I have a screen with transparency that pops up over a movieclip full of buttons.I need to disable the movie clip and/or buttons so they don't function when the pop up comes up.Can't get it to work with this code:
myMC._enabled=false;
or
myMC.myBTN._enabled=false;
[code].....
I have some buttons, and above them a movie clip with a 20% transparency which I use for some graphic effects in my page. But the buttons can't be accessed (they are not working) because the layer covers them.I have used the following code to disable the graphic layer:overlay_mc.buttonMode = false;overlay_mc.enabled = false;overlay_mc.mouseEnabled = false;but none of these solves the problem. The buttons are still covered and inactive.
View 3 RepliesI am attempting to disable buttons that lay under my movie that loads. This code works all the way up until I close my exit button and then the buttons do not enable again.
on(press) {
align_callout.gotoAndPlay(2);
(stop);
[code].....
here is my issue, so i have a main page with a slideOut movieclip which basically is a movie clip button and the "over" state sends a tray out of the movie clip with info and anothe rmovie clip button. i cant seem to get that movie clip button to root.gotoAndPlay("frameLabel");i have the actionscript on the same frame as the movie clip i need to act as a button. but it just doesnt seem to react to it.i have tried going to the main timeline and doing
blank_mc.blank2_mc.onRelease = function();
{
_root.gotoAndPlay("frameLabel");
[code]....
Loading a movie above another movie at level1 the btns below are still active. Can I disable the btns on the movie layer below.
btn.OnPress = function(){
loadMovie("movielevel.swf",1);
}
I have a movie clip instance ("mc1") on the Stage. When the .fla file is run I want the movie clip to do something when it is clicked, so I put in the following code:
function handlemc1(event:MouseEvent):void
{
// do something here
}
mc1.addEventListener(MouseEvent.CLICK, handlemc1);
This code works fine. Now, there are times when I will want to disable "mc1" so that it doesn't respond to a click. So I execute this code in those circumstances:
mc1.enabled=false;
But this seems to do nothing. When the user clicks "mc1" the code inside "handlemc1" is executed. I even put a trace inside "handlemc1" which prints out the value of mc1.enabled. The value that is printed to the output window is "false".
I would be grateful if someone could tell me why setting "mc1.enabled=false;" did not stop "mc1" from responding to the click event. Also, is there another way to disable "mc1"?
disable a moive clip example i use arrow key to rotate a clip then when i process i want the clip to be station at there when moving again when i use arrow key again i know use the enable but i tried many time and it fail me my coding was
_root.mymoiveclip.enable= false;
What will my movie clips not disable here. They are still clickable? I get my trace 24 times. what am i doing wrong. I have 24 cards all named card0_mc - card23_mc
code:
function disableCards() {
for (i=0; i<24; i++) {
trace("in here");
this["card"+i+"_mc"].enabled=false;
}
}
i have about 40 buttons in one movie clip called showmcall i have a massive movie clip that covers all of the movie clips , i've tried disabling the buttons by disabling the movie clip :
ActionScript Code:
showmcall.enabled = false ;
but that didnt disable the buttons.
i have make a movie clip button and function it if i roll over ,my object will fellow my mouse, Roll out my object will go away
movie Clip Name(Rb)
and mouse up my object will
object.x+=10
object.y+=10
but my movie clip button still work ! if i accidents Roll over the movie clip button ,my object will fellow my mouse again
i wanted to disable my moiveClip button,any can teach me how ? like
var Rb=true
function objectMoving(event:Event):void{
Rb=false
object.x+=10
object.y+=10
}
not sure how difficult this is going to be, but I have 30 movie clips, which will all be sequentially numbered. (pos1, pos2, pos3......pos30). They will all have the same functions, with the only change being the number. I know there is a more efficient way to write this code using arrays, but I will need help with it. I would rather have 10 lines of code than 150. I also need help with writing the code, that will disable all other movie clips, once the first one is clicked. Also, not sure how tricky the javascript part will be. Below is the code i am trying to achieve, but the long version.
