I created an interactive document in InDesign CS5 that I exported as a .swf and inserted it into a html based webpage. I would like the buttons I created with url actions to open the url in the same broswer window and not in a new broswer window. Is this possible in ID CS5 and if not how can I get it done. I have enough knowledge in flash to be dangerous.
View 1 Replies
Has anyone tried to open a .fla file exported out of InDesign CS5 to change the Flash Player setting to 9, rather than 10, then resave (or publish) as a .swf file?
If so, how did you get it work work again? What did you do to maintain the programming?
When I publish the file as .swf out of Flash CS5, then upload it to a remote server or view it in a browser window, everything has gone wacky--text is larger in scale than in the original file and the animations (fade in and slide in) on the first page, which I can't get past, run in a continuous loop.
I'm creating a interactive cd in Flash.In my flash file is a movieclip that consists 103 frames. Every frame is a different page.I'm using Indesign to create this pages because its the best way to work with so many different pages.When I export the pages to .jpg everything looks and goes wel. Only the quality becomes very low when putting the swf to fullscreen.I've tried exporting it as .swf but is it wisely to put 103 .swf in a flash file? I'd like to keep the text vector and readable on every screen size.
View 1 RepliesI have a banner ad that cycles back and forth between two ads, and am trying to set it up so that when the first ad is up (5 seconds or so) and the viewer clicks on it, it goes to one URL, and when it changes to the second ad and the viewer clicks, it takes them to a different URL.
View 5 RepliesI use a content management system [CMS] here at work so am to a certain extent restricted in terms of web design. In Dreamweaver I can easily create 'hotspots' on an image so there are hyperlinks all over it, however inserting this image in the CMS so that all the 'hotspots' work isn't possible (well I can't make it work). However, it is possible to embed Flash into the CMS by using appropriate code in an html portlet.
Consequently, if I have a .PNG image how do I convert that to a movie in Flash and then create lots of hyperlinks all over the image? If Flash is not the best way to do this, should I use Fireworks? In Fireworks I am able to add hotspots to an image, but when I save the image with the hotspots in my 'web folder' and view the url, the hotspots don't work. The onlt way I seem to be able to make the hotspots work in Fireworks is to save it as a .htm and then view that url, but obviously that is no good as I can't insert that as an image on a webpage in the CMS as it isn't an image
I've just begun to dabble in Flash and created a neat little project first up as an experiment, but now want to learn how to take it to the next level.
I watched this tutorial...
[URL]
and am now wondering how I can hyperlink the main images?
Here's the code I have:
[Code]....
I have a movie that consists of one image that scrolls across the screen. It all works beautifully. Although it's one image (jpeg) that has been saved as a movie clip, the single image is actually made up of a number of logos. What I want to do is to make each of those logos a separate hyperlink that will link to different external URLs. As the logos scroll across the screen, you can pick any one that happens to be showing at the time (the actual movie clip is larger than the stage) and then go to the relevant site.
If I save the jpeg as a button, I can't then make it scroll across the screen in the same way and I don't want to break up the image into indivdual files, as it will then not scroll as a single unit with the Actionscript that I'm using.
is there any solution available??
View 7 RepliesI have created a flash website and have encountered a problem. I am using Flash CS3 and ActionScript 3.0.I have created a text box (at the moment it is Dynamic because I have it scrolling) with text entered into it. I want hyperlink sections of the text to other frames within the flash movie. The text box is on the "news" frame - this is a page for archived news. I want to highlight pieces of the text and create hyperlinks to each of the archived news stories (each of which is on a different frame).I know how to create buttons from text and link them to different frames, however I do not want to do this because I want to maintain the text box (with hyperlinks within the text box) so that I can make this page scrollable.I have tried highlighting the text and hyperlinking it to the frame number, to the frame name, to the frame anchor, ec..
View 3 RepliesI've converted an InDesign file to XFL and opened in Flash in order to animate it. I can see that all of the pages have been converted to Movie Clip Symbols called Page 1 etc etc.
However other Movie Clip Symbols have also been generated called IsloatedGroup and NormalBlendMode which seem to contain some of the graphic elements from the original InDesign file. Can anyone tell me what these are and any othe useful info on these.
I can obviously work around not knowing but I would like to know exactly what they are.
[Code]...
I am working on an 70 page e-magazine in Indesign and I exported it as a SWF file. The Indesign SWF is basically a 70 frame document.
I want to create a pre loader since the file is around 4MB. The problem is when I create a flash file to load the SWF into it automatically plays from frame 1 which causes the frames to just keep going. How to I create a file to with a pre loader load my Indesign SWF and stop at frame 1?
I am trying to place a video into InDesign with a flash player skin. I can't figure out how to export a document out of flash with the player as a .FLV. Since a .FLV is the only document that InDesign accepts, I am kind of stuck. I am using all Cs5 programs.
View 1 RepliesDoes the digital publication (emag) created using Indesign and flash require any action script knowledge in order to produce the search, zoom and table of contents features seen in most online digital magazine? Or is there a basic "template" that is produced in which you can modify?
View 1 RepliesI have exported my InDesign file to Flash (.xfl): Changed Transparent so Document is RGB Left text as text (did not rasterize)All one layer
Open in Flash - everything is wrong size and all over the place???
