I was wondering if it's possible to change the frame of a movieclip (present on the stage) by going on a certain frame or clicking a button in the main movie, if you get what I mean. Let's just say I want to go to frame 2 in movieclip "Symbol". Also, would it be possible to do the opposite and go to a frame in the main movie from a movieclip?
View 9 RepliesI create a movieclip button, and I want to change main timeline from it. what should I do ?
�
Is it useful to use MovieClip(root).gotoAndPlay(Is there any other way to change main timeline?
I have a movieclip and within it is a bit of actionscript and a couple of different movieclips to make it function like the button on a ball point pen (you click it and it stays clicked until you click it again).
�
var booleanClick:Boolean = false;
var colorTransform:ColorTransform = optBox.transform.colorTransform;
optHitState.addEventListener(MouseEvent.CLICK, onClickHandler);
function onClickHandler(myEvent:MouseEvent){
[Code].....
�
I don't want to get deeper into this monster of a project without making sure this is working first. Is my boolean working and just my trace statements aren't worded right or is my method to change the boolean wrong?
I have the scenario below. I have a movieclip on the stage (root). Inside this movieclip I have a frame with the action below:
_root.MCHappy.visible = false;
_root.MCSad.visible = false;
_root.MCNormal.visible = true;
I cant get this working with AS3. How is the correct way to do that inside a MovieClip with AS3?
How Do I Change Stage Frame From Inside MovieClip?
�
Heres my code so far:
�
hh.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
function fl_MouseClickHandler(event:MouseEvent):void{��� gotoAndStop(2);}
��
i tried (root).gotoAndStop(2); but i got an error , #1061 ..
I have one button and it's primary role is to stop all sounds in the project when triggered. It is just positioned on the main stage in the main project, not inside of a MC.
I then have a very simple music playing system (4 buttons, one for each song) in it's own MC which displays text of the artist and title song when respective buttons are pressed.
This works fine, apart from the fact that when I click the 'stop sounds' button the text is still displayed from whetever the last song was that had been playing.
I was thinking there must be a simple method of incorporating an actionscript function into the 'stop sounds' button, so that when it's pressed it also takes control of the movie clip and moves it to the first frame which doesn't display any of this text.
I was thinking of a simple gotoAndPlay command followed by something, but I don't know the command to tell Flash where to find frame 1 of this movie clip rather than just frame one of the whole project.
I have a textField inside a mc. When you roll over an event is triggered. In the fuction I can do this:
Code:
event.currentTarget.getChildAt(0).text="fred";
And the text changes - so its being targeted. I want to change the format of the text so I thought.
Code:
event.currentTarget.getChildAt(0).defaultTextFormat=mTitle_fmt;
But, its doesn't work.
It says "ReferenceError: Error #1037: Cannot assign to a method setTextFormat on flash.text.TextField. at index001_fla::MainTimeline/overHandler()"
I have a movieClip in the library with the linkage Class name as "LinkClass". I can make it appear on the stage, but there's a dynamic text box inside that is called "linkText" that I can't seem to get working. Here's the code:
myLink = new LinkClass();
myLink.name = "linkButton";
box.boxMC.linksMC.addChild(myLink);
[code]......
How can I get a button inside a movieclip link to a frame in another movieclip on the scene? I tried this code:
function gotoCenter(event:MouseEvent):void {
MovieClip(root).centermc.gotoAndPlay(2);
}
skruetest.addEventListener(MouseEvent.CLICK, gotoCenter);
..where "skruetest" is the button, "centermc" is the movieclip where I want to go to frame 2. I don�t get errors with this code, but nothing happens when I click the button. What can I do?
how I access variables in a frame on the stage with code from a frame within a movieclip?(basically passing variables from a stage frame to a movieclip frame)
View 4 RepliesI loaded xml on a movieclip and i also have a button to go to another frame but the xml keeps loadding!! what can i do to remove the xml each time i click on that button?
I'm using flash cs4 AS3.
I have a problem, no I already have the code and here is what I am using (MC is the original movieclip on the stage while MC1 and MC2 are child movieclips within MC)
Code:
var ob1color = new color("_root.MC.MC1");
var ob2color = new color("_root.MC.MC2");
ob1color.setRGB(0x00FF00);
ob2color.setRGB(0x00FF00);
That code works perfectly fine it's just that if I animate MC1 and MC2 within MC it doesn't work I would have to group those 2 into a seperate movieclip called MC3 in order for the animation to work. I mean it's great I found a way around it but is there anyway to NOT have to have that MC3 in order for the animation to work? Because working with so many Movieclips can get so annoying this is my hierarchy.
Code:
[Stage] > [MC] > [MC3] > [MC1 MC2 animation]
That MC3 is an un-needed movieclip other than to work the animation. Is there any way I can fix that? I Also have to change the code to look like this
Code:
var obcolor = new color("_root.MC.MC3");
It's looking like you can't apply a color change AND animate an object.
On the stage I have a movieclip called mc_back. I also have a movieclip on the stage called mc_content. Now, inside mc_content I have a bunch of code and some of it adds, or should add, an EventListener to mc_back as well as a a function that works when mc_back is pressed.
So basically, all code is written inside mc_content and some of it needs to interact with mc_back.
how to target mc_back from inside mc_content. Using stage.mc_back or root.mc_back doesn't work and Google should be my friend, but in this particular problem, it's acting more like my enemy.
I have a MovieClip that represents a playable character in my game. Inside of that MovieClip are three frames: One containing a single picture (standing), one containing a second MovieClip (walking) and the last containing a third MovieClip (jumping). Using the Properties tab, I gave each of the frames a name ("Stand", "Walk" and "Jump respectively).
What I want to do with Actionscript is gotoAndStop the "Jump" frame inside my character's MovieClip, and play the first frame of the MovieClip contained in that "Jump" frame. Something like this:
ActionScript Code:
playerMovieClip.gotoAndStop("Jump").gotoAndPlay(1);
Is it possible to make a call from inside a MC to change a frame on the main stage (IE: scene 1 frame 2) rather than just frames within the MC? I've already tried going gotoAndStop("1,2") but that seemed to do jack.
View 1 RepliesI am using Flash MX 2004, aka Flash 7, and Actionscript 1. What I have is a movie clip that plays on frame one. Its a variation of loading screen. What I want to do is make it so that when the movie clip is on its last frame (frame 100), then it switches to frame 2. NOT frame 2 of the movie clip, but frame 2 of the overall project.
Code:
if (_root.loader._currentframe == 100) {
_root.gotoAndPlay(2);
}
(movie clip is called loader)
I have also tried naming frame 2 "finishedLoading" and just "2", but it still will not go.What happens is, when the movie clip animation is finished and on frame 100, it just sits there. I had to put a stop(); in frame 1 so that the animation could play, but it stays stopped. This was all done after I tried the logical approach where inside of the movie clip on frame 100 of the movie clip, I made an "Actions" layer and on frame 100 keyframe, I put:
Code:
gotoAndPlay(2);
I also tried
Code:
gotoAndPlay("finishedLoading");
and
Code:
gotoAndPlay("2");
I have even resorted to the last resort. I put tried to make a variable so that when the movie clip is on frame 100, that "var finishedLoading" would be set to true, and then:
Code:
if (finishedLoading == true) {
//
}
Inside of the comment would be gotoAndPlay(x);
What do I have to do to get the button to work? I view the swf and there is no active button.
�
I need the button inside the clip to be active.
I created "symbol1" movie clip. And I have dynamic text "myscore" on the main stage.
I have this code inside of "symbol1".
mybutton.addEventListener(MouseEvent.CLICK, b1);
function b1(event:MouseEvent):void {
myscore.text = "30";
}
And it gives me this error. (1120: Access of undefined property myscore.)
It works only when text and actionscript inside of the same symbol. I tried like this root.myscore.text = "30"; but it still doesn't work.
is there any way I can link a button inside a MC on frame1 to a frame inside another MC that is located on another frame.Ive got 2 frames in total. On the first frame Ive got an Mc and inside this one Ive got a button that needs to be linked to frame number 50 which is inside a MC located on frame number 2.
View 1 RepliesI'm trying to reference a specific frame inside a MC in my .swf file from an .as file. What I want is to capture the current frame of the movie clip for the .as file. It's for the purpose of points when you shoot each plane. It's an easy trick of frame 1's plane would be worth 100 points, frame 2's plane 200 points, etc. I thought I'd write a line like this in my collision detection section of my .as file.
Code:
planePoints = currentFrame * 100;
The only problem is, of course, it grabs the current frame of the main .swf timeline that my flash file uses, and not the movieclip that's being called to produce the planes. So I thought I'd be able to specify a path to the movie clip (in this case it's called Airplane in the MC's linkage properties).
