I am working on an 70 page e-magazine in Indesign and I exported it as a SWF file. The Indesign SWF is basically a 70 frame document.
I want to create a pre loader since the file is around 4MB. The problem is when I create a flash file to load the SWF into it automatically plays from frame 1 which causes the frames to just keep going. How to I create a file to with a pre loader load my Indesign SWF and stop at frame 1?
I've converted an InDesign file to XFL and opened in Flash in order to animate it. I can see that all of the pages have been converted to Movie Clip Symbols called Page 1 etc etc.
However other Movie Clip Symbols have also been generated called IsloatedGroup and NormalBlendMode which seem to contain some of the graphic elements from the original InDesign file. Can anyone tell me what these are and any othe useful info on these.
I can obviously work around not knowing but I would like to know exactly what they are.
[Code]...
I created an interactive document in InDesign CS5 that I exported as a .swf and inserted it into a html based webpage. I would like the buttons I created with url actions to open the url in the same broswer window and not in a new broswer window. Is this possible in ID CS5 and if not how can I get it done. I have enough knowledge in flash to be dangerous.
View 1 RepliesI am trying to place a video into InDesign with a flash player skin. I can't figure out how to export a document out of flash with the player as a .FLV. Since a .FLV is the only document that InDesign accepts, I am kind of stuck. I am using all Cs5 programs.
View 1 RepliesDoes the digital publication (emag) created using Indesign and flash require any action script knowledge in order to produce the search, zoom and table of contents features seen in most online digital magazine? Or is there a basic "template" that is produced in which you can modify?
View 1 RepliesI have exported my InDesign file to Flash (.xfl): Changed Transparent so Document is RGB Left text as text (did not rasterize)All one layer
Open in Flash - everything is wrong size and all over the place???
I have exported a page from InDesign to FLA that contains an InDesign multi-state object (MSO) and when I bring it into Flash and export as a SWF, the MSP just cycles through all the contained images. There's an Adobe KB that states that this is a known issue and that ActionScript can be used to stop the MSO from cycling. Does anyone know the ActionScript used to stop this?
View 1 RepliesHas anyone tried to open a .fla file exported out of InDesign CS5 to change the Flash Player setting to 9, rather than 10, then resave (or publish) as a .swf file?
If so, how did you get it work work again? What did you do to maintain the programming?
When I publish the file as .swf out of Flash CS5, then upload it to a remote server or view it in a browser window, everything has gone wacky--text is larger in scale than in the original file and the animations (fade in and slide in) on the first page, which I can't get past, run in a continuous loop.
In a "container" movie I have an imported swf flipbook from indesign that needs some buttons to move through pages. I can control it with a simple nextFrame() and prevFrame() but this is done without the page curling/turning effect. Does anybody know which as3 command(s) or function(s) calls the turning effect like when clicked at corner of pages?
View 2 RepliesI'm creating a interactive cd in Flash.In my flash file is a movieclip that consists 103 frames. Every frame is a different page.I'm using Indesign to create this pages because its the best way to work with so many different pages.When I export the pages to .jpg everything looks and goes wel. Only the quality becomes very low when putting the swf to fullscreen.I've tried exporting it as .swf but is it wisely to put 103 .swf in a flash file? I'd like to keep the text vector and readable on every screen size.
View 1 RepliesI have a Flex panel, in InDesign, from which I drag an URL. If I drop this URL on a text editor or a web browser, it works. But when I try to drop it on my InDesign document, it's a little bit harder.I have implemented a subclass of CDragDropTargetFlavorHelper. The drop works perfectly on Windows. But on mac, I have problems in the method CouldAcceptTypes :
DragDrop::TargetResponse AutocatDNDCustomFlavorHelper::CouldAcceptTypes(const DragDropTarget* target, DataObjectIterator* dataIter, const IDragDropSource* fromSource, const IDragDropController* controller) const
{
if (0 != dataIter && 0 != target)
[code]....
The problem is the IMPDataObject I get is nil. There is no item in the controller. However, there were items in the CouldAcceptTypes method, in the DataObjectIterator. So, where are my items ?I tried using a custom CDataExchangeHandlerFor, but could not really understand what its usage was for. It didn't work anyway.
I am about to eat my keyboard. I created a flash file with some swf's (created in flash) wich are loaded with loadMovie("name.swf", 4); and fscommand to open on fullscreen. No problems everything works 100%! But! When I load swf's that are created with Indesign (the swf's work fine when I open them individually) It doesn't work! It seems it loads the swf every 2 seconds again or something. I sure hope there's anyone who's got a clue for me!
View 11 RepliesI am loading in .swfs, that were exported from InDesign, using the page turn effect, into another swf that contains navigation. Would anyone know how I can make calls into the loaded swfs to trigger them to go to the next page, or report back how many pages the swfs contain? I can't seem to find any documentation on this?
View 7 RepliesFMS Amazon the solution I have been searching for to distribute my interactive swf publications made in indesign cs5 to iOS operating systems?
View 2 RepliesI have two swf files, each one almost with the same classes, the most important one is a Singleton class, each swf does "singleton.getInstance()". The diference is that one swf is like a container and the other one is like a module. So when the container loads the module from an absolute path like loader.load("file://c:/modules/module.swf") or loader.load("[URL]"), two different singletons (same class) are created
But when the container loads from a relative path like loader.load("module.swf") , just one singleton is created (that is what I want) I am just intrigued with this behavior, could someone explain me this? PD: I believe is something related to loaderContext and applicationDomain but It also appears that isn't working right. -Patricio Foieri , Vertigo Labs
The title describes the problem: Loader.load() is firing the INIT event, but in my listener it's reporting loader.content as null. The description for INIT event is "Dispatched by the associated LoaderInfo object when the properties and methods of the loaded SWF file are accessible."I'm loading a lot of JPG images, and 95 percent of the time it works fine; the init listener fires and reports valid loader. content.I absolutely need loader.content available because I need to set the bitmap smoothing property to true.I've tried using Event.COMPLETE and it has the exact same problematic behavior.
