtmlText - Text Shows Up Bold Instead Of Just The Few Lines Assigned The Bold Tag To

May 4, 2011

I have a dynamic text box for 3 lines of text. I styled part of the text to be bold and part of it to be regular. When i click on the button to display the text it looks right the first time but if i click on it a second time then all of the text shows up bold instead of just the few lines i assigned the bold tag to.

View 18 Replies

Media Server :: Receive Stream.send Commands On Server-side?

Nov 12, 2010

I am recording a video and while recording I issue some NetStream.send("doSomething", params) commands from client side. When I am playing back this video I receive the doSomething events on client side. No problems so far.Can I receive those events on server side? I want to handle those events on server side. Not client side.

View 2 Replies

ActionScript 3.0 :: Wait For Data - Send A 3 Byte Message To The Server (C) And Have The Server Return A Response?

Dec 17, 2010

I made a server connection with AC3 and C, I need the client(AC3) to be able to send a 3 byte message to the server (C) and have the server return a resopnse. So far everything works except for the fact that the feedback isn't fast enough becuase AC3 just tests for data once and moves on instead of waiting like in C. I'm using a binary socket at the moment but I was wondering if there was any way to wait for new data before moving on

View 2 Replies

Actionscript 3 :: Server Library API To Send Request To Server From Flash

Jul 22, 2011

I want to write application for facebook and vkontakte, which will consist of such main blocks as: SocialNetworkAPI (which include all work dedicated to social networks: posting to wall, get all user's info) and ServerAPI (which will send HTTP POST requests to my Java based server and receive data from there in JSON).

I am looking now to Adobe flash URLLoader

is there any good ServerAPI libraries, which I can use or rework to prevent rewriting standart code lines.

View 2 Replies

Embed "bold" Versions Of Verdana To Make Bold With AS?

Sep 14, 2010

-Adobe CS3 Web Premium. -Compiling using AS3. I'm pulling in some text values from an external XML file for a "next" button and I set the font to bold when I made it Verdana. I'm not sure why but it still is normal verdana when I compile it.

I've found several posts similar to mine saying I need to embed the bold version of the font, but I don't have the option of purchasing or creating a bold Verdana. Since it is just Verdana, is there not a method I can use to simply bold the text?

View 1 Replies

IDE :: Form Mailer From Container?

May 19, 2009

I got this:- I created a form mailer .fla and Im using php (loadVariables("action.php", OST");- everything works great, if I embed the swf into html.My problem:- I created a main .fla, where Im using a container for the form mailer .swf- in this case, the action.php file (residing in the same folder with the .swf files) doesnt compile anymore, so, mails wont be sent.

View 1 Replies

Make A Working Form Mailer?

Nov 22, 2002

have been trying to make a form mailer in flash.The form mailer for me is provided by [URL] it gives me the codes to send stuff from my web site to my email.This is the code that formbuddy has given me

<form action="http://www.formbuddy.com/cgi-bin/form.pl" method="post">
<input type="hidden" name="username" value="USERNAME">
<input type="hidden" name="reqd" value="1,2,3,4">
<input type="hidden" name="url" value="URL">

the USERNAME value is for me to add my formbuddy username after i have signed up with [URL] .Now my problem is that i dont know how to put the hidden fields in flash, especially the <input type="hidden" name="username" value="USERNAME">. So how do i do it? And yes, i have seen all the tutorials they have here about the form mailers. I also tryed to put the the hidden fields has variables in flash which again did'nt work....

View 7 Replies

ActionScript 3.0 :: Basic Flash/PHP Mailer?

Sep 22, 2010

I'm creating my first Flash website using AS3, and it's really basic. I would like to put in a contact form, which I have made. I've converted the 3 fields (name_field, email_field and message_field) to a symbol (movie) called 'form'. I've also got a send button, which is called send_btn.

I've set up the Action Script so that when the button is clicked, the user is taken to a confirmation-style page. All I want to do is called a php script (I'm comfortable with the code for that) called 'mailer.php' and send the three variables from the form to it before then loading the confirmation page.

[Code]...

View 13 Replies

IDE :: Mailer Flash Php Polish Characters

Apr 1, 2009

I used Flash-Based Email Form Using PHP by Senocular and I have a problem with Polish characters (eg. ‚, …, ™, ‡, ¼, etc). I can type them in the form but when I read the email after sending it to my mailbox the email appears with strange, unreadable marks.I have tried putting some code in the email.php like:[code]I was reading on the Internet about converting / setting charset in Flash or php (eg. I System.useCodepage=true; iconv etc�) before sending the email but I do not know exactly how it should be done.

View 1 Replies

Flash :: Media Server - Send Video And Audio Data To A Media Server By Using RTMP Protocol

Jul 22, 2010

I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.

I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.

View 12 Replies

ActionScript 2.0 :: Php Mailer Form - Add An Ip Address Detector

Jun 29, 2011

I have a mailing form and i am trying to add a line of code in the php and flash to detect the ip address of the ppl sending an email to me. I don't know anything about php

View 2 Replies

ActionScript 1/2 :: Adding Checkbox To Flash Form Mailer

Nov 26, 2009

I'm picking up where someone else left off, and I don't know the first thing about Action scripts or PHP. I have a flash form (Name, Email, Subject, Message) and I want to add a checkbox for "Add me to your mailing list" I've tried to break it down and logically figure it out, but no such luck, guess I'm not that smart.

[Code]....

View 3 Replies

Actionscript 2.0 :: PHP Mailer Verification - Block Out Blank Forms?

