I am using Greensock to tween and during a rollOver I need to disable some buttons. I am pretty sure the code is right but the buttons do NOT disable?
code:
import com.greensock.*;
btn_skins.addEventListener(MouseEvent.CLICK,
function() {
TweenLite.to(mtvOrange, .25, {y:0});
[Code].....
I have an swf with several movie clips set up to work as navigation buttons (using _up, _over and _down frame labels). The same navigation swf is used by several different HTML pages and navigates between them.
I want to pass the swf a variable with FlashVars in the object/embed script that will disable the movie clip button for the page the user is currently on.
In AS3 myClip.enabled = false; only removes the rollover behavior of the clip, but does not prevent the clip from receiving mouse events.
How can I disable the clip completely so that it does not respond to events?
I'm trying to create a movie clip on my my main timeline that has a movie clip button within it that pops up a box in the middle of the site that contains text and links. On Frame 1 I have the Up state, frame 2 the roll over state, and frame 3 my Down State (where Box appears).
[Code]...
The problem is that on the main time line, the button is clickable but doesnt do anything
I am creating a button with a 20 frame disolve into a page upon entry.I want the button to play a 20 frame disolve back to it's original state when the user rolls out.I want the movie clip to play from frame 21 to the end of the mc and then become inactive.I can get the button to disolve out but the user will not be able to use it after that first roll over.I was thinking of trying to add a time delay from when the first action of the rollout occurs to when the disolve is complete.How do I include a 20 frame delay in the roll out sequence?[code]
View 7 RepliesI had a button in scene and it worked perfectly.Then I put it in the movie clip, so it appeared only when mouse was over other button and then it stopped working.This is the code:
on(release){
mx.behaviors.DepthControl.bringToFront(_root.poloz enie_movie);
_root.polozenie_movie.gotoAndPlay(2);
}
Button should start a movie clip different than it is itself.
I'm using a movie clip as a button to show content on a page, effectively its like a new page of the website. Problem is, with the script im using for it, once the content is show, the button is still active and if clicked again, will re-load the content. I want a way to effectively disable the button whist the content is shown.
this.services_inner.buttonMode = true;
this.services_inner.addEventListener(MouseEvent.MOUSE_OVER, rollOver_services);
this.services_inner.addEventListener(MouseEvent.CLICK, onClick_services);
[code]........
I got an issue and i can not figured out why this utton not working. So. Here is the code which i use to navigate between pages:
[Code]..
does anybody know how to restrict the "hit state" of a movie clip working as a button, using action script or any other method?.
View 1 Repliesi have an issue with a flash tweening project i am working on..I am using flash tweening and i have an invisible button inside a movie clip, and i have actionscript for the invisible button.. but when i click on the button, nothing happens..
View 1 RepliesI have a button action not working to control another movie clip timeline. The movie clip timeline I want to control has an instance name but for some reason it's not playing. The button is on a different movie clip timeline. Both movie clips are on Scene 1. I think there is something wrong with my target path?
on(release){
_root.insMcWorkNav.gotoAndPlay("lbWork04");
insMcWorkNav is the movie clip, lbWork04 is the frame to play
I'm having some problems controling my site. I have a movie clip and inside this movie clip I have an action script to take me to a diferent scene but the button isn't working
[Code]....
When using this code in the main timeline it works great but when I put the code inside a movie clip it won't work
I've got a basic little slide show player which is timeline-based, rolling through 5 images with alpha transitions, and on the topmost layer, I have 5 invisible movie clips which have actions applied to them as follows:
on (press) { gotoAndPlay(21);}
This action should allow for the on click button to navigate to that specific frame, or image, but for some reason it is not working.
I have a movie clip instance ("mc1") on the Stage. When the .fla file is run I want the movie clip to do something when it is clicked, so I put in the following code:
function handlemc1(event:MouseEvent):void
{
// do something here
}
mc1.addEventListener(MouseEvent.CLICK, handlemc1);
This code works fine. Now, there are times when I will want to disable "mc1" so that it doesn't respond to a click. So I execute this code in those circumstances:
mc1.enabled=false;
But this seems to do nothing. When the user clicks "mc1" the code inside "handlemc1" is executed. I even put a trace inside "handlemc1" which prints out the value of mc1.enabled. The value that is printed to the output window is "false".
