if i wanted to disable something like a movie clip from being clickbale (i have already linked it to a function) if i want to diable the movie clip form being clicked unless something else has been pushed how would i do this and where would i put it? also if its not too much trouble could you explain the code a little bit
View 3 Repliesnot sure how difficult this is going to be, but I have 30 movie clips, which will all be sequentially numbered. (pos1, pos2, pos3......pos30). They will all have the same functions, with the only change being the number. I know there is a more efficient way to write this code using arrays, but I will need help with it. I would rather have 10 lines of code than 150. I also need help with writing the code, that will disable all other movie clips, once the first one is clicked. Also, not sure how tricky the javascript part will be. Below is the code i am trying to achieve, but the long version.
[Code]...
I have 4 navigation button and like home, about us etc.... And i want to disable home when it is click and cannot clicked it until the user click another button first. means if a visitor is at home page then home navigation is disabled, and all other are active, and when they click at aboutus button then the pages goes to the about us page and the about us button is disabled and other get active. I want this solution in AS3 with oop concept.
View 6 RepliesHi, I'm making a simple target shooting game in Flash CS3, and need to know how to make it so when you click on a movie clip, it adds 1 to a dynamic text box reading 00.
View 1 RepliesHow could you place a movie clip on a click in the same position you click?
View 11 RepliesI have a movie clip instance ("mc1") on the Stage. When the .fla file is run I want the movie clip to do something when it is clicked, so I put in the following code:
function handlemc1(event:MouseEvent):void
{
// do something here
}
mc1.addEventListener(MouseEvent.CLICK, handlemc1);
This code works fine. Now, there are times when I will want to disable "mc1" so that it doesn't respond to a click. So I execute this code in those circumstances:
mc1.enabled=false;
But this seems to do nothing. When the user clicks "mc1" the code inside "handlemc1" is executed. I even put a trace inside "handlemc1" which prints out the value of mc1.enabled. The value that is printed to the output window is "false".
I would be grateful if someone could tell me why setting "mc1.enabled=false;" did not stop "mc1" from responding to the click event. Also, is there another way to disable "mc1"?
disable a moive clip example i use arrow key to rotate a clip then when i process i want the clip to be station at there when moving again when i use arrow key again i know use the enable but i tried many time and it fail me my coding was
_root.mymoiveclip.enable= false;
On looking into buttons, I understand that to get a movie clip to play when a button is clicked you simply place the movie clip on the buttons 'hit' state. Having done this it does not work? Have I read wrong? Also the movie clip has a background the full size of the stage area. So when I attach this to the button, the button changes size to the same size as the movie? (i.e. whole stage area). How do I keep the button in it's original size while still playing the movie clip with large background?
View 2 RepliesIm trying to load a movie clip when a button is clicked
heres the actionscript im using
on (release) { this._parent.loadMovie("Video.swf", "holder", 1); holder._x = 611; holder._y = -92;}
i want the swf to load into the holder MC, instead its loading the video.swf file and replacing the original swf
I normally write javascript code, so I wonder how to do this. In JS "Microsoft IS" you'll write code like this:
document.onclick = func;
function func()
{
var obj = event.srcElement; //And there I have reference to the object;
}
The graphic designer creates flash drawings and then converts whatever objects to movieclips. Then passes them over to me. All these "mc" need the same action applied to them. So I don't need to know how many they are or their names.
When you click on a button it loads the movie clip that is on the main timeline. What I want to be able to do is when you click on another button the movie clip that you are on reverses and the new movie clip loads up.
View 4 Replieswhat i want to happen: when you click on gallery -> then bfa, it shows a list of names (movie clips). when you rollover a name, it plays a yellow fade in and a fade out on rollout. when you click a name, it opens an external movie clip that takes up the fullscreen. i want the movie clip that was just clicked to stay activated (yellow - to show that you already viewed this one) but still be clickable.
[Code]....
the this.enabled = false; keeps the name yellow but once you click it, you can no longer click this link. i think i'm really close and i hope I explained this as clear as possible. i just need to know what script would keep the movie clip stuck on the out.
What will my movie clips not disable here. They are still clickable? I get my trace 24 times. what am i doing wrong. I have 24 cards all named card0_mc - card23_mc
code:
function disableCards() {
for (i=0; i<24; i++) {
trace("in here");
this["card"+i+"_mc"].enabled=false;
}
}
I have a screen with transparency that pops up over a movieclip full of buttons.I need to disable the movie clip and/or buttons so they don't function when the pop up comes up.Can't get it to work with this code:
myMC._enabled=false;
or
myMC.myBTN._enabled=false;
[code].....
I have some buttons, and above them a movie clip with a 20% transparency which I use for some graphic effects in my page. But the buttons can't be accessed (they are not working) because the layer covers them.I have used the following code to disable the graphic layer:overlay_mc.buttonMode = false;overlay_mc.enabled = false;overlay_mc.mouseEnabled = false;but none of these solves the problem. The buttons are still covered and inactive.
