So what i did is made a new layer called it Click Tag and put a button on it and made the button invisible, then i added this Action script to it
on (release) { if (clickTAG.substr(0, 5) == "http://www.ozarksfederal.com/") { getURL(clickTAG); }}
Ozarks Federal is the company advertising on the banner i made...and that's there websiteI think this is right but i don't know how to test if it is right?
I've been asked to add clickTAG to a banner ad. I used ActionScript 3 and my research shows it only works with ActionScript 2. Is this true?
View 3 RepliesI am trying to make a banner ad that allows me to tracks stats / click thrus.I thought I could use clickTags, but i don't know if I can since I need to have the MY link embedded in the fla.
View 0 RepliesCan someone migrate to AS3 this very very useful code? Especially for Banner makers...
[code]...
I've done a banner ad for my client. The marketing company is kicking it back saying the clickTAG variable is not working. Below is the required code and specs. The attached Zip file has the ad. I'm a newbie to AS2, which is required for the ad.
Click Tags:All Flash banner ads are required to support the clickTAG variable. The clickTAG is the tracking code assigned by the publisher to an individual ad. It allows the publisher to register where the ad was displayed when it was clicked and helps ReachLocal evaluate the effectiveness of the banner creative.
On any click, Flash ads should redirect to the URL specified in the clickTAG argument; there should be no other redirection in between.The variable name must be reflected exactly as follows: clickTAG (upper-case TAG; no space between click and TAG; not click tag, Click Tag, or any other form).The Flash banner ad should contain the following code for the clickTAG parameter:
on (release) { if (clickTAG.substr(0,5) == "http:") { getURL(clickTAG, "_blank"); }
}
The above code should be copied and pasted into the banner ad�s code exactly
* as it appears above.The code should not specify the destination URL for the ad; this is a responsibility of ReachLocal.
*Additional Web Developer Information: Depending on the structure of your Flash ad, it may be necessary to prepend "_root." or "_level0." to the clickTAG above, resulting in "_root.clickTAG" or "_level0.clickTAG".
I am trying to make a banner ad that allows me to tracks stats / click thrus.I thought I could use clickTags, but i don't know if I can since I need to have the MY link embedded in the fla.
View 1 RepliesNot really resolved, just giving up
View 2 RepliesI don't have access to the original Flash file [url]...
View 2 RepliesI'm having problems with the following code and need to merge the 2 following code together.
on(rollOver) {
getURL("javascript:expandCreative('ContainerDivID' );");
gotoAndStop(2);
} on(rollOut) {
getURL("javascript:collapseCreative('ContainerDivI D');");
gotoAndStop(1);
}
on (release) {
if (clickTag.substr(0,5) == "http:") {
getURL(clickTag, "_blank");
}}
Need the 2 following as above into one working code.
Is there a standard way to send variables through a banner ad? A client wants a banner that lets the user enter his mobile number, then receives a code by sms, and then enters the code into the banner. If the code then validates, the user is sent to a page with a login form with the phone number and code filled in. It must be possible to add the phone number and code as parameters to the clickTag somehow? I found that Adform supports using ";cppar=1&" and then variable=value pairs, but is this a standard, or a special feature of Adform?
View 1 RepliesI working on a flashbanner. It is a dynamic textfield called "regnr" where the user is supposed to add a registration number (of their car) before clicking the send button. This code is on the button:
Code:
on(release){
//getURL("[URL]"+regnr.text);
getURL(_root.clickTag+regnr.text,"_blank");
}}
It works when the domain is hardcoded but doesn't work when I am using the clickTag. Is it possible to add variables like this to a clickTag? How could this be done to actually work?
i am trying to get a 'clickTag' variable to work within a flash banner ad which i didn't make.. i have been assured that within the flash file the variable is being 'expected'.. i am using swfobject to pass in the clickTag variable..
[Code]...
the flash banner displays fine.. but there is 'clicking' element of it is not working.. ie. there is no link on the banner.. can anyone see any problems with the way i am doing this...? or.. is the problem definitely within the swf....??
I'm trying to find out if there is a way of using clickTag and Google Analytics to track outgoing banner clicks. clickTag code:
on (release) {
if (clickTAG.substr(0,5) == "http:") {
getURL(clickTAG);
}
}
Maybe someone can tell me whether the following would work:
on (release) {
if (clickTAG.substr(0,5) == "http:") {
getURL("javascript:pageTracker._trackPageview('/somebannerad');");
getURL(clickTAG);
}
}
like a solution that worked with the standard clickTag code and didn't involve changing any code in the flash file.
how to put the code into the HTML file to complete the clickTAG process for a banner ad.
I have put the following code onto the button (covers whole ad):
on (release) {
clickTAG = "http://" + clickTAG.slice(7);
if(clickTAG.substr(0,4)=="http") getURL(clickTAG,"_blank");
}
but I need to know what to do with the HTML doc....Is this how the ad goes to the intended location like a regular URL link would?
I am building a flash banner ad which I will traffic among some major ad networks. Is it possible for me to track what sites (or domains) my ad has appears on, without relying on their reporting?
View 2 RepliesCan the clickTAG code in a flash banner be changed if you only have the .swf file and not the .fla file?
