ActionScript 1/2 :: Add 1x, 2x Speed Through Buttons To Video?
Sep 21, 2011How to add 1x, 2x speed through buttons to video in my Flsh Video player - as2
View 1 RepliesHow to add 1x, 2x speed through buttons to video in my Flsh Video player - as2
View 1 RepliesI've got an FLV file that's 10 minutes long. I want to mimic the effect of speeding up the video, where it shows progress of the 10 minute video in say, 30 seconds.
View 2 RepliesI just made a small application with some timeline animations.But people need to be able to set a speed for how fast it plays.So how do I make a button, that they can click and then for example it al goed at half the speed.
View 1 RepliesI've created a video that starts off with 20 layers and ends with 100, so the video starts moving at a decent speed in the beginning then slows down tremendously from the middle to the end. How can I make the video run at a steady speed? Also how can I make the file size smaller without ruining the quality and changing the image size?
View 4 Repliesif it's possible to smoothly reverse the speed of an FLV streaming from the web (HTTP, not Flash Server) - that is, play the video backwards. I am using a Video instance to play a NetStream streaming the FLV. I'm waiting for the whole thing to load before playing the video (the video is paused at start), so it would be nice if there was a way to access the buffered data and then play it backwards.
View 2 RepliesIs there a way to change the speed of audio/video playing in VideoPlayer or any other such control?Let's say to play voice recordings of slow speaking persons faster to save time.Some mp3 players (e.g. COWON S9) can keep the pitch to avoid funny voice.
View 1 RepliesAnyone know how to vary the playback speed of video in Flash? I'm looking to implement this in an educational website where users can slow down the video or breeze through it by changing the playback.
Here's an example of what I'm looking for: [URL].. Except that this is a PC application, .exe. I'm looking to vary speed WITHIN Flash. I think FLV is not an option because you can only jump from cue-point to cue-point. With F4V work? MP4?
I've been following/combining a few tutorials across the Internet. I'm looking at controlling the speed of a video with a slider. I've currently got the slider working and the video on stage but I'm a little unsure as to the algorithm required to make such a slider work. The video I want to control needs to move from half speed, 0.5-1 on left half of the bar and to double speed 1-2 on the right hand side of the bar.
The below is my code so far.
Code:
import flash.events.MouseEvent;import flash.events.Event;
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
[Code].....
I'm looking for 1) an algorithm to slow/increase the speed and 2) a way to use the videoSpeed var to control the speed of a Movie Clip.
I'm trying to create a button that when pressed, will increase the frame rate speed, and when clicked again, will slow it back down. Is this possible and how it can be accomplished?
View 1 RepliesIn my flash movie, I've imported a very small video file. When the video is done playing, I wanted the user to be able to click a button and the video would play in reverse. I've gotten this to work with the _currentframe and _nextframe properties, but when I play the movie in reverse it's not as smooth. Here's an example of what happens: [URL] Once the movie is done playing, click on it. When it's playing in reverse, you can see it gets a little choppy when the guy gets towards the top of the rail. Has anyone found a way to play the movies backwards without having the speed affected? Maybe I shouldn't use the _currentframe property??
View 4 RepliesWe have a custom flash video player. It uses streaming over a hosted FMS $50/month account.Some users are complaining that the video doesn't play at all.ith one of these users, we had them go to a speed test website and it was determined that they had a very slow connection which we are assuming is what is causing them to not be able view the video.So before we try to load the video we want to determine their connection speed. Then if they have a good enough connection we will play the video and if not then we will do something else like play a lower quality video or simply display a message and not play a video at all.
View 3 RepliesI want to add an animated .gif file to my movie. So I created a new symbol and then imported the .gif file to the stage. This created the symbol containing the animated .gif.I dragged the symbol onto the scene where I want it. However, the animation seems to play at a different speed (fps) than normal. So I changed the fps of the symbol (at bottom of Timeline where it says "fps"). But for some reason this changes the fps of the rest of the entire movie.
View 3 RepliesI'm tweening a movieclip from startX to finishX. The value of startX varies but finishX is a constant. But as the startX increases in value the animation appears to be quicker. How do I adjust the speed of the tween to ensure a consistant speed regardless of the value of startX?
View 1 Repliesis there anyway to change a songs playback speed depending on a speed variable. heres the kicker tho im limited to using only as2.
View 2 RepliesIs there any way I can create a slider on my desktop to access some of the controls of the YouTube Video player like volume, pause, play, playback speed? I know it is a flash player, but would this involve accessing the YouTube API or something else? For example, I'd like to program something similar to what's provided by the Enounce MySpeed application (control over play back speed).