Code:
planePoints = Airplane.currentFrame * 100;
Then, of course, it freaks out and says that 'access of possibly undefined property currentFrame through a reference with static type Class.'
I still get confused with AS3 and the way items are handled vs AS2. I've lost track of how many times I type _root. Am I getting something basic mucked up here or should I be importing something in the package to get it to recognize the class?
I have a time line with 2 frames only. On frame 1 I have a Movie Clip that contains a gallery and its called "gal1" on frame 2 I have another Movie clip called "gal2". Now I have 2 buttons to call each of these galleries which this code in them[code]...
But when I am in gal1 and I want to click on the second botton to call gal2 with the same exact code attached to button2, it doesn't work!
hi i am having trouble getting my buttons to work right in flash cs4. is it possible to have a button gotoandplay a frame inside a different movieclip? if so how?
View 2 RepliesPossible Duplicate: currentFrame of root timeline from inside object In flash with as3.0, I have to call a function on the main stage from a movieClip I have this method in a frame on my scene:
[Code]...
and I would like to be able to call that method from within a movieClip, how do I point to the method?
How do you target a certain frame number/name from outside of that specific movieclip?
Code:
whoweare.addEventListener(MouseEvent.CLICK, whoweareClick);
function whoweareClick(event:MouseEvent):void{
gotoAndPlay("whoweare");
}
I'm assuming it's something with the gotoAndPlay function... but I've tried numerous things with that and nothing is working.
I have a MovieClip that I want the user to be able to drag inside the stage, but I don't want it to be able to move outside the stage. Currently I'm using this._parent.startDrag(); to allow the MC to be dragged, but I don't know how to stop it from being dragged outside the frame.
View 1 RepliesHow do I connect to the same class from the stage as well as from inside a MovieClip?
In other words: I've set a document class in my properties panel - I cannot access the class's methods from inside an MC. Why?
What are the different ways to connect a fla-file to a class (as-file)?
I've been playing around with AS3 for a few years now, but always avoided classes. But now the day has come for me to finally trying to get a hold of it.
How do I reference to a Movieclip on the stage from inside a Class.as?
View 1 RepliesI've been working on a new issue while giving a break on cracking the other one.I have a movie clip acting as a button with rollover/rollout animation- we'll call it menu_mc for simple reference.I'm basically creating a rollover submenu. I've set it up a few different ways but the most user friendly has been hiding the submenu_mc (which has 4 linked buttons to root frame inside) by doing:_root.sub5_mc._visible = false;then inside the menu_mc with the rollover I have the submenu trigger set to show: _root.sub5_mc._visible = true;The links are working fine but the problem I am running into, is that the rollover state, once over the submenu_mc, does the rollout function and leaves the submenu_mc hanging there by itself- still functioning perfectly.You can go back over the menu_mc and it will play out the rollover again.On the other simple animated buttons (which do not have submenus) I have coded:
on(rollOver) {
_root.sub5_mc._visible = false;
}
[code].....
I have several website pages set up on different frames inside the content (which is a movieclip) of the home page - which is on frame 1 of the main timeline. The content movieclip name is contentMc.
My About page is at frame 10. There is a button on this page (called btnAbout_contactpg) that I want to make jump to my Contact page (frame 50) - all of which is nested under the main contentMc movieclip.
This is the pathway on my contentMc (where all of my pages are located), just in case that doesn't make sense: [URL]
I have looked at several different instructions online, but none of them seem to work.
EDIT:
I am also trying to get a button on my gallery page to load an external image, but it is not recognizing where the button is either:
btnGallery_1.addEventListener (MouseEvent.CLICK, showPic1);
function showPic1 (e:MouseEvent) {
var target:Object=e.target;
var parent=target.parent;
my_loader.load(new URLRequest("image-0.jpg"));
}
I make a website. First I have a frame with a movieclip, where my entire page is within.Inside of that is where all of my pages is in different frames, and in each of these frames there are other movieclips with content. My example:Top level /Entire site/My pages, in different frames /Movies/Pictures/About/Etc./Content (inside the "Movies") /Info about movies/Movie one/Movie two/Etc./My problem is as easy as this: I will link from the "My pages" level, to the first frame in "Content" (info about movies)If i just link to the, "Movies" frame, I can't get from "Movie One" to Info about movies by pressing the button, wich lies on the "My pages" Level.
View 4 Replies