View 13 RepliesI'm feeling a bit low now as I have been suffering this for months. A simple loader loads my simple game and runs VERY FAST on even slow pcs BUT when I build this other loader, it goes quite slowly and I don't know where the app is going wrong. WHERE is the processing consumptoin coming from out of my app.
[Code]...
I have the following code which simply loads an external swf, puts it in the right place and should all be hunky dory.This works:
Code:
var myLoader:Loader = new Loader();
addChild(myLoader);
var url:URLRequest=new URLRequest("foobar.swf");[code].....
to set the dimensions of the loader so the external swf doesn't 'spill over', the result is a blank screen. No matter how high I set those dimensions it just doesn't display anything.
I got this very strange behavior from FlashPlayer debugger 10.1 r82. When I call loader.load method, no ADDED event is dispatched to the loader object. But if I open the file and call loader.loadBytes instead, an ADDED event is dispatched to the loader object. I suspect the ADDED event is dispatched because the content is being set as the child of Loader object, but why in the other case it is not dispatched?
View 4 Repliesthe file loads correctly but the loading screen only flashes up at the end.The only thing being exported in frame 1 is the loader image, and that is extremely small.Is it possible that there's a queue of things being loaded and the loader image is at the bottom of that queue? Since that was one of the last things added to the project
View 1 Repliesi have a main loader swf file called loader.swf and it loads an RSL.swf (runtime shared library for my swf files) and then 10 swf files, each one to a container (fE.: movieclip '01' in loader.swf, then movieclip '02' and so on). the 10 swf files have a lot of references to RSL.swf, and i have to use RSL.the problem is when loader.swf loads the RSL and the other 10 swfs the loader throws errors like this:
Code:
*** Security Sandbox Violation ***[code]...
then i put in EVERY swf files (loader,RSL and the other 10) the code Security.allowDomain ("*") but throws the same errors...
I'm loading some images with Loaders, cloning the BitmapData to a new Bitmap, and adding the Bitmap as a child of a Sprite. So far, so good. I want the Loaders I'm using to be removed by garbage collection, which they seem to be. The problem, or so it seems, is that when the Loaders are cleaned up, the Bitmaps I'm creating lose their data.
Edit: All this is happening when a class is instanced, and many copies of this class are being used as actors in a game. As the Actors are being created the older ones are losing their BitmapData to garbage cleanup. When all of them are finally loaded, only the last few are visible. I've rewritten my posted code as a class. If I prevent the Loaders from being cleaned up by somehow keeping a reference to them, the Bitmaps don't lose the data, but I don't want these Loaders hanging around.
[Code]..
I am attempting to load multiple images in AS3 and I'm exploring different options on how this can be done.I would like to have to only use one Load() instance and handle the various image assignments in the onComplete handler...here is my first attempt:
var buttonLdr:Loader = new Loader();
buttonLdr.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, onLoadError);
buttonLdr.contentLoaderInfo.addEventListener(Event.COMPLETE, onLoadCo
[code]....
Sorry for the complicated topic. I got a .swf that loads in other .swfs. Rather than figuring out how to make a loader for loading .swfs I thought I'd just use a simple loader in the .swf I'm loading.
However, it doesn't work. It starts fully loaded but doesn't finish. Heres the AS:[AS]_root.stop();
PercentLoaded = _root.getBytesLoaded()/_root.getBytesTotal()*100;
[code].....
how to create an image gallery that loads external bitmaps. It also has some nice fade in/fade out effects using Tweener. I was wondering, what would I need to modify from my code to load MovieClips from the library instead of the external JPEGs.
Code:
import caurina.transitions.Tweener;
var btn:Object;
var disabledBtn:Object;
[Code].....
How to access a loader loaded by a loader
View 4 RepliessiteLoader.as, Line 23 1061: Call to a possibly undefined method load through a reference with static type Loader.
[Code]....
I have a main "shell" swf which, by clicking several buttons, will load/unload various external swfs into a Placeholder_mc which resides on the main timeline in Shell.swf In the documentation and tutorials I've seen a couple different methods, and I'm not sure I quite understand the difference, or at least the reason you would use one over the other...In the 1st method, you can just add the Loader object using the addChild() method:
Code:
var myLoader:Loader = new Loader();
var myURLRequest:URLRequest = new URLRequest("ExternalFileA.swf");
myLoader.load(myURLRequest);
Placeholder_mc.addChild(myLoader);
This will apparently add myLoader to the display list once it has completely loaded.The 2nd method, you supposedly can add the Loader.content; however, it appears you can only do this once the content has completed loading, so you need to incorporate an event handler with the contentLoaderInfo object:
Code:
var myLoader:Loader = new Loader();
var myURLRequest:URLRequest = new URLRequest("ExternalFileA.swf");
myLoader.load(myURLRequest);
[code]....
What are the pros/cons of adding the entire Loader object, as opposed to the Loader.content and vice versa?
im working on an image viewer and im loading an image to a loader and then add the loader to the stage.I want the user to be able to drag and drop the image but since it's a loader i dont know how to do it.
I tried
imageLoader.startDrag = true;
imageLoader.content.startDrag = true;
but im getting an error on both.
I am doing my first all out flash site without a template and tried several different ways to load a external swf file to the site vie ui loader... it works fine on my local computer but when i put it online the external swf doesn't show at all while the rest of the site does, and im not getting any error..
View 17 Replies