View 1 RepliesI have a vido page. Once I get to that page I can't navigate anywhere else unless I click the video thumbnail button and as long as the video is playing the buttons are active. I can I change this so the I don't have to click a video thumbnail button to navigate out of that page.
Code:
one.addEventListener(MouseEvent.CLICK, vid1);
two.addEventListener(MouseEvent.CLICK. vid2);
function vid1 (e:Event):void {
vidPlayer.source = "vid1.flv";
} function vid2 (e:Event):void {
[Code] .....
I have a movie clip on my scene which has a speed applied to it making it move across the screen. This is duplicated when it reaches the other end of the screen.On my scene I have some action script which is acting as a timer. After a set time I want it to increase the speed of the movie clips, making the game become "harder". I seem to be able to manipulate the alpha of my movie clips but can't seem to trigger the speed increase.If i use a setInterval it seems to trigger the speed increase but it does it each time the movie clip is duplicated (so the delay resets, it does not change once and apply throughout)However, where I am changing the alpha I cannot seem to change the speed.
View 2 RepliesHow can i detect mouse speed with AS 3.0, and then put speed limit? Also can i use speed var for anything else? *sorry for my bad English, i live in non-english-speaking country*
View 9 RepliesHow can I detect a PC speed our cpu speed with actionscript?
View 1 RepliesIs it possible to rotate through actionscript 180 through 360 degrees "buttons, graphics , video instances(flash video player) " opposed to just "movie clips"?
View 2 RepliesI am new to editing video. I am looking to add a replay link and a go to url link once my movie plays through. I am using Flash CS3 pro.
View 9 RepliesI am making buttons to control a video in flash and all is working fine except I would like the fast forward button to continue going forward as you hold it. At the moment I have th
code:
on(press) {
videoclip.nextFrame();
[code].....
I have just created a flv, and want to control a button on the stage that I placed there.
Basically when a person clicks the play button I want that button to vanish.
I have tried to make simple buttons to control play, stop, paus and play again of a video.When that did not work I found the below instructions, and made movieclips for the buttons to use with the imported FLVPlayback (with none skin).In step 2 I choose play (for the first play-button/movieclip).In step 3, there is no video to choose in the box - only my own movieclips.In step 4 - what's the difference?In step 5 - there is no setting field...Control video playback using behaviorsSelect the movie clip to trigger the behavior.In the Behaviors panel (Window > Behaviors), click the Add (+) button, and select the desired behavior from the Embedded Video submenu.Select the video to control.Select a Relative or Absolute path.If required, select settings for the behavior parameters and click OK.In the Behaviors panel under Event, click On Release (the default event) and select a mouse event.
View 1 RepliesI have built a very simple flash player using the video component and I used cue points in the flv, then I used simple buttons and find cue points code snippets to make my buttons go to a certain part of the movie. All that works very well. Now what I need to do is when a certain que point portion is playing have the button stay in a overstate and once that portion of the video is done or another button is clicked the first button return to upstate and the new portion or the new button have the overstate.
Code below
start_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint);
function fl_ClickToSeekToCuePoint(event:MouseEvent):void {
var cuePointInstance:Object = vid.findCuePoint("ch1");
vid.seek(cuePointInstance.time);
[Code] .....
I am having problems finding a site so I can put a play and rewind button on one of my flash intros.
View 1 RepliesI have applied the tutorial 3d Flip of gotoandlearn but I have added the reading of xml file which contains my videos paths, titles and description. This works, load ok and I reduce size of the videos. My pb is when I want to maximize video. I don't see the flv player's buttons.
View 2 RepliesI have embedded a flv video into my timeline, it uses the flv playback component to play and the SteelExternalAll.swf skin. I would like to control this flv using buttons that I have created that are postioned next to the video player. Ideally, these buttons would be thumbnails, similar to chapter thumbnails on DVDs and would serve a very similar function. As these thumbnail buttons are always present, I want them to change while the movie plays, I think a border around the currently playing would suffice.
The video is nearly 3 mins long, I have made cue points from Sorenson Squeeze.
I have the code that works for one button to find a cue point but how can I make this work for several buttons and their respective cue points?[code]
View 3 RepliesI have an external video list (array) that is set up to load and play in an FLVPlayback component. The client wants individual audio control buttons: 1) Up volume 2) mute 3) Down volume. I have AS on each of the buttons but it's not controlling the volume of any of the videos. The only one that works is the mute or "stop all sounds." I'm unsure on how to go about getting what I want.
View 5 Replies