View 3 Repliesi have about 40 buttons in one movie clip called showmcall i have a massive movie clip that covers all of the movie clips , i've tried disabling the buttons by disabling the movie clip :
ActionScript Code:
showmcall.enabled = false ;
but that didnt disable the buttons.
i have make a movie clip button and function it if i roll over ,my object will fellow my mouse, Roll out my object will go away
movie Clip Name(Rb)
and mouse up my object will
object.x+=10
object.y+=10
but my movie clip button still work ! if i accidents Roll over the movie clip button ,my object will fellow my mouse again
i wanted to disable my moiveClip button,any can teach me how ? like
var Rb=true
function objectMoving(event:Event):void{
Rb=false
object.x+=10
object.y+=10
}
I have a movie clip that i want to use for a button, so that when it is clicked it will move from scene1 to scene2
is there a way to make it change when the movie clip is clicked or is it only possible on a button? i want to use a movie clip because my "button" animates when the mouse hovers over it.
a gallery, i done the the roll over and roll out effects by using this keyword, now i want to add a + symbol over the imagewhen the image is clicked when the user clicks again the images with symbols it should clear the + symbol from the images,
View 8 RepliesI am attempting to disable buttons that lay under my movie that loads. This code works all the way up until I close my exit button and then the buttons do not enable again.
on(press) {
align_callout.gotoAndPlay(2);
(stop);
[code].....
I have an swf with several movie clips set up to work as navigation buttons (using _up, _over and _down frame labels). The same navigation swf is used by several different HTML pages and navigates between them.
I want to pass the swf a variable with FlashVars in the object/embed script that will disable the movie clip button for the page the user is currently on.
In AS3 myClip.enabled = false; only removes the rollover behavior of the clip, but does not prevent the clip from receiving mouse events.
How can I disable the clip completely so that it does not respond to events?
I'm using a movie clip as a button to show content on a page, effectively its like a new page of the website. Problem is, with the script im using for it, once the content is show, the button is still active and if clicked again, will re-load the content. I want a way to effectively disable the button whist the content is shown.
this.services_inner.buttonMode = true;
this.services_inner.addEventListener(MouseEvent.MOUSE_OVER, rollOver_services);
this.services_inner.addEventListener(MouseEvent.CLICK, onClick_services);
[code]........
I want to play a movie clip when I click a button.I made 3 states: inicial (how it looks before anything happens) (up)hover (plays an animation after waiting 20 frames) (over)click (plays an animation right away) (down)I placed these movie clips inside of my button's up, over, and down frames. This works great except when I click, i'll need to click and hold for my animation to get past the first frame.
View 1 RepliesI am trying to build a website, and here is the logic behind my problem. I have 2 button, when user clicked on button 1 i load movie clip from library with: _parent._parent.cont.attachMovie("Page1", "e", 0, {_x:-265, _y:-250}); when user clicked on button 2, i load other movie clip. Problem: i want remove last movie clip after user clicked on button 2 and then load new movie clip but i cant...
View 9 RepliesI have a button that when clicked starts a movie clip(a box enlarges from very tiny to large).That works fine. How do I make the same button reverse the movie clip when clicked again?
View 13 RepliesI would like to make a movie clip's height change when it is clicked. However, I can't figure out how to do it so that it smooth like a tweening.
View 4 RepliesI have a form with 5 mandatory fields and 2 of which are combo boxes.My problem is I can't get the required fields to work, the form works perfectly fine and goes to the form success frame and sends out all the information in the fields (even if they are left blank)I am on AS2.0. The registration form is a movie clip itself with the send button on the same level and not inside the movie clip.
"theCat_registration" & "theTSize_registration" are the combo boxes. This is the AS in my send button
Code:
on (release) {
if (theName_registration == "" || theContact_registration == "" ||[code]....
I have been having some trouble with a movie clip basically designed to act as a button for a store front for a website.This movie clip has, stored as the front of the movie (i.e. before you click in to edit the movie) the following code:
on(rollOver){
gotoAndPlay("Over");
}[code]..........
This gives the movie the hover over and out effect and animates the button so as once pressed the button expands to give a 'Product Details' view.However, when clicked the info shows up as it should but the hit area which I put into the Movie Clip is still on the info area so none of the contents on this new window are accessible and when the cursor leaves the designated info area the movie clip returns to its first stage as it would appear at the start of the animation.Is there any simple way to disable the HitArea on specific frames within a Movie Clip?
I am using Greensock to tween and during a rollOver I need to disable some buttons. I am pretty sure the code is right but the buttons do NOT disable?
code:
import com.greensock.*;
btn_skins.addEventListener(MouseEvent.CLICK,
function() {
TweenLite.to(mtvOrange, .25, {y:0});
[Code].....
allow the user to clip a button and then place a sybmol (either movie clip or graphic) where the user clicks. I would like to use AS2. The project is simply to label a supply and demand curve graph and user needs to plot, or place points wherever they want on the canvas.
View 3 Replies