I have an swf converted from powerpoint, the version is in flash 8, and i want to fire a click event on that swf to advance in the slides, how can i perform this action?
View 4 Repliesi'm trying to embed a swf to my as3 flex project like this:
[Embed(source = "../assets/next_button.swf")]
[Bindable]
protected var nextButtonClass:Class;
protected var next_btn:MovieClip = next_btn = new nextButtonClass() as MovieClip;
// ...
next_btn.addEventListener(MouseEvent.CLICK, onAdChange);
next_button.swf is as2 and created with adobe flash cs4. there is a single button inside it.
if i change type of button symbol to movieclip at next_button.fla, there is no problem at passing CLICK event.
i tried to cast next_btn to mx.controls.Button and fl.controls.Button classes, next_btn is becoming null in that case.
by the way button is reacting mouseover and click events properly just doesn't pass it to upper swf.
is there any trick i can do to pass Button events to my container swf?
I have an itemRenderer custom component inline of my DataGrid component. I need to have an event fire in the containing class (at the same level as the DataGrid) when the checkbox is checked or unchecked (in the itemRenderer component). How would I do this?
[Code]....
How do I detect the enter key being pressed on my button and fire the click event handler? (For example on a TextInput field there is an 'enter' event).
View 2 Replies<s:Button id="btnNext" label="Next" width="80"
click.Title="changeState('Info');"
click.Info="changeState('Organ');"
/>
How do I dynamically change the "click.Title" event in actionScript?
btnNext.addEventListener(MouseEvent.CLICK, ??
if I have an event listerner (mouse, keyboard, enterframe,....event) that is being triggered, and when it finishes its event, something that is able to detect the finished event listener and fire out another sets of event.
It works more like MOTION_FINISH in TweenEvent, but it is only available for TweenEvent only, what if I want to detect a mousclick, keyboard, enterframe or even touch event?
So I'm trying to build a tool that will allow me and other users to all open the same .swf, and then I as the Admin user am able to interact with mine while they all see my mouse movements and button clicks etc on theirs.I'm using BlazeDS to manage this and I'm getting data sent back and forth etc - no difficulties there. The issue I'm running into is this:
In an "Admin" instance, I click a button. I capture that X and Y, then tell Blaze to tell my clients to dispatch a Click event at that X and Y. On my client side, I get that data and dispatch a Click event at that X and Y - but the click is actually caught at the stage level. The click on my client side takes place UNDER all of my buttons and other content - so the whole thing fails.Is there a way to tell it to start the click event at the top?
An odd thing is happening for me, my eventlisteners only fire off once then they seem to stop working.
This thing is a movieclip that slides up the parent movieclip and another movieclip within mc slides it down. They only work once.
ActionScript Code:
slider.up.addEventListener(MouseEvent.MOUSE_UP, activateSlider);
slider.down.addEventListener(MouseEvent.MOUSE_DOWN, activateSlider2);
var frameBoolean:Boolean = false;
[Code].....
I'm trying to dynamically load different MovieClips based on user input. Several of those clips have embedded url link symbols. How can I add event listeners to the url links if the dynamically loaded MovieClip does not have an instance name? Seems like I can (right?) apply an instance name when the clip is loading, but the event listener doesn't compile because the name is not there yet, so that seems out.
View 5 RepliesI'm having trouble figuring out how to create onRollover handlers for movieclips loaded with loadClip. I can attach event handlers to the container clip, but not the child clips within it (the grandchildren). I'm using MX2004 / AS2.The parent clip just doesn't seem to "see" any grandchildren. It doesn't seem to be a paths issue, and I'm working in an onLoadComplete function to make sure everything's loaded first. The goal is to be able to change what happens on rollover with data pulled in (via Flash remoting) to the parent clip.
View 5 Repliesmy code is as follows:
[Code].....
This reads a php file (which in turn reads a database) and returns a series of years that have content hidden behind them. then the years are placed into a dynamic textbox within a movieclip (yearmarker = "yearmarker"+i).
This all works fine. My trouble is i can't figure out how to add an OnRollOver event to each dynamically added clip telling it to go to its second frame.
I am loading a set of thumbnail images from an array [hard coded] into a movieclip symbol on the stage. I have two arrays with the thumbnail and the full size image having the same index number. In many examples, "event.currentTarget.contentLoaderInfo.url" returns the full path to the image selected. i just want the index number. Adobe does not make is easy to figure out what other properties are available to me from the contentLoaderInfo. Is 'SelectedIndex' or something like that available? Where does an inspiring AS programmer find the contentLoaderInfo properties and or methods available? Is url the only thing that us usable here?
var thumbnails:Array = ["tn_2010OpenHouse_00.jpg","tn_2010OpenHouse_01.jpg"];
var images:Array = ["2010OpenHouse_00.jpg","2010OpenHouse_01.jpg"];
var thumbX:Number = 10;
var thumbY:Number = 623;
var loader:Loader = new Loader();
loader.load(new URLRequest("images/" + images[0]));
addChild(loader);
loadThumbs();
[Code] .....
Output:
Index= -1
Index= -1
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
I've created a drop down list and populated it with dynamic buttons. (I made a DropDown_btn class with a dynamic text field in it and then filled the button text from an xml file). On rollover I tint the button blue and then set the tint back to black on rollout. When you click on the button I'd like it to stay blue until a different button is clicked.
