I have several buttons in a movie and I want to be able to rollover an individual button and play the sound for that button and when I rolloff I want the sound for that button to stop.
View 6 RepliesNeed to make a character start to talk when the sound starts and stop talk when the sound stops so I'm using this:
[Code]...
I am using the Button component (the one shipped with CS3) inmany places in my AS3 project. I am coding in .as files, not on thetimeline.I have skinned the Button to use the colors I like. Now Iwish to "skin" it so that all instances generate a rollOver sound,and I'll be darned if I can figure out how.I know I can listen for ROLL_OVER events in each Buttoninstance. But I have many many Buttons and it seems kludgy to addthat same code to every class I have which tracks a Button. I amhoping there is some way I can make *all* instances of Buttonrespond to rollOver the same way. I am hoping it is likesetComponentStyle or changing the skin for the Button; I can do itin one place and it works everywhere.I guess I can listen on the Stage level for bubble-ups ofROLL_OVER, trap those that come from Button instances, and handleit from there, but stagewide listeners also seem a tad kludgy
View 1 RepliesI am using FLASH CS3.I have gone through many posts, seems to be an issue with many people.Still haven't come across a fix.Website made in FLASH. Flash movie loads and sound works great!I have a button with 'StopAllSounds' action script.[code]When I go back to main page... sound starts up again.Is there a way I can stop all sound regardless of where the visitor goes on the website?
View 2 RepliesI want to attach a sound to the main timeline (rollover sound) that i can call from on(rollover) button events. I will be attaching the same sound to several buttons.
View 1 RepliesI want to attach a sound to the main timeline (rollover sound) that i can call from on(rollover) button events. I will be attaching the same sound to several buttons.
View 1 Repliesim having a bit of trouble with something,if you look at the attached file, there are 2 circles(movie clips), they have an AS code on them :
onClipEvent (enterFrame) {
if (this.hitTest(_root._xmouse,_root._ymouse,true)) {
this._x = int(Math.random()*550);
this._y = int(Math.random()*400);
}
}
Now, i wanted to put a sound on the rollover, so when it ran away, it would make a noise, so i put an invisible button on the top in each movie-clip.and put a sound on the over state, but, this makes the MC's not run away!So i thought that i could add a on (rollOver), but i dont know the code to load a sound from the library.
i have a button that plays a sound when you roll over it but is there a way i can get this sound to loop until you rollout?also when i rollover it repeats x2 but if i rollover while its playing it starts another sound so its doing 2 at once is there a way to avoid this ?
this is my codes
Home.onRollOver = function() {
clickMe();
}
function clickMe() {
[code]....
p i have 4 buttons they dont go anywhere well one opens a html page.(this is an intro for a website)
so heres what it looks like
-------------------------------------------
Button Button
Button Button
-------------------------------------------
on roll over a sound(4 sounds 1-1 button) plays and if any sound is playing that stops. please check to see if my code is cool. also should the sound clip be on stage or is it fine in library i changed the linkage to export.
----so on the buttons i have---------------
on (rollOver) {
stopAllSounds();
_root.schlub01.start()
[Code]....
im making a flash animation with a background two sets of text an invisible button and a song. im trying to make the the animation start when the mouse rolls over and have it stop and reset to the beginning when it rolls out. on my invisible button (first layer) i have
on (rollOver) {
play();
}
[code].....
Can someone tell me the simplest way to add a rollover sound to a standard button in flash ? I was trying to get a small chirp sound to play on rollover of a button. Im using the standard flash button creation hierarchy. Once the fourstages of the button are set. I created a layer above it called sounds then added a blankkeyframe to the over position and dragged the chirp mp3 file onto the stage over the button. Then when i run the webpage the sound effect doesnt play a expected. I tried playing with the dropdownlist of property settings too such as Sound : and theres a dropdown list. I chose chirp.mp3 there but still no luck. Tried some other sync settings too but not able to make this work.
View 1 RepliesI have created a MC button & i was wondering if anyone could tell me how to attach sound to the rollOver event? Current AS is;
this.onEnterFrame = function(){
if(rewind == true){
prevFrame();
[code].....
i can in AS 1.0 attach a sound and play it on rollover fine...
Pretty much i have a button when you roll over it plays a sound thats it...very simple....i also know i can do it on the keyframes but i was hoping to do it dynamically as my site is completely created using AS barely no keyframes and i do not wish to start...
I use Flash MX 6.0
1) I have a button and when I put cursor over it, it must start looping a sound. When I drag away, the sound must stop. I would be even cooler if it was possible to make the sound fade away when the mouse is rolled away. I have no problem creating another sound file that fades my current sound away.
