ActionScript 2.0 :: CS3 Switching Movie Clips On Release?
May 11, 2011
I'm new member here and quite beginner in Action Script.I am working on a project of a web page in flash and I have problem with swtiching movie clips by clickning on buttons in menu.
Generally I need to play one movie clip for example :contact_mc when contact_button is released and in the same time I want the other movie clip for example galery_mc, which was played on the scene before contact_mc appeared on the scene, to drive down outside the scene. I know how to do it when movie clips need just to be switched, for example with swapDepths, or attachMovie clip to holder which is on the scene, but in this case I need the previous movie clip, not to disapear but drive down outside the scene and in the same time, the other movie clip which is called by ckliking on the specific button, needs to be drive in on the scene.
It sounds super easy, but I don't know where to start. What I want is to have some buttons on the stage, and a mc to load some content related to the buttons. the content is in the library and is exported for actionscript. I want the content to fade in and out when you click a new button without leaving the page. Is this going to be an if then statement, switch statement, for loop?
Underlined Text On (rollOver) Is there an action script to do on (rollover) underline text? It would be on a button that would also, on (release) gotoAndPlay a frame. I know you can have a movie with AS like this:
[Code]....
But when I add the on (release) to the movie it doesnt advance the timeline on (release). And when I change the file to a button instead of a movie clip it doesnt do the underline on (rollOver).
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){ _root.gotoAndStop(1); }
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code: //Don't worry I have an OnEnterFrame function here; //attachedObj= the character; figure= the MC name of the character; attachedObj = attachMovie("figure", "figure"+1, 1);
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
How would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
I have 2 movie clip avi1 and avi2 i am using movie controls for them....like start stop pay..etc. now iam use another button whitch switches between these 2 avis.. how do i do that....also i want the controls to be same for both the movie and Working...
Here's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) { _root.mouse_over_profile_btn = true; } on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
I have a movie that consists of various audio files fading in and out of various scenes as the timeline progresses. The current mute button I've created only appears to stop the audio track currently playing when pressed. How do I silence the movie from the point of button release until the movie has played to the end? Just as an FYI, the audio files are loaded and managed manually on the timeline itself.
I am making a game in Actionscript 2 where I need to open another "window" by pressing a button. The window is just a movie clip with some stuff on it, and a red X to "X" the window out.It all works out until I "X" out the window, and try to re-open it with the button.This is the actionscript code in my button:
I'm doing a little project where I have a movie clip with 2 frames, the second frame has a video in it that's a movie clip, I have a on(release) on the movie clip, but it's not doing anything when I click is the outer movie clip stealing clicks from the one inside or something? oh, also the outer movie clip is being used as a button as well because it zooms in or out when you click it, so that might be another problem
i got this scramble text effect at this siteand when u rollover the text it does the scramble text effect i wanted to know if u can also put a on release function and have it load an swf into and empty movie clip
okay, i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect... my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect...
my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) { play(); }
also if you want to see what the problem is, here's the website in it's infancy (700k)
I have a Movie Clip which has a button and animated image on 2 layers, there is also some action scipt to control how the layers work.The Movie clip sits in my main windows and what I need to do is make the movie clip action open a swf external file in the movie clip holder I have made, I have acomplished the orignal external file to load, but now need to add diffrent files to the Movie Clip buttons.here is the base code for loading the original external file\ Code \loadMovie("news.swf","movieholder");
I have a button..that at the moment loads a movie. However I need the button to fade text then load movie!! Is it as simple as combining these twp pieces of action script? How do I go about altering this to work?
I'm making a site in Flash MX, and I have dynamic text boxes so that the data can be easily changed. For navigation I'm using rollover buttons.
My rollover buttons are actually movie clips. I don't like to use buttons for rollover animations because when you roll off of them, they jump back to their normal state without a smooth transition. This doesn't look too good.
When a user navigates the site and clicks, I want the rollover buttons to load up dynamic text in 2 different boxes (header and content) from a .txt file on the server.
I did this successfully with regular buttons, but for some reason, the exact same actionscript doesn't work with the movieclips. How come? I did this from a tutorial on this site. Heres my code for the movie clips:
Code: on (rollOver) { this.gotoAndPlay("roll_on"); }
I'm making a site in Flash MX, and I have dynamic text boxes so that the data can be easily changed. For navigation I'm using rollover buttons.
My rollover buttons are actually movie clips. I don't like to use buttons for rollover animations because when you roll off of them, they jump back to their normal state without a smooth transition. This doesn't look too good.
When a user navigates the site and clicks, I want the rollover buttons to load up dynamic text in 2 different boxes (header and content) from a .txt file on the server.
I did this successfully with regular buttons, but for some reason, the exact same actionscript doesn't work with the movieclips. How come? I did this from a tutorial on this site. Heres my code for the movie clips:
Code: on (rollOver) { this.gotoAndPlay("roll_on"); }
I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