I thought on CLICK I'd run a function like this:
ActionScript Code:
function removeRollover(evt:MouseEvent):void {
evt.target.transform.colorTransform=c;
evt.target.removeEventListener(MouseEvent.ROLL_OUT, btnOut);
evt.target.removeEventListener(MouseEvent.ROLL_OVER, btnOver);
}
...and then I need to addEventListeners back to any button that doesn't have them and set that button back to black. I could do this by looping through an array of the buttons but I can't figure out how to access them as objects.
I also gave them each a property of "buttonValue" when I loaded them so I can access event.currentTarget.buttonValue (which in this case is a number from 1-5) but once again I can't figure out how I might leverage this information.
I'm building a swf wrapper which loads third-party swf games. The client would like a button in the wrapper which will dispatch a keyboard event in the loaded swf.
View 1 RepliesI'm building a swf wrapper which loads third-party swf games. The client would like a button in the wrapper which will dispatch a keyboard event in the loaded swf.
how to construct a dispatch event in the wrapper that reaches into the loaded swf?
In an AIR application, I have a private variable and a setter:
[Code]...
The first time that I set "saveResult" the event fires. But it will never fire again unless I restart the application. If I change the setter to:
[Code]...
Working on an mp3 player that i have cobbled together myself, bit rusty on the as3 so im sure it could be improved in many ways but the it works apart from that i cannot get the SOUND_COMPLETE event to fire at the end of a track, thus playing the next track. I have looked on this forum and others but cannot seem to get this to work
[Code]...
When someone "click and holds" I want to fire off function over and over, say, once every 100ms while the mouse is clicked. Instead of MouseEvent.CLICK I would look for MouseEvent.MOUSE_DOWN and then start a timer on that event function that calls another function every 100ms. Then, on MouseEvent.MOUSE_UP I would stop the timer. Am I on the right track? Will I be able to get updated X and Y coordinates while the mousedown event is firing?
View 3 RepliesI write a mouse_over event handler in a movieclip. But the event fired when the application run automatically even if the mouse out of the application.
View 6 RepliesI have made this short example to demonstrate some problems I'm having.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Canvas
id="buttonCanvas"
[Code]...
I'm an experienced AS developer, but this is something very basic about flex that I can't figure out. In the class below, I'm not sure why the function imageLoaded would not be executed when the image loads a url. Is there a race condition happening here? The application is completely loaded by the time this object is created and setPicture is called. How can I get the Event.COMPLETE event to fire properly in this case?The line and Log.info functions are conveniences for me, and they definitely work. Here's my MXML definition:
<?xml version="1.0" encoding="utf-8"?>
<photo:PhotoClass xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:photo="com.xxx.widgets.photo.*">
[code]....
How would I go about as to addEventListener for a array object. I'm trying to avoid running a timer every x milliseconds to check for new elements in array object, rather trying to make a event fire when new elements are detected to process them and remove them. Is it possible with Arrays? maybe ArrayCollections? either is fine.
View 4 RepliesI am looking for an event which is fired (if any) after a chart is rendered (visible in UI) in Flash, we are using Flex SDK 3.0. We have to capture the screenshot after the chart is rendered, current implementation adds a huge delay in update_complete event callback, this is slowing down the whole job of generating images. I tried to use EXIT_FRAME event, but this doesn't seem to serve the purpose.
View 2 RepliesI'm having trouble firing or capturing the results of an event firing.
Here's the current code...
<s:Panel id="instructionsPanel" left="0" right="0" top="0" bottom="0" title="Register">
<mx:HTML id="htmlViewer" left="10" right="10" top="0" bottom="10"
[Code].....
What's happening is that the user fills out a form in the HTML Viewer, then when they click the submit button I want to be notified of the page change.
If they land on URL A, then they'll be shown one message. If they land on URL B, they'll be shown another.
However, the event isn't firing.
I've also tried COMPLETE and HTML_DOM_INITIALIZE.
This is very basic and there are samples out there, but I am still struggling.
I need to fire an alert with a yes/no option.
I need to do this in actionscript.
Alert.show("Open new tab to search in Google Maps?","No places found", Alert.YES | Alert.NO, this, alertListener, null, Alert.NO);[code]...
I am trying to create an if statement where when the timer reaches 0 seconds it loads level 2. It isn't working.
ActionScript Code:
private var numberOfSeconds:Number = 10;
private var myTimer:Timer = new Timer(1000, numberOfSeconds);
[code].....
I have run into an issue where when you use the onPress function, it won't register the second onPress event if the mouse doesn't move and the user clicks the same pixel. I have to use onPress, and am wondering if there is a way around this. It is just a little annoying that I have to move my mouse to have it catch that second onPress..
View 2 RepliesIn my app I fade a movieclip, and when that movieclip reaches _alpha=0, I want it to send out a signal to let another movie clip begin to fade in.
How do I do this? Is it something even remotely like:
Code:
firstMC.on(_alpha==0) = secondMC.beginFade;
???
EDIT: I don't want to put any code on movie clips -- my code all runs from the root/main timeline.
I have run into an issue where when you use the onPress function, it won't register the second onPress event if the mouse doesn't move and the user clicks the same pixel. I have to use onPress, and am wondering if there is a way around this. It is just a little annoying that I have to move my mouse to have it catch that second onPress...
View 14 RepliesI have a Flash-based SWFUpload upload button in a HTML page. I am trying to style that button. SWFUpload provides a Javascript setup interface to the Flash button's settings. I don't have Flash myself, so I have to work with the pre-compiled SWF file.
[Code]...