Mar 31, 2010

I'm completely new to programming in PHP. I finally got the Flash/ PHP mailer working as demonstrated on this site ([URL]). Now I'm just trying to figure out how to block out blank forms... and possibly do email verification.

[Code]...

View 2 Replies

ActionScript 3.0 :: Import Instruction Purpose?

Jul 18, 2009

AS1, AS2 don't require import instructionAS3 require. Why

View 3 Replies

ActionScript 2.0 :: Form Mailer Not Working When Loaded Into Movie Clip?

Apr 19, 2004

I followed this tutorial for a form mailerHowever when I try to load this from my main swf into a movie clip holder, it no longer works. It only wants to work by itself, im a novice at flash/actionscript but im wondering if this is causing the problem by trying to get to the root of my main movie instead of the actual mailer.swf?

onClipEvent(data){
_root.nextFrame();
}

View 3 Replies

ActionScript 3.0 :: Use HitTestObject To Determine If An Instruction Is To Be Executed?

Feb 26, 2010

I think in my last post I was trying something that wasn't possible, or correct There are 9 Children. The alpha of evt.target changes on mouse click, and a square is added around the evt.target which overlaps the two neigbouring Children.
 
The number of Children is then 10, and I am trying to detect whether the next evt.target is overlapped by the square before passing an instruction to change/not change its alpha.

[Code]...

View 35 Replies

ActionScript 3.0 :: Branch Target Was Not On Valid Instruction

Dec 14, 2008

This is one of the oddest errors I've encountered from the flash compiler. It spits out a bunch of compile echo text like:

Code:
- 49:pushbyte 0
stack:
scope: [global Object$ AS3.script::Parser$] AS3.script::Parser
locals: AS3.script::Parser? int Boolean int String? *
[Code] .....

View 2 Replies

ActionScript 2.0 :: Timline Based Instruction To Load New .swf?

Oct 19, 2011

I just can't find the script required to automatically load another .swf when the (already) loaded movie reaches the end of the timeline.Context: 1st swf has been inserted into an html doc with a div tag. I want to add the script to the timeline of this movie.

View 1 Replies

ActionScript 2.0 :: Non-functioning Delete Instruction In A OnEnterFrame Statement?

Nov 24, 2008

I've got a minor issue with a non-functioning delete instruction in a onEnterFrame statement. Here's the code

this.onEnterFrame = function() {if ((_root.gira1 == 1) && (_root.gira2 == 1) && (_root.gira3 == 1) && (_root.gira4 == 1)) {gotoAndPlay("action");delete this ["onEnterFrame"];_root.tunnelaperto = 1;
}}

what you suggest? Till now "delete this ["onEnterFrame"]" always went allright...

View 1 Replies

ActionScript 3.0 :: Send XML To Server?

Sep 18, 2008

I am trying to send some xml to server side script, but im having problems when it gets to the server. Namely its messing up the xml data as soon as it hits a quotion. My fucntion is below:

function sendSavedData(e:Event){
var dataXML:XML =
<test id="1" gfx="8">

[Code]....

I am not a server side guy at all btw:) Also would anyone know why when I try and POST this data nothing appears at all on the server?

View 1 Replies

ActionScript 2.0 :: Bold, Italic And Bold/italic Won't Embed?

Jul 18, 2009

I've imported four fonts into the Library and used Linkage to enable Export for Actionscript. The fonts are the four versions of Trebuchet MS:

Trebuchet MS
Trebuchet MS Bold
Trebuchet MS Bold Italic
Trebuchet MS Italic

They are named like this in the Library and for example the 'Bold Italic' version has both 'bold' and 'italic' selected in its properties.

Then I drew a dynamic textfield and selected for it's font 'Trebuchet MS Bold Italic*' so that the embed font was used. I also embeded the glyphs for 'Basic Latin' and 'Latin 1'.

Then I used this code to fill it with text:

ActionScript Code:
my_txt.embedFonts = true;
my_txt.text = "This is a sample";

The text is placed, however, it is always in the Trebuchet MS regular font. Also when I click the bold and italic icons in the Property Bar, the font won't go bold/italic. The same for just bold and just italic. It only turns bold/italic when I delete all font symbols accept the Bold Italic one.

View 9 Replies

Actionscript 3 :: Flash GotoAndStop Instruction By Label Name Instead Of Frame Number?

Apr 3, 2011

I have tested with frame number it works, it doesn't with label name. Is it possible ? In main.as:

public function gotoTab1(target:MouseEvent) {
gotoAndStop(1);
}[code]....

of course I give tab2 as label name to the frame at position 5.no error shows up.

View 1 Replies

ActionScript 3.0 :: Make A Simple Next And Back Button For An Instruction Page

Sep 9, 2009

I want to make a simple next and back button for an instruction page so far this is what I have

[Code]...

actually i prefer to do it using labels but i was expected to do it effectively,lesser code,lesser size,etc

View 1 Replies

Flash :: Send A File To The Server?

Oct 8, 2009

How can I send a photo for example to mount a virtual catalog and preview my album?I use a simple form with 5 fields of transmission and viewed the small image after submission.

View 1 Replies

ActionScript 1/2 :: Send Values To Server?

May 10, 2010

I have a client in flash sending values to server. At first time i am sending the value 150.  The server responds to returns some data.  On receiving that data the client should again send some value to server.  Where should i have to write mySocket.send to do it.  i tried doing it inside the function[code]...

View 3 Replies

.net :: Send Bytes From Server To Flash?

Oct 8, 2011

I want to send data of bytes from .net server to flash client. i have created a simple .net tcp server but what code would i need to create the flash tcp client in order to receive bytes NOT string or xml, just bytes?

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved