I'm just doing a test for the moment, where iv'e got a dynamic text field and a button. All i want is when the user presses the button, the numerical value of the number displayed in the text field increases by 1.
[code]...
I was wondering how to change a dynamic text field's font using a button.So what ever that text field contains, it will just change the font...
View 1 RepliesI am using a downloaded script and it is helping me out tremendously. After a little manipultion it is doing wonders for my intended project. The script yields a nunber into a dynamic text field that I would like to enlarge. In other words, make the font larger. I changed the size of the text field but the font size didn't change.Here's my script:
stop();
if (!initialized){
memory = 0;[code]...........
I am at work right now trying to create a power point for our Christmas party. I know I can do so much more with Flash than I can with any other power point program. Right now, I'm trying to figure out a way to load a list of names into one dynamic text field that changes at certain time intervals. I'm using ActionScript 2 right now b/c I haven't learned 3, yet. Is there a way for Flash to access a word document and load a name say, every minute? I know I could add a different variable name in front of each employee name, like content, content1, content2, but I have a list of like 300 names here. That would take up almost as much time as it would creating a slide for each name in Power Point.
View 2 RepliesIs it possible to change part of the text in a dynamic text field using Actionscript? For example can I change the color of some words that are in the middle of a sentence?
View 5 RepliesI have a xml menu bar with the menu titles in black. This titles are loaded from an xml file into a dynamic text field inside a movieclip. Well, i would like to set the color of the menu items to red when clicked and back to black when any other menu item is clicked. I know there is a way with actionscript (i have been going on circles around the color class the hole afternoon ) but i cant find it (i admit, im quite a dummy with AS).
View 2 RepliesI created a movie clip that I'm using as a button The text label on the button is determined dynamically by a variable (txtVar1) in the code. The EventListeners tell the button movie clip what frame to display acording to the mouse state. The problem is, when you mouse over the button, it "forgets" the var:String in question. It should continue to display the text from the variable ("One Bedroom") regardless what frame the button clip is currently on. I think I need a way to update or refresh this variable with each mouse movement. Also, the whole thing seems to only function once, or sporadically at bestAnother weird thing is, it's ignoring the "buttonMode = true" statement for some reason.
stop();
var txtVar1:String = "One Bedroom";this.lgndOneBedroom_mc.addEventListener(MouseEvent.MOUSE_OVER,
[code].....
I want to be able to change the dynamic text inside a button in as3, but this does not work.trying to change the text like so: movieclip1. clip1. inner1.btn1.dyntext1.text="hello" ;would result in the following error:ReferenceError: Error #1069: Property dyntext1 not found on flash. display. SimpleButton and there is no default value.I know that this method works perfectly well if the dynamic text is inside a movieclip, but not a simplebutton.So how do you get around this limitation? surely there is a way to create dynamic text buttons in flash as3?
View 2 RepliesI want to be able to change the dynamic text inside a button in as3, but this does not work. trying to change the text like so:
movieclip1.clip1.inner1.btn1.dyntext1.text="hello" ;
would result in the following error: ReferenceError: Error #1069: Property dyntext1 not found on flash.display.SimpleButton and there is no default value. I know that this method works perfectly well if the dynamic text is inside a movieclip, but not a simplebutton.
So how do you get around this limitation? surely there is a way to create dynamic text buttons in flash as3?
I can't reference a dynamic text field inside a button, sends an error.... so... How can I do a work around on this? I need...
a) to set a variable to a string value based on button clicked.
b) the button to represent embedded text (I am using a custom font).
Simple trick, or link? Or is there a way I am not finding to reference a dynamic text field within a button?
Possible Duplicate: AS3 Editing Dynamic Text
I want to change the value of a dynamic text field in a button. For example, the name of the button the button1 and the name of the dynamic text field in the button is testtext1.
However, when i try to change the text field value by doing : button1.testtext1.text="a";
I get an error that i cant access something that is null
I'm just doing a test for the moment, where iv'e got a dynamic text field and a button. All i want is when the user presses the button, the numerical value of the number displayed in the text field increases by 1.[code]...
View 6 RepliesI have a MC, and made it behave like a button:
b2.addEventListener(MouseEvent.MOUSE_OVER, mOver);
b2.addEventListener(MouseEvent.MOUSE_OUT, mOut);
b2.addEventListener(MouseEvent.MOUSE_UP, mUp);
[code]......
I've got a dynamic text field in my button object. I have named the text field "myText". How can I modify the text within it? myButton.myText.text = "test"; won't work, because it can't access myText.
View 2 RepliesI am trying to call a dynamic text field that's in a button. Something like:
Code:
btnName.textFieldName.htmlText = flashvarsObj.randomFlashVar || "";
I wish it was this simple, but unfortunately this doesn't seem to be working.
I have a dynamic text on the stage which gets updated (shows numbers) when some buttons are pressed.I just need to know if it is possible to show the first dynamic textfield in another dynamic textfield.Lets say the first dynamic textfield called "price" and the second one called "price2". when a button is pressed, the first dynamic textfield "price" will show a number. is it possible to show whatever is shown in the "price" in "price2" ?
View 1 RepliesI'm creating an XML-driven pie chart in AS3 with 2 text boxes in each pie slice. Both text fields are dynamic in the sense that they are populated by the XML doc and then told where to place themselves in the AS3. I've got them both using the same x and y position to place themselves at the moment (which of course puts them right one top of each other), but I'd like to make one of the fields (which acts like a label or a title to the larger number and % text field) place itself in a particular spot around the other text field. The result I'm looking for is to have the smaller "title" text field appear approximately 5 pixels above and left-justified to the larger "percentage" field.
Anyway, here are two sections of code that I've currently got. The first chunk, for the Tags portion, sets the position for the "percentage" text field using a good old x and y method. The second chunk, for Titles, is setting the position for the smaller "title" text.
//evaluate tags
private function evaluateTags():void{
for (s=0; s
[Code]....
I have what seems to be a simple task, yet I cannot seem to figure it out. I am busy creating a project in ActionScript 3, and while I am fairly fluent in ActionScript 2, I am being stumped a bit here.
I have a simple dynamic text field inside a button object. This text field has the name of txt_title. I have attached event handlers to change the alpha of the buttons when they are hovered over, however I also want to change the value of the text field within the button, when hovered over. My event listener looks like follows:
[Code]...
I *know* this is simple. I've read every thread on this board pertaining to this (including senocular's Best Of thread), done everything there and this still doesn't work and I can't see why.
I feel like an idiot even asking, because I've seen the examples and lengthy tutorials.
All I want to do, is change the color of a dynamic text field when you press a button. But I want the name of the field to be a variable.
Now, this is what's there:
1. the variable "_root.expinttype1" is equal to "branch" and is set elsewhere.
1a. There is an existing dynamic field called "branch" on screen.
2. On the button release I set the format:
[Code]....
Why? I set a dummy variable txt = _root.expinttype1; and even threw it into a text field to verify the data, and it shows "branch", so why doesn't this work?
Currently I'm using javascript which works fine to pass text from textfield A to textfield B:
Code:
window.onload=function()
{
document.forms.form1.shirtText.value=document.forms.form1.KitGroupID_16_TextOption_38.value
}
Is there a way to pass the textfield A text to a dynamic text input (flash) as I'd like to use the font embedding flash offers. I can make it work when loading a value from a txt file but I'm not sure how to access the value identified above as KitGroupID_16_TextOption_38 and make it appear in a dynamic input box. Eventually I might want to have 3 font choices for the user but I'd like to just see if I can get this working properly first.
Is it possible to login through flash using one Dynamic Text Field and one Input Text Field and no buttons? If so how? I have seen many tutorials dealing with logging in to PHP using flash but it requires you to make your own php scripts which i am not familiar with. Can some one tell me how to do this with PHPBBs existing php scripts... I want to be able to login thorugh a Input Text Field box and have it verify it in PHP and also be able to register and view other PHP info such as users online and FAQ..
View 2 Repliesi have a problem with the line space flash creates when a dynamic text is loaded in a dynamic text field on the stage i put a dynamic textFild with istance name "profile_text". then im loadin in it a text. my text is written in the Notepad like this
[Code]...
i already set a Textformat to my dynamic text with i tryied to play with the "Leading".. but i think it something dealing with paragraph. how i can decrease spacing between paragraphs??
All I want to do is add text from my string to dynamic text field when I click dynamic buttons. What should the as code be for this? Here is my code. Right now I just have the click returning another shape.
[Code]....
I have a project that has a heap of variables that I have created for workd definitions. I have made a dynamic text box so it just loads up the correct text from the variable. NOW, question is I want to use a listener? (A href?) to know if the user is clicking on a word inside the dynamic text box. There are some words in some of the definitions that I hav also written separate variables and definitions for. e.g. in the definition for promotion var w5="Promotions"; var def5="Promotions are where your business tries to increase the sales of a particular item through offering a good deal, advertising or a special display.There is the word advertising, I want to call a function that will then bring up the variable for advertisiing and so change the text in the dynamic textbox
[Code]...
What I'm trying to do is to write something in an input field and then it should show up in a dinamic field. I can make this happen, but the problem is that the dinamic field shows its new text in the same format as the Input field. For example, the input text is written in TimesNewRoman and the dinamic text is in Arial, but when the dinamic text shows the input, the text is still in TimesNewRoman when I want it to be in Arial.
View 11 RepliesIs it possible to change the text property of a text field that is contained within a sprite? I've been trying but can't come up with the right syntax. Here is what I'm doing:
I've created a sprite named "lessonSprite" and added a text field to it in one function. Now, in another function, I'd like to change the text in the field.
I've tried to use this:
lessonSprite.titleField.text = xmlLsnContent.attribute("title");
where "titleField" is the name of the field added to the sprite "lessonSprite" in an earlier function.
Consider I have the text
A quick brown fox jumps over the lazy dog.
Now, this text is in a dynamic text field. I do not want to change the color of the whole field. just made fox red and dog blue.
How, can I do that in AS3. Have been looking around without no luck.
I can't cope with the inheritance of this AS 3.0! I have the next code:
package {
import flash.display.Sprite;
import flash.text.*;
public class CText extends Sprite {
[code]....
My only purpose is to create a text field, which is formatted and to have a chance to manipulate it later, so I think I need to express it as a Sprite.
Is it possible to change the way a array element displays in a dynamic text field. example this is the code i was given for flash AS2 lash 8
[Code]...
What I would like is to make the first two items off the array "Gen 1 Fail" and "Warning level 2" red text and warning three and four amber text and "end of list " white is this possible? I have looked at the string class but there does not seem to be a color property and text format seems to change the whole text field.
I am trying to change the background color of a textInput field.
I have tried:
ActionScript Code:
var textInputFormat:TextFormat = new TextFormat();
textInputFormat.color = 0xFF0000;
_textInput.setStyle("backgroundColor", textInputFormat);
However this doesn't want to work.