[Code]...
I have an swf with several movie clips set up to work as navigation buttons (using _up, _over and _down frame labels). The same navigation swf is used by several different HTML pages and navigates between them.
I want to pass the swf a variable with FlashVars in the object/embed script that will disable the movie clip button for the page the user is currently on.
In AS3 myClip.enabled = false; only removes the rollover behavior of the clip, but does not prevent the clip from receiving mouse events.
How can I disable the clip completely so that it does not respond to events?
if i wanted to disable something like a movie clip from being clickbale (i have already linked it to a function) if i want to diable the movie clip form being clicked unless something else has been pushed how would i do this and where would i put it? also if its not too much trouble could you explain the code a little bit
View 3 RepliesI am trying to place buttons inside a movie clip to control the timeline of the same movie clip. This does not seam to work like buttons on the main timeline. When I play the movie the cursor does not turn into a hand and the rolloever affects only sort of work. I have read about controling the movie clip with buttons on the main timeline, but I need one of the buttons to change halfway through the movieclip. I want to be able to jump to interior shots while in the exterior section and vice versa. It would seem that button would work the same way inside a movie clip as they do on the main timeline, but that does not appear to be the case. I am using CS3. Action scrip 2.0 is selected, but I could change it to 3.0 if it would make a difference.
View 6 RepliesI have a movie clip with 15 frames. Each frame has buttons on it (mc's)... I was going to put the actions on the main timeline/stage and navigate within the MC from the main timeline. Is that possible? I can get the buttons on the first frame of the MC to work, but I can't seem to figure out how to target/make the buttons on the other frames work? I was thinking I could identify the path of the MC with the frame labels, but that doesn't seem to work. like: _root.RMChanger.(frame label).buttonOnFrame = function
I have to move a text box in and out over the MC backgrounds on the main stage... which is why I was thinking to do it this way? I've been switching back and forth bwtween AS2.0 and 3.0
I have been having some trouble with a movie clip basically designed to act as a button for a store front for a website.This movie clip has, stored as the front of the movie (i.e. before you click in to edit the movie) the following code:
on(rollOver){
gotoAndPlay("Over");
}[code]..........
This gives the movie the hover over and out effect and animates the button so as once pressed the button expands to give a 'Product Details' view.However, when clicked the info shows up as it should but the hit area which I put into the Movie Clip is still on the info area so none of the contents on this new window are accessible and when the cursor leaves the designated info area the movie clip returns to its first stage as it would appear at the start of the animation.Is there any simple way to disable the HitArea on specific frames within a Movie Clip?
I am using Greensock to tween and during a rollOver I need to disable some buttons. I am pretty sure the code is right but the buttons do NOT disable?
code:
import com.greensock.*;
btn_skins.addEventListener(MouseEvent.CLICK,
function() {
TweenLite.to(mtvOrange, .25, {y:0});
[Code].....
I am creating a navigation bar in Flash (which will then be used in Dreamweaver). When you mouse over each topic in menu (ex. Products), i want it play a movie clip (so it shoots out a sub-menu underneath). so far so good, but the only thing is, the sub-menu won't stay open in order for me to click on buttons in it. For each button, I assigned it the Behavior to go to a url. Also, I tested the buttons within the mc and they don't seem to direct me to url. do you think maybe it's because it's nested within the movie clip?? Is there an easier way to go about this?
[Code]....
I used the Kirupa Tutorial for Advanced Rollovers to create my navigation menu and within one of the movie clips I have additional buttons that show up on the roll over.I know that you need to place the onPress code on the frame that the buttons actually live. I have a trace("mix_btn: "+mix_btn); to find out if the button is being found.
My problem is that I dont know how to get the code below to actually dynamically load and external SWF into a container on the main timeline. A friend of mine suggested a MovieClipLoader or onLoadInit Handler but I have no idea how to use those. (I'm a noob and proud of it!). (this is my latest version of a onPress.)
