I have a mailing form and i am trying to add a line of code in the php and flash to detect the ip address of the ppl sending an email to me. I don't know anything about php
View 2 Replies
I got this:- I created a form mailer .fla and Im using php (loadVariables("action.php", OST");- everything works great, if I embed the swf into html.My problem:- I created a main .fla, where Im using a container for the form mailer .swf- in this case, the action.php file (residing in the same folder with the .swf files) doesnt compile anymore, so, mails wont be sent.
View 1 Replies have been trying to make a form mailer in flash.The form mailer for me is provided by [URL] it gives me the codes to send stuff from my web site to my email.This is the code that formbuddy has given me
<form action="http://www.formbuddy.com/cgi-bin/form.pl" method="post">
<input type="hidden" name="username" value="USERNAME">
<input type="hidden" name="reqd" value="1,2,3,4">
<input type="hidden" name="url" value="URL">
the USERNAME value is for me to add my formbuddy username after i have signed up with [URL] .Now my problem is that i dont know how to put the hidden fields in flash, especially the <input type="hidden" name="username" value="USERNAME">. So how do i do it? And yes, i have seen all the tutorials they have here about the form mailers. I also tryed to put the the hidden fields has variables in flash which again did'nt work....
I'm picking up where someone else left off, and I don't know the first thing about Action scripts or PHP. I have a flash form (Name, Email, Subject, Message) and I want to add a checkbox for "Add me to your mailing list" I've tried to break it down and logically figure it out, but no such luck, guess I'm not that smart.
[Code]....
I followed this tutorial for a form mailerHowever when I try to load this from my main swf into a movie clip holder, it no longer works. It only wants to work by itself, im a novice at flash/actionscript but im wondering if this is causing the problem by trying to get to the root of my main movie instead of the actual mailer.swf?
onClipEvent(data){
_root.nextFrame();
}
How would I gather the same information that's possible in an HTML form? For instance, I would like to get the IP of the sender, such as:<input type="hidden" name="env_report" value="REMOTE_HOST, REMOTE_ADDR, REMOTE_USER, HTTP_USER_AGENT">I've been getting so much spam from my Flash site, I have to figure this out.
View 7 Repliesdoes anyone know the code for sending a form in flash 5 to an email address?
View 5 RepliesI'm creating a website for a friend which it's being made using Dynamic Texts (he wants different switchable languages).Problems come when submitting the Form... I've used the same Form model (formmail) for other websites which did not use any Dynamic Text and they worked without problems.
The exact problem is that the submitted Form is not received (don't think it's even sent) to the specified email address. However, if the same website does not contain any dynamic text, then the form works properly and the query is received at my mailbox.
Anyone know how to make a flash form submit data to an email address using AS2 and php.
View 1 Replieswhat code do i need to put on a 'submit ' button to send the page's form to an email address??(if the page has got an input text box with the information in.)
View 1 RepliesI'm working in AS 2.0, Flash CS3. I want to make a contact form that allows a user to select the appropriate e-mail address from a combo box. I have made a working contact form that send to one e-mail address using PHP.
Here is the AS for it:
Code:
var sendLoad = new LoadVars ();
var receiveLoad = new LoadVars ();
send_btn.onRelease=function () {
[Code]....
Now.. how do I make a Combobox that allows the user to select who to send their e-mail to? (all I want are 3 address)
I have the following which produces a trace if the user does not type an email address when testing locally, but nothing when testing outside of Flash.
[Code]...
have created a contact form that sends 3 lots of data (name, email and message) to my email address. here is my code for my flash form which looks right
import flash.net.URLVariables;
import flash.net.URLRequest;
InteractiveObject(theName.getChildAt(1)).tabIndex = 1;
[Code].....
I know that the thread concept (as a class) does not exist in as3, but I don't understand very well the internal execution when I'm sending/receiving data via sockects.timer.addEventListener(TimerEvent.TIMER, endData);socket.addEventListener(ProgressEvent.SOCKET_DATA, receiveData);(The former event detector is just for sending data every X ms. The second one is activated when I receive something from the socket.)Then, the question is: "sendData" is executing in a different thread that "receiveData"?
View 4 RepliesI have a project where I'm removing code for bandwidth detection, but after I remove it, my code in the }else{ won't execute anymore like it did before. Not sure what I'm missing? Maybe a pair of curly braces somewhere? Here is before, and after bandwidth code removal:
stop();
images_xml = new XML();
images_xml.onLoad = startImageViewer;[code].....
I'm creating my first Flash website using AS3, and it's really basic. I would like to put in a contact form, which I have made. I've converted the 3 fields (name_field, email_field and message_field) to a symbol (movie) called 'form'. I've also got a send button, which is called send_btn.