View 1 RepliesI want to finish my flash, but only need a banner. I download a flash banner maker from Sothink SWF Easy, the site is [URL], which is free trial version, I like its templates very much , but there is a watermark "easy flash banner maker" at the back of my flash banner. Who once used this tool? Is there any method to remove such watermark?
View 1 RepliesI've created a banner Ad in flash that has 3 rotating ads. On each Ad I have a button link that goes to a landing page on a website. I can get the first link to work but the succeeding ones I get the following error...
[Code]...
I am building a banner ad and I am using Flash CS4. I need it so when someone clicks the banner it takes them to the page in a new window. Its just a a simple URL and I keep getting syntax errors now and I dont know how to do this properly. I have tried these methods.
[Code]...
We are having problem with one certain Flash banner. We need to insert an active transparent button or to be completely correct we would need the clickTag as an active transparent button and the next function as follows:
on (release)
{
getURL (_level0.clickTag, "_blank")
}
We designed a banner with simple animation but the whole banner must be a clickable button with clickTag, so that our client can track the click and traffic.
I've got a movie clip which is the entire size of the stage and is activated on rollover and again on rollout to return to its original state. This works fine but now I need to add a clicktag over the top of the movie clip. The clicktag then disables the movie clip when published leaving it static.
View 1 RepliesGetting clickTAG to work should be simple (using CS4 to generate AS2), On the top layer of my swf in frame 1, I placed an invisible box, made it a MC and called it transpBox_mc. In another layer of frame 1, I placed the following code:
transpBox_mc.onMouseUp = function():Void {
// with or without :Void it still doesn't work
if (_root.clickTAG.substr(0,4) == "http") {
getURL(_root.clickTAG, "_blank");
}}
// also tried this as a transparent button with an onRelease event
In the HTML, I placed a Param tag in the Object section:
<param name="flashvars" value="clickTAG=[URL]" />
And also placed the variable in the Embed section:
embed src="movie.swf?clickTAG=[URL]"
// also tried flashvars="clickTAG=[URL]"
In all cases, the movie plays fine, but the link doesn't work. I tried locally, on my server and also tried the tester at [URL] (though it isn't clear which part of the parameter to enter).
I am just about to pull my hair out - please help as I don't have that much hair to pull out. I created a flash file in Flash CS3 and was told I need to add a click tag for an agency who want to keep track of the click throughs for the ad.
I have created the invisible button layer and set up the 'hit' and tried and tried and tried to select the button and add some action script to it. (which I have seen three different codes to use)
Each time I export it or publish it I get the error message: mouse events are permitted only for button insances on release. I have read and understand I need to assign the code to the button and not the frame but for the life of me, I cannot figure out how to do that.
I select the button (which I have converted to a 'button') and F9 or left click to get the Actions panel and once I am there and try to use the '+' to add code, it automatically shows 'Current Select/Frame 1 in the left side of the Actions panel. I get that it is adding the code to the frame but how do I get it to add the code to the button???
I've created a flash banner that on rollover changes to a form and onrelease posts the variables - this works fine.My confusion is when I need to include the clickTAG script for adwords tracking.The code I've used is simple and is the following:[code]If I have both on codes one after the other will google track correctly? Is there another way that I can pass the variables to the URL that is defined in adwords via the clickTAG?
View 2 RepliesI made a banner ad and the site gave me this code to work with:
on (release) {
if (clickTAG.substr(0,5) == "http:" ) {
getURL(clickTAG, "_blank");[code].........
I made an invisible layer and put this code on it. The swf showed the hand, but when I clicked on the banner nothing happened, on my end or on the live site.Then I used this code:
on(release)
{getURL(clickTag,"_blank")}
On my end it would open a blank page. On their end they got a 404 message.Why is it not connecting to the server and opening the link? Is there something in my file that could be preventing either clickTAG from working?I exported in Flash 9. I'm using a loop code. I have many layers and masks, but all are under the invis. layer.
I've been asked to replace the clickTAG on the submit button of a form (see AS below) with the following URL but I can't get any of my AS it to work
URL Supplied by client (to replace clickTAG): [URL]
AS on SUBMIT button:
on( release ) {
// VALIDATION ONLY
var errors:Array = new Array( );
[Code].....
I'm just finishing off my first bannerproject in AS3, but I'm having some issues with the clicktag. The code I've used works just fine on all browsers except IE, which blocks the popup window. I've figured I'm supposed to use the externalinterface call to work around my IE problems. Something like this...
[Code]....
I have an ad banner that the client says the clickTag layer must be the top most layer. The problem is I have movies below that layer that animate on rollOver:
Code:
on (rollOver) {
this.gotoAndPlay("bounce");
}
These do not work unless they are above the clickTag layer. Is their a way I can adjust the rollOver code to acomodate for this? Both the clickTag and the movies are on the main time line but the rollOver animation is in its own movie.
use a universal clickTag in AS3? I usually use this,
Code:
function clickThrough(e:Event):void{
trace("click through");
var destination:String = root.loaderInfo.parameters.clickTag;[code]....
but I have a site telling me they use 'clickTAG'.Is there any easy way to programmatically check and use either?
1. Create a air app that can load any banner .swf from File.nativePath using htmlLoader.
2 .Passes clickTAG params into banner.swf
3. Listen for the click on the clickTAG
4. Detect the clickTag click in the air app.
So far I have completed number 1, and having trouble with 2, 3, 4