I would be grateful if someone could tell me why setting "mc1.enabled=false;" did not stop "mc1" from responding to the click event. Also, is there another way to disable "mc1"?
disable a moive clip example i use arrow key to rotate a clip then when i process i want the clip to be station at there when moving again when i use arrow key again i know use the enable but i tried many time and it fail me my coding was
_root.mymoiveclip.enable= false;
What will my movie clips not disable here. They are still clickable? I get my trace 24 times. what am i doing wrong. I have 24 cards all named card0_mc - card23_mc
code:
function disableCards() {
for (i=0; i<24; i++) {
trace("in here");
this["card"+i+"_mc"].enabled=false;
}
}
I have a screen with transparency that pops up over a movieclip full of buttons.I need to disable the movie clip and/or buttons so they don't function when the pop up comes up.Can't get it to work with this code:
myMC._enabled=false;
or
myMC.myBTN._enabled=false;
[code].....
I have some buttons, and above them a movie clip with a 20% transparency which I use for some graphic effects in my page. But the buttons can't be accessed (they are not working) because the layer covers them.I have used the following code to disable the graphic layer:overlay_mc.buttonMode = false;overlay_mc.enabled = false;overlay_mc.mouseEnabled = false;but none of these solves the problem. The buttons are still covered and inactive.
View 3 Repliesi have about 40 buttons in one movie clip called showmcall i have a massive movie clip that covers all of the movie clips , i've tried disabling the buttons by disabling the movie clip :
ActionScript Code:
showmcall.enabled = false ;
but that didnt disable the buttons.
i have make a movie clip button and function it if i roll over ,my object will fellow my mouse, Roll out my object will go away
movie Clip Name(Rb)
and mouse up my object will
object.x+=10
object.y+=10
but my movie clip button still work ! if i accidents Roll over the movie clip button ,my object will fellow my mouse again
i wanted to disable my moiveClip button,any can teach me how ? like
var Rb=true
function objectMoving(event:Event):void{
Rb=false
object.x+=10
object.y+=10
}
I am attempting to disable buttons that lay under my movie that loads. This code works all the way up until I close my exit button and then the buttons do not enable again.
on(press) {
align_callout.gotoAndPlay(2);
(stop);
[code].....
if i wanted to disable something like a movie clip from being clickbale (i have already linked it to a function) if i want to diable the movie clip form being clicked unless something else has been pushed how would i do this and where would i put it? also if its not too much trouble could you explain the code a little bit
View 3 RepliesI have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
I have been having some trouble with a movie clip basically designed to act as a button for a store front for a website.This movie clip has, stored as the front of the movie (i.e. before you click in to edit the movie) the following code:
on(rollOver){
gotoAndPlay("Over");
}[code]..........
This gives the movie the hover over and out effect and animates the button so as once pressed the button expands to give a 'Product Details' view.However, when clicked the info shows up as it should but the hit area which I put into the Movie Clip is still on the info area so none of the contents on this new window are accessible and when the cursor leaves the designated info area the movie clip returns to its first stage as it would appear at the start of the animation.Is there any simple way to disable the HitArea on specific frames within a Movie Clip?
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesI have some AS that creates a movie clip and later tries to make it go away. However, _visible isn't working as I would think. Here's a sample: I create the triangle:
[Code]...
It doesn't work, however. So, I tried trace(triangle30._visible) both before and after the second chunk of code, and it does indeed change from true to false. However, the movie clip is still visible on the screen.
What action script would i need to make a button in one movie clip goto and play a frame in another movie clip? Im not very good at flash but i've been trying my usual codes but it dont work..
View 2 Repliesive got a slider menu which opens when clicked. however the buttons (also mc instanced) inside the slider mc wont work... here is the code:
[Code]....
the slider mc works however i cant seem to get the 'web_MC' to respond..
I have one movie clip (photography_container_02.fla) thats loads another movie clip (slideshow_medical_02.fla) that calls xml stuff into itself. Both work fine separately but not one withing another. I researched and found that the xml needs to be set to root, but couldnt make it work. Here is the action script that is in sub movie clip: (files are also attached)
//----------XML--------
var myXML:XML = new XML();myXML.ignoreWhite = true;
myXML.onLoad = function() { trace("xml loaded");
[Code]....
i have a navigation with buttons that load external movie clips into a empty movie clip. Yes, very simple.if i click on the button to load the swf repeatedly, it will re-load the movie repeatedly (very annoying). I want to disable the button after it has been clicked once, and re-enable it when another button is clicked.The buttons reside inside a movie clip on the main stage.The empty movie clip resides on the main stage.heres the code for one of the buttons:
on (release) {
_root.target_clip.loadMovie("updates_nav.swf","1") ;
}
I just want it to load once then disable the button. I tried the button.enabled=false into the brackets but i get no results.
When roll_over button (info_btn) the child mc (infotext_1) starts and animate a text outside the button .When roll_out the child mc animate the text back to the btn.Simple, and it works... almost.[code]...
View 4 Replies