2) I have a button which represents a knife, that should stab something (a panel) once pressed. So fist the knife must be clean. but after one or more presses, the blood should remain as a movie clip (as I want to animate the dripping blood)
3) once rolled over a button, the sound must start looping (as I wrote in 1.) AND the knife should slowly go backwards (MC). BUT when I roll mouse away, the sound fades away (as in 1. again) PLUS the knife should slowly move back to its place in stead of just jump from one place to another.
The animation/rollover works well but it still abruptly stops when I rollover another button. The link below is an example on what I want to accomplish.
View 1 Replieshow to add mute sound and unmute sound script in a single button?
View 2 RepliesI have a bit of a problem with sound.. I have a main container animation with background sound that's loaded with soundChannel..I also have an externally loaded SWFs with Movie Clip buttons that have a sound ON ROLLOVER on the timeline..after rolling off - I place the:SoundMixer.stopAll();to stop the button from playing the sound once the mouse is rolled off.. However, the problem I'm running into is that it also stops the sound of the main container movie cli
View 1 RepliesI'm sure this is a common problem, I tried looking around on the forum for a problem like mine but was unable to find anything. I'm using Flash CS3, Actionscript 2.0, and am making a soundboard. I have two scenes, one that's the title screen, of which has a sound file loaded via the timeline, (I think) set to Event and Loop, and a button which takes you to the next scene and makes a short sound when it's pressed. My second scene has background music as well, also set to Event and Loop.
Problem is that when I press the button, the background music keeps playing into the next scene. I tried using putting stopAllSounds onto the button, but that makes the sound of the button stop as well, and I'd really like to keep it. I've been messing with this for days, and I can't figure it out.
i want to make a single button to play a sound, and if pressed again, stop the sound. and if pressed again, play the sound, and so on...
i know it has to be made with a boolean variable, true/false, but i just can't figure out how.
I have a map of the United States and have created a zoom effect for each state so that when the user rolls over the state, the state is magnified, and when the user rolls off the state, the state is returned to its original size. Everything works fine if the mouse movement is slow. However if the mouse movement is fast, it doesn't work.
View 1 RepliesSound Exported to Actionscript with name: shoot onPress:shoot starts?
View 3 Repliesbasically i simply want to give the option of turning of the sound in my flash via a button (If you press it sound goes mute, press it again sound unmutes) I searched around in the tutorials but i could only find (for this purpose) complicated pan sound control stuff.
View 1 RepliesI am triggering short sounds dynamically from the library for a game (Specifically Air for Android). When the user clicks a button the sound can take up to 600ms to actually play. I have set it for any silence before the actual sound by calling the sound like so:
[Code]...
All return the same results. I know there are threads here that talk about this but none have offered a real solution that I can find. Is there no way to cache the sound or store it in a buffer?
I got my video Netstream playing just the way I want it. When I rollOver a certain area, I start my video and when I rollOut I close it. My problem is that, when i've started it once and done a rollOut and afterwards do a rollOver again, I get a little glitch of sound whenever the video starts. It seems that I need to empty/flush my netstream? Looked at NetStream.Buffer.Flush, but not sure how to use it.
[Code]...
So i want the sound button to be both the same on and off like [code]...
So i want to know WHAT as2 code can i make to make it so out of the on &off button can be the SAME button on the SAME button can have the SAME on button SAME off button when you click the same thing.
I've got a simple timer set up... heres the code for the frame:
[Code].....
heres my problem: when i start the timer with the start button, it stops the music... why is that, and how can i prevent it?
I've been trying to make a button to play a sound, I've created the button and have a sound in the library, but can't manage to get the button to play the sound!!! I get this error: 1120: Access of undefined property knock_sound.
I think I need to give the sound an instance name but it says I need to use AC2 to do that!!
I have been working on flash in school, and the school upgraded from flash MX to flash CS5, i have then gone to make my project in AS3, however, it is very diffrent from AS2
My problem, is, all i want is a button to play a song from the libray (not from a URL on the internet like the code snippet) and my ICT teachers have no idea how to use AS3. I also need is a play, stop and pause button, and a volume control slider, i CAN do all these on AS2, i infact have it set up (but without a pause button) but, i cannot do this in AS3 and i need it done bady.
I imported a .aif sound in to my library and gave it a class name of "Beat". I'm using this sound as a rollover effect. So I have my variable initiated at the top like so:
Code:
var snd:Beat= new Beat();
My listener's function like so:
[code].....
I have noticed a very frustrating error in flash lately. I will be watching a video in full screen mode...on any site...then all of the sudden, the video freezes and the sound continues. This does not fix automatically. I have to minimize the video from full screen to default size and then the video unfreezes and I can then go back to full screen mode.However, eventually I have to repeat this because the video freezes again.
This happens in Firefox 3.5.6 and Chrome 4.0.249.43. I am near certain I can get this to happen in any browser but I don't use other browsers to play videos so I have not tested my theory. All I know is that the problem is very consistent.
I am using Flash Player 10 ActiveX version 10.0.32.18 in XP Pro SP3.