I have a movie clip that i want to use for a button, so that when it is clicked it will move from scene1 to scene2
is there a way to make it change when the movie clip is clicked or is it only possible on a button? i want to use a movie clip because my "button" animates when the mouse hovers over it.
Baisically I've created a button using symbol and I want the button to move a movie clip up the y axis by 4 every time it is clicked (move the movie.) I really don't know how to do this. This is what I currently have but its not ActionScript:
[Code]...
i have 2 movieclips: i want to move both of them but the second movie clip will only move if the first clip reach his final destination how do i do that?
View 2 Repliesit seems simple enough but i have no idea on how i could get a movie clip to slowly move to the coordinates of another existing movie clip
View 5 Repliesit isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 RepliesI have two buttons one button is calling in a movie clip with tween and then a second button that is also calling in a movie clip into the same spot. I want to make it so that when ever you are calling a movie clip in is that it moves the other movie clip away or that it lands on top of the old one. Here is the code.
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
[Code]....
the problem is that it the second movie clip is always on top even though thay are on the same layer.
how I can create a working scrollbar for a movie clip? I've managed to get as far as inserting two buttons that allow you to move the movie clip up and down, it's just getting the scrollbar to be able to move the clip within a certain ratio that I'm finding hard to do.
View 4 Repliesso I have some buttons that, as of right now, simply trigger the scene to move on while at the same time killing some particle effect animations I have spawning when the animation is idle. What I now need to do is make these events move on to a specific scene AFTER the rest of the scene's animation has played out (about 400 more frames) I'm figuring that the gotoAndPlay command has to be tied to some sort of timer variable that I would have to figure out based on my fps. Or maybe there is a way to set up a timer directly tied to a certain amount of frames allowed to go by. I'm pretty noob at actionscript, so keep that in mind. Here is the script at the point where the animation pauses to await user input on the buttons:
[Code]....
Hi, I'm making a simple target shooting game in Flash CS3, and need to know how to make it so when you click on a movie clip, it adds 1 to a dynamic text box reading 00.
View 1 RepliesHow could you place a movie clip on a click in the same position you click?
View 11 RepliesFor example you have a flash with many navigation buttons. Each button will show different page.
Which is the better way: to use scenes or only using movie clips?
On looking into buttons, I understand that to get a movie clip to play when a button is clicked you simply place the movie clip on the buttons 'hit' state. Having done this it does not work? Have I read wrong? Also the movie clip has a background the full size of the stage area. So when I attach this to the button, the button changes size to the same size as the movie? (i.e. whole stage area). How do I keep the button in it's original size while still playing the movie clip with large background?
View 2 RepliesIm trying to load a movie clip when a button is clicked
heres the actionscript im using
on (release) { this._parent.loadMovie("Video.swf", "holder", 1); holder._x = 611; holder._y = -92;}
i want the swf to load into the holder MC, instead its loading the video.swf file and replacing the original swf
I normally write javascript code, so I wonder how to do this. In JS "Microsoft IS" you'll write code like this:
document.onclick = func;
function func()
{
var obj = event.srcElement; //And there I have reference to the object;
}
The graphic designer creates flash drawings and then converts whatever objects to movieclips. Then passes them over to me. All these "mc" need the same action applied to them. So I don't need to know how many they are or their names.
When you click on a button it loads the movie clip that is on the main timeline. What I want to be able to do is when you click on another button the movie clip that you are on reverses and the new movie clip loads up.
View 4 Replieswhat i want to happen: when you click on gallery -> then bfa, it shows a list of names (movie clips). when you rollover a name, it plays a yellow fade in and a fade out on rollout. when you click a name, it opens an external movie clip that takes up the fullscreen. i want the movie clip that was just clicked to stay activated (yellow - to show that you already viewed this one) but still be clickable.
[Code]....
the this.enabled = false; keeps the name yellow but once you click it, you can no longer click this link. i think i'm really close and i hope I explained this as clear as possible. i just need to know what script would keep the movie clip stuck on the out.
