I Want To Apply This:
Code:
Parent : MC_parent
Child's : MC_Euro - MC_Asia - MC_Africa - MC_America - MC_Australia - MC_World - ...
I Want A Code {AS2} On a Button In Each Child's to Tell Rest Of Them
PHP Code:
gotoAndStop("start");
That's All I Mean Something Like:
PHP Code:
_parent._allMC.gotoAndStop("start");
I have a very specific AS2 parent/child movie clip issue. I have a main Character movie clip which contains as nested frames each profile of the Character (front,back,left,etc). Within each of these child profile MC frames, animations for those profiles are further nested in frames. Then, essentially I have movement code as part of the key listener:
Code:
switch(Key.getCode()){
case 87:
Character._y -= 10;
Character.gotoAndStop('Back');
Character.gotoAndStop('walk');
break;
[Code] .....
And later code to reset to the character's resting frame after key release:
Code:
switch(Character._currentFrame){
case 5:
Character.gotoAndStop('Back');
break;
[Code] .....
The problem is that when I try to Character.gotoAndStop('Front'); after key release, flash thinks, you're already on the Front frame (because the walk animation is a child of that MC and is already playing). Therefore the walk animation just keeps playing after the key has been released.
I got a Parent Sprite, let's name it SpriteP, which holds inside it two other Sprites. Sprite1 and Sprite2.[code]Sprite2 is a rectangle. When I rotate it, of course, the height of its parent, SpriteP, GROWS. But I would expect that height to go back to what it should be when I'm removing Sprite2!And it does! If I remove Sprite2 while NOT being rotated, the height of the parent drops back to normal, 200.
View 10 Repliesi am slightly confused about the parent and child relationship. lets assume we have several different instances, what would be difference of adding them all as children of the stage and creating a parent-child hierarchy between them(other than the access path).
View 5 RepliesI got a Parent Sprite, let's name it SpriteP, which holds inside it two other Sprites. Sprite1 and Sprite2.
When Sprite2 is NOT rotated:
Code:
trace(SpriteP.width + ' ' + SpriteP.height); //100 250.
SpriteP.removeChild(Sprite2)
trace(SpriteP.width + ' ' + SpriteP.height); //100 200. -> works, 200 is good.
When Sprite2 is rotated at 90:
[Code].....
And it does! If I remove Sprite2 while NOT being rotated, the height of the parent drops back to normal, 200. But if I rotate Sprite2, the Parent won't update its bounds.
[code]All clips are squared.Ok, on the PlayerPlane, there are little soldiers, which have hotkeys. The effect I'm trying to create is I want to position the GameStage so that the currently selected soldier appears in the center of the GameClicker clip.The GameStage is movable by the player (to scan other areas of the map)by holding the CTRL key, so it's easy to kinda lose track of where your players are.I have tried using localTo Global and globalToLocal techniques, but I think I'm lost on the actual math of getting the GameStage to move the correct distance so that the selected soldier is centered to the GameClicker.[code]
View 2 RepliesI'm trying to achieve is this: when you roll over one of the citymarks on my map, it drops up/down depending on the mark and where it is with three buttons for tourist sites in the area. Well, I'm using timeline animation and gotoAndStop() to go forward and backward nice and smoothly. I've got a mask applied for the menu, and that works fine, but when I compile I get this error:
Code:
TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@10ac6b01 to flash.display.SimpleButton.
at flash.display::MovieClip/gotoAndStop()
[Code].....
I got a "preloader" that creates an movieclip and loads an SWF. Now in the loaded SWF i want a close button to go back to the "preloader". The preloader isn't an actuall preloader but some sort of mainclip.Now i tried this:removeChild(MovieClip(e.currentTarget).parent.pare nt.parent)But i get error:ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.at flash.display::DisplayObjectContainer/removeChild()at MethodInfo-6()
View 1 Repliesif I add a clip to the stage as a child and remove the parent and set the parent equal to null, does the child get collected and removed from memory? What if the child has an image loaded into it as its child?
In my application I'm loading a series of png images as overlays that can be tinted for customizing in this app. When I trace my memory, the basic app idles at 64,000 k. The exact second I load those overlay images it goes up to 205,000k. If I remove those clips and "clear" the stage I should go back down to 64,000 k if everything is removed and collected correctly, right? It's not, it's hanging at 215,000 k. Are my images being cached and that is the reason for the memory staying up? If so, how do I prevent that. Or upon removing the parent of the image how can I un-cache the image.
If a user switches between models and loads several different items then the application actually crashes the Flash environment because of too much memory usage. It also does the same to browsers.
I have a parent swf which loads many child swfs (though only one is displayed at a time). My intention was to use the loaded SWFs document class to retrieve an array of objects to be assigned a tab index, combine this with the parent's own array of objects and apply sequential tab indices to them all. But what happens is actually that the parent's objects are assigned an index, but the external swf is unaffected. In fact, the external swf retains its automatic tab indexing, when I would expect that having set a value for InteractiveObject.tabIndex, automatic tab indexing would be disabled.
I've seen similar tales elsewhere. Most posts I've read are wanting to load an external swf, give it focus and loop through those objects, then close the swf and return to looping through the parent. However I would like loop through all objects as one. including manipulating the focus manager(s), and basically fiddling with every tab-related property I know.
trying to on mouse over set the parent of the moused over text field to the highest depth child of its parent i tried both of these: [code] private function
[Code]...
i want to pass the variable from parent to child .How Can i pass the Variable.Here i paste my code.
My Parent Class
public class PlayerStrobe_domaincheck extends Sprite
{
private var myService:NetConnection = new NetConnection();
private var _loader:Loader;
[Code]....