I've set up the Action Script so that when the button is clicked, the user is taken to a confirmation-style page. All I want to do is called a php script (I'm comfortable with the code for that) called 'mailer.php' and send the three variables from the form to it before then loading the confirmation page.
[Code]...
I used Flash-Based Email Form Using PHP by Senocular and I have a problem with Polish characters (eg. ‚, …, ™, ‡, ¼, etc). I can type them in the form but when I read the email after sending it to my mailbox the email appears with strange, unreadable marks.I have tried putting some code in the email.php like:[code]I was reading on the Internet about converting / setting charset in Flash or php (eg. I System.useCodepage=true; iconv etc�) before sending the email but I do not know exactly how it should be done.
View 1 Replieshow to get your logo to appear next to the address of your web site when your website address is typed in,
for example if you look at the website address at the top of the screen you see (logo) [URL]
I'm completely new to programming in PHP. I finally got the Flash/ PHP mailer working as demonstrated on this site ([URL]). Now I'm just trying to figure out how to block out blank forms... and possibly do email verification.
[Code]...
I have a BUNCH of bumpers of four types bounceUp, bounceDown, bounceLeft, bounceRight. during a collision which you hit determines the bounce so they always do the same thing so here's my question.....can i just name every bounceUp instance the same thing and then just add that one instance name to the list the collision detector checks?
i just dont wanna go through and name a hundred each of bounceUp s and bounceDown s individually as the potential for screaming increases proportionally.......
How do I check if email address is a legitimate email address? Is there any possibility in that?
View 7 RepliesI have an online form in flash that when filled out, sends a variable containing the whole message to my PHP mailer (which in turn mails it to me).
Is there a way (at the ActionScript end) that I can instruct the mailer to send the highlighted fields in Bold.[code]...
I am having some issues with a php email form that I am using in my AS3 project. the form works perfect and all communication is good.however when the user is on the page and wants to tab to the next text field it jumps to one of my hyperlinks on the same page and not to the next text field down on the php form.
is there any way to stop this from happening.I have tried placing the php form on a seperate layer in a seperate mc and I have done the same with the hyperlinks .you can see what I mean by visiting this development site.(after entering go to contact)http:[url].....
I have only two fields Name and Email in a Order form and a PayPal button for payment at PayPal ( into my account).I can do the mail portion but have no idea about PayPal code, however on search here I found one code and after pasting this one to the PayPal button it redirects to my PayPal account.But the question is anybody can post a message and leave the site without paying me. How can I do this thing so that the user will forced to pay before posting the mail form.
View 1 RepliesI have a super involved and somewhat silly site I've been working on for a long time piecing together fragments of AS2 code and modifying them to the best of my limited ability.The site is here:http:[url]....I am finally adding the last steps, a series of contact forms with a PHP script in the back end. Anyway, I implemented a form script and have it triggered by clicking the "CONTACT" button you can see on the lower bar. So, click contact and once the form opens (an external SWF loaded into an MC), type away and everything works fine unless you use the letter "f" in either upper or lowercase. It causes the screen to flash and for the form input to lose focus.It works (in that you can enter everything normally -- the form doesn't function, but that's just the PHP which I have yet to edit.)
View 0 RepliesHow can I replace the value in the getstring for parameter partNumber=a100 with whatever the user typed into the search box.
[URL]
AS3 Code
var link:URLRequest=new URLRequest("http://www.stockmarket.aero/StockMarket/SearchActionR.do?partNumber=a100&communityName=BLU E&partial=true&theAction=search" + search_txt.text);
[Code]....
I'm struggling to get the form to to go to a new frame once the form button has been submitted. [URL]Using ActionScript 2.0 The submit button is at this following path:
Scene -> txt8 (MC) -> t8.1 (MC)
The button has the following code on:
Code:
on (release) {
share_form.loadVariables("pay_per_click.php", "POST");
}
The onClipEvent(data) is held on the movieClip txt8, as this is the clip that holds the all the form components.
Code:
onClipEvent(data){
_root.nextFrame();
}
The next from frame that i'm asking it to go to, is directly after the txt8 MovieClip. Both the the txt8 MovieClip and NextFrame have stop(); code on them.The form submits all the info into the database, I just can't get it to load the next frame.
am sending one user object from java to flex using remote object,now i want to get each item from that array to display in text boxes...how can i do this ?
userInfo=event.result as Array;
<mx:FormItem label="FirstName" fontWeight="bold" width="325" required="true">[code].....
I have a qtwebkit browser with Mozilla NPAPI plugins from which I access a web page. This page contains flash forms and I need to be able to access and manipulate its elements. Does anyone knows if this is possible and how?
PS: I don't want to use flash's ExternalInterface
I was following 1 of the flash tutorials about creating a flash form and using .php to send the form to myself.I've followed all the instructions but upon uploading, the file just doesn't seem to work. I hope to have some kind of form in my new website.
View 4 Replies