Code:
mix_btn.onRelease = function() {
_root.createEmptyMovieClip("container", getNextHighestDepth())
loadMovie("musicMixes.swf", container);
[code]....
I'm trying to get buttons to redirect the user to another part of my site. However, the button is in a movieclip and won't work. URL..I've been trying to get it working for ages and it just won't work. I've even made other buttons (as you can see on the site), and they work!
View 1 RepliesI have a movie clip & inside that movie clip, some Images are moving around the stage. I want these images to act like buttons, so that when we click on them we can go to URL link. First I stopped my movie clip on mouse rollover, which is working fine & for buttons I converted these images to movie clip ( yahoo_mc) & gave action Script
on (release){
getURL("http://www.yahoo.com ", "_parent");
}
[code]...
I imported the .MOV clip (a 3D rotation) into the library, and I would like to be able to control where the rotation stops, by use of a slider or clicking a button
View 4 RepliesI'm trying to put buttons on an intro movieclip for a game and I keep getting errors saying they are undefined like this: 1120: Access of undefined property.
View 4 RepliesI have 3 layes in my file, the first one has a movie clip, the 2nd has few buttons and the third has the background image. When i rollOver the first layer with the movie clip, it zoom the entire movie. if i rollOut then it zoom out. the problem is that the buttons behind this movie clip don't work. They are placed in the layer under the first layer with the movie clip. Is there any way to make these 2 layers work, the movie clip and the Buttons? The layer with the movie clip need to be at the top. I am working with AS3. if you have any idea please let me know.
View 2 Repliesusing AS2, I need buttons inside a movie clip to jump to a particular frame in the scene.I've got the obvious:
on (press) {
gotoAndPlay(15);
}
I just don't know how to tell it to affect the scene and not the movie clip.
I have created several buttons using movie clips with animations and the 'rewind=true'method when someone mouses off. What I am wondering is, if I have 2 buttons on the stage and I want to animate both of them if one or the other is moused over at the same time, how can this be accomplished
View 1 RepliesI'd like to know if it's possible to have several buttons in a single movieclip that can interact with things outside of that movieclip? An earlier test failed due their instance names not being found, I'd like to think it were possible though.
My reason for asking is that I'd like to control the visibility/position of a large group of buttons simultaneously via AS3 while keeping to a single frame.
script that would allow the user to clikc and drag mulitple symbols- similar to this:
on (press) { startDrag (this._parent, false);}
on (release) { stopDrag ()}Only that instead of using "this", it drags the following symbols on mouse click:
background (a movie clip)[code]..............
Having a bit of a problem with a project. At the moment I have a draggable map which is a movieclip, within the movieclip I have added a range of icons for hotels, restaurants, etc.I am having a problem linking these icons so that they will take you to the correct point on my main timeline. I've converted the icons to buttons and added the script below, but it doesn't seem to be picking up that the icon is a button. I think it may have something to do with it having a start/stop drag on it.
View 4 RepliesI am building a website in flash for a design class (emphasis on design, nothing taught with actionscript)
I need help trying to figure out the actionscript for allowing buttons inside a movie clip symbol to navigate pages at the parent/root/main timeline level.
With this site I have the mainMenu as a Movie Clip symbol and have the menu items populate with animation inside the movie clip. I need these buttons when pressed to navigate to different parts of the site that are controlled on the main level of the site (outside of the movie clip the buttons reside in).
I have given the buttons instance names, btnDining in the movie clip symbol. The movie clip symbol is call mainMenu. In the main level, I have labels for the different states/pages I want the website to have (dining, accommodations, etc)
[Code]...
I don't know if it is best to run the code from inside the movie clip symbol and call the different view on the main stage/level of the flash or if I try to run from the main stage/level and reference the buttons inside the movie clip symbol.
Please help me figure this out, I am trying to go a little above and beyond on this project. I have been struggling on this for days and I have looked at tutorials, books I have on actionscript, etc.