This is the code I use to load an external swf into a movieclip. It works.
var thisMovieClip:MovieClip;
var myHBIMovieLoader:Loader = new Loader();
myHBIMovieLoader.load(new
[Code]....
I have an issue where removechild won't infact remove a child. I think its something to do with my dropTarget.parent issues. The concept of the code is that you drag a source onto a destination. When you drop the source onto the destination you will get a text field that says "Hello" or "Goodbye". The objective i want to achive is that once i drop a source onto the destination, removechild will remove any previouse textfields added. This is proving difficult.
[Code].....
i've got a problem where i use the code below to communicate with another movie clip on the stage (from inside a movieclip), i don't get any errors and i even put a trace command to test it so i know it is going to that particular frame but visually it doesn't change, done the usual research, tried using a frame label instead of a frame number and also using root instead of parent.
[Code]...
none is a frame label by the way! extra info:- what i'm trying to do is integrate an as3/xml slideshow into a website which is no problem, however my menu is in another movieclip so its making it difficult to 'unload' the slideshow correctly without having an exit button (exitBtn) and hiding the navigation (menu2)
I am trying to make a calculator where a user can select from a list of items. If a user clicks say "ITEM1", it should add the item to a "CONTAINER_MC". The problem i have is all my data is set inside an array containing names and prices like the code below.
[Code]...
Here is a working script to drag drop a ball from the stage into another target mc:
ball.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
stage.addEventListener(MouseEvent.MOUSE_UP, dropIt);
function pickUp(event:MouseEvent):void{ [code]...
It works well but I'm new to AS3 and I am having difficulty amending this script to drag the ball out of a parent mc (instead of the stage) and onto another mc (the target mc). To explain: imagine a ball, a box, a tri, + more shapes all within a scrolling mc (initial parent), the user scrolls to select a shape, then drag-drops onto a target mc on the stage.The scrolling is no problem, but how would you amend the script above so that the ball can start inside a parent mc rather than on the stage itself?
i have a movieclip called hero, which on every frame has a movieclip called 'mc', which in every frame has a mc called 'sword'problem is, on the first frame after i change frame (like from the idle animation to attack) 'mc' traces null, so i cant access 'sword' either, which is a bit of a problem for the design of the game...the frame after i change tho, 'mc' and 'sword' can both be accessed fine.
View 14 RepliesI have create a custom contextMenu using AS3 and can apply that to the stage. Any movie clip I place onto the stage does not inherit the contextMenu from the stage, i.e. they display the default contextMenu.How do I apply my custom contextMenu to every child in my application?
[edit]This is a simplified version of what I have in my main.as file:
var my_menu:ContextMenu = new ContextMenu();
my_menu.hideBuiltInItems();
var my_copyright = new ContextMenuItem("Copyright - 2012");
I was adding a background image using stage.addChildAt(mc, 0);. For some reason this removes the context menu. Placing the child at 1 fixes this and allows everything to inherit the contextMenu.
I have a movie clip on the stage and have given it the instance name "team1". inside this movie clip there are two states. at frame1 it says one thing, then at frame 10 has an image. team1 stops at frame 1 and what i want to do is when the main time line reaches say frame 50, i want the team1 movie clip to gotoAndStop at frame 10, thus showing the image and not the text. i tried doing it by putting this on the main timeline at frame 50: team1.gotoAndStop("team");
View 2 RepliesParent SWF to a Child SWF
View 6 RepliesI have 9 child mc's as buttons in the parent. How could the child discover what name the parent has given it? Can the child examine a parent variable?
View 2 Replies[code]...
and I dont mean this: (which removes the parent)
i have added an movieclip as a background and added another movieclip to it. Now i want it to be placed a bit outside the bg. movieClip.x = -50; movieClip.y= -40; But if i do this, then it just gets cutoff, is there a way to make overflow visible?
View 1 RepliesSome forums suggested to simple add the child to the new parent and it would automatically be removed from the old parent. However, these were Actionscript 2.0 forums and the suggestion didn't work - it removed the child but never added it back.MovieClip(root).bmc.addChildAt(currentLetter, 0);Is it possible to take a child from one parent and add it to another in AS3?
View 3 RepliesI have a MovieClip instance which can be moved around the stage using startDrag() and stopDrag(). The instance also has some child MovieClips using addChild(). The parent moves the children when dragging, which is fine. The children have there own startDrag() and stopDrag() which should apply only to the child object, however it also moves the parent and other children. When clicking a child the MouseEvent of the child is being called but so is the parent.
public class Component extends MovieClip {
private var nodes_array:Array = new Array();
public function Component() {
x = 60;
[Code]....
Im using the following code to place an object inside a container:
testParent = new MovieClip();
testParent.graphics..beginFill(0x0000FF);
testParent.graphics.drawRect(50, 50, 300, 300);
[Code].....
this gives the testParent object a margin of 50 from top and left. The testChild object should have have the same margin relative to stage. But doesnt.. The child object is at 0,0 relative to stage. Whats causing this?...
how do I get a value from another mxml.I have a vaule in the child mxml that i would like to parse to the parent mxml.Then use the vaule to create a search method.
View 1 RepliesHow do I do this? Inside the parent swf myVar value is set by query string value loaded in by swfobject var myVar = _level0.part; // i have the value 123 here ..all good so far
[Code]...
Always childLog.text is undefined :( - so how to access the value of myvar from the child?
I have a SWF file that I call the a parent, it imports a number of SWF(children) which I can switch through. is it possible to have a function in the parent SWF that the child SWF can launch?
The reason I need this is because each child SWF is a sort of small game, so when each game is finished I need some kind of way to let the parent SWF know that the player can continue.