Is it possible to make a call from inside a MC to change a frame on the main stage (IE: scene 1 frame 2) rather than just frames within the MC? I've already tried going gotoAndStop("1,2") but that seemed to do jack.
View 1 RepliesI have a movieclip and within it is a bit of actionscript and a couple of different movieclips to make it function like the button on a ball point pen (you click it and it stays clicked until you click it again).[code]...
I don't want to get deeper into this monster of a project without making sure this is working first. Is my boolean working and just my trace statements aren't worded right or is my method to change the boolean wrong?
How Do I Change Stage Frame From Inside MovieClip?
Heres my code so far:
hh.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
function fl_MouseClickHandler(event:MouseEvent):void{ gotoAndStop(2);}
i tried (root).gotoAndStop(2); but i got an error , #1061 ..
this website I'm designing loads swfs. inside one of these loaded swfs is a button that is supposed to remove the loader child from the stage and load a page in the main swf. How would I go about scripting that without using OOP? or is there a short external class I can create?
View 2 RepliesI'm having a bit of a hard time with calling a function in the main timeline through a button in a movieclip. The mc is in the main timeline and in it I added a button with this.removeMovieClip(); and so far it works, but when I try to call a function from the main timeline it just doesn't seem to work.
View 13 RepliesOn the main timeline I have a movie clip called clock_mc and playBtn playBtn is placed in the center of clock_mc When you press playBtn clock_mc starts playing
playBtn.addEventListener(MouseEvent.CLICK, playClock);
function playClock(event:MouseEvent):void
{
if (event.target == playBtn)
[Code].....
I've tryed to placed the replayBtn on the stage on the main timeline and I've set it up to replayBtn.visible = false; And then I add