I have exported a page from InDesign to FLA that contains an InDesign multi-state object (MSO) and when I bring it into Flash and export as a SWF, the MSP just cycles through all the contained images. There's an Adobe KB that states that this is a known issue and that ActionScript can be used to stop the MSO from cycling. Does anyone know the ActionScript used to stop this?
View 1 RepliesIn a "container" movie I have an imported swf flipbook from indesign that needs some buttons to move through pages. I can control it with a simple nextFrame() and prevFrame() but this is done without the page curling/turning effect. Does anybody know which as3 command(s) or function(s) calls the turning effect like when clicked at corner of pages?
View 2 RepliesI have a Flex panel, in InDesign, from which I drag an URL. If I drop this URL on a text editor or a web browser, it works. But when I try to drop it on my InDesign document, it's a little bit harder.I have implemented a subclass of CDragDropTargetFlavorHelper. The drop works perfectly on Windows. But on mac, I have problems in the method CouldAcceptTypes :
DragDrop::TargetResponse AutocatDNDCustomFlavorHelper::CouldAcceptTypes(const DragDropTarget* target, DataObjectIterator* dataIter, const IDragDropSource* fromSource, const IDragDropController* controller) const
{
if (0 != dataIter && 0 != target)
[code]....
The problem is the IMPDataObject I get is nil. There is no item in the controller. However, there were items in the CouldAcceptTypes method, in the DataObjectIterator. So, where are my items ?I tried using a custom CDataExchangeHandlerFor, but could not really understand what its usage was for. It didn't work anyway.
I am about to eat my keyboard. I created a flash file with some swf's (created in flash) wich are loaded with loadMovie("name.swf", 4); and fscommand to open on fullscreen. No problems everything works 100%! But! When I load swf's that are created with Indesign (the swf's work fine when I open them individually) It doesn't work! It seems it loads the swf every 2 seconds again or something. I sure hope there's anyone who's got a clue for me!
View 11 RepliesI am loading in .swfs, that were exported from InDesign, using the page turn effect, into another swf that contains navigation. Would anyone know how I can make calls into the loaded swfs to trigger them to go to the next page, or report back how many pages the swfs contain? I can't seem to find any documentation on this?
View 7 RepliesFMS Amazon the solution I have been searching for to distribute my interactive swf publications made in indesign cs5 to iOS operating systems?
View 2 RepliesI am working with flash 6 with a map that is already made.
1. find a layer with a name "LINKS".
2. Press F9.
3. The window "Actions" will open.In it a window you will see the following code.
4. In it a code you can change links for any state.
//Washington
_root.map.state1.onPress=function(){
this.gotoAndStop(10);
getURL("http://www.yourdomen.com/yourpage.html");
Easy enough except for the fact that there is no layer named links. All the layers are numbered. I can't get a response from the company.
when I try to make text or a button into a hyperlink within that tooltip, it doesn't seem to be usable in the preview. I click on the text/button, and it just doesn't do anything. I've tried coding it several different ways, and looked for an appropriate tutorial, but I haven't been able to find any luck. Is there something I'm missing? Can I even make hyperlinks in a tooltip that's made with that simplified code, or will I have to find another way to make them?
View 1 Repliesflash file loads text from xml. How can hyper links be used in the xml file to display them in the swf?The application i am trying to use
`<?xml version="1.0"?><mindmap>
<words>
<word value="Next Web minor" type="main">
[code].....
How would I include links in an XML file?[code]...
View 2 RepliesThe site's main area is the 3D AS2(oldschool) carousel(Lee Brimelow model) and one of the icons, when clicked, adds the content to the cooresponding textbox like the tutorial. I want the names of the URL's to be hyperlinks. So in essense, one of the icons is a portfolio link area, where I have the content= text like this:
Code: Select all<icons>
<icon image="icon1.png" tooltip="PORTFOLIO" content="Please, feel free to visit some of our projects around the web we've done for clients:[url]....
I obviouysly want the url's to link t that URL.This issue has not been directly answered from what research I have done today(ALL FREEGIN DAY!)
can someone just tell me the EASIEST way to make a text field or a buttohyperlink to another page on a site, a text anchor or another web site altogether?I don't know why Adobe has made this so un-intuitive and difficult. InDesign has a hyperlinks panel that makes it easy.I'm trying to modify a nav menu template that someone else created
View 3 Repliesplacing hyperlinks and making these hyperlinks to scroll by using a Scrollbar. But, I didn't get any solution since long time .
View 1 RepliesI want to replace the cloud banner with a series of pictures of equal height, but each picture needs to link to a webpage when clicked upon.
Can this be done? I do not need to know all the details of the "how to"
So:
1. can this banner contain pictures that contain hyperlinks?
2. if yes, can you give me some hints on how to accomplish this?
How would I create a blue html hyperlink in AS 3.0?
View 1 RepliesI recently made a .swf file which is hosted here [URL] as you can see the hyperlinks work fine and go to the correct sites. My question and impass is that whenever I post this same file as a forum signature it works fine but when I click on the hyperlinks they don't bring up the websites they act like they are dead.
btw the hyperlinks are just Text that I changed to Dynamic text with urls.