I've got a scrolldown menu and want a button w/in that MC to point back to a frame in Scene 1 on the main timeline. How would I do that? I tried the following code but it doesn't work. The frame I'm trying to get to is "facelift" (the site is for a plastic surgeon).
function toFacelift(e:Event) {
gotoAndStop (1, "facelift");
}
faceliftBtn.addEventListener (MouseEvent.CLICK, toFacelift);
ok we are talking about as2 here. here is the thing thats bugging me. I made an animation in a movie clip. It is in the first frame of my main(and only) scene which is called "main". At the end of the animation in my movie clip ive set up a frame with the following script:
gotoAndStop("main", 2);
but instead of going to the second frame on my main scene, it goes to the second frame in the movie clip and stops there.
I have a function "GetTime()" in the actions layer of Scene1 In Scene 1 I have a MovieClip called seconds_mc in the actions layer of seconds_mc I want to have a Enter_Frame Event that calls GetTime(). addEventListener(Event.ENTER_FRAME, ????.myFunction) What replaces the question marks to get me to the function on Scene1?
View 2 Repliesi want to click on a button and before i go to another scene i want to see first a movie clip playing. How can i do it?
View 1 RepliesI'm trying to call a scene from a movie clip. But nothing works. I tried to label the first frame in the second scene but that didn't work, root and crap also failed. I'm deparate. I was trying to link the chalkboard from the first scene (clipboard) to the second scene (board). There is a button within the movieclip I'm trying to use, but it just doesn't work.
View 1 Repliesim not still working on the project currently... but... im just curious about somthin... i was making a website for a project for school... and i was calling movie clips within movie clips with a lot of telltarget... then within one of them i had a button and i wanted to go to the second scene... but it wouldnt work... it wouldnt go to the scene... my friend had the same problem with somthing he was working on... im just curious if there is a way... like maybe a path or somthing for the scene...
oh yeah... also say i have a movie clip called "clip1" and a movie clip within "clip1" called "clip2"... ok... if i am in "clip2"... is there a way i can access "clip1" from inside of it... like using telltarget sort of inside out like i guess...
I have in the Scene 1, on layer 2, Frame 2 a movie clip named "Festival_conteudo_mc".And inside of this i have a buton ( close_btn ) that I would like to close this movie clip and go to the Scene 1 - to the main menu.On Scene 1 I have my menu buttons ( Festival and Contacts ).
The problem is that i dont know how to make them communicate, I've tryed _root, and As3 tells me it doesnt exist and its replace by Stage...I too new in this stuff. What happens when i put
close_btn.addEventListener(MouseEvent.CLICK,menu)
function menu(Event:MouseEvent):void
{
gotoAndStop("Scene 1", 1);
}
It give Script no error, but when i Export the movie a error 1067 is reported.
I'm trying to call a scene from a movie clip. But nothing works. I tried to label the first frame in the second scene but that didn't work, root and crap also failed. I'm deparate. I really need help now. I was trying to link the chalkboard from the first scene (clipboard) to the second scene (board). There is a button within the movieclip I'm trying to use, but it just doesn't work.
View 1 Repliesif i wanted to disable something like a movie clip from being clickbale (i have already linked it to a function) if i want to diable the movie clip form being clicked unless something else has been pushed how would i do this and where would i put it? also if its not too much trouble could you explain the code a little bit
View 3 Repliesa gallery, i done the the roll over and roll out effects by using this keyword, now i want to add a + symbol over the imagewhen the image is clicked when the user clicks again the images with symbols it should clear the + symbol from the images,
View 8 RepliesSo this is where I'm stumped. I have 2 scenes, the first scene has "mc1" and the second scene has "mc2" and a button inside it. how do i get the button in mc2 to play mc1?
View 2 RepliesThis is what I thought would be pretty easy to do:
- I have 1 scene named: "ucScene"
- I have a Movie clip on frame 1 with instance name "ucMovie"
- Inside this movie clip is a button with instance named "ucButton"
When I click this button I want my "ucScene" to "gotoAndStop" on frame 10
[Code]...
Setup:
*Scene 1:
- MovieClip1
[code].....
I have been trying to copy a movie clip from the library of one flash and paste it into the library of another. But when I do this, it always gives me, "One or more library items already exist in the document.
I have tried finding and renaming those items, renaming the existing movie clip, and even changing it into a graphic instead. Still it always replaces these certain movie clips in my main flash file.
I even tried the following: Creating a new movie clip in the new file. Then going into the movie clip of the other file I wish to copy over, and trying to copy its frames and put it into the new movie clip i created in the main file. Even then, it says I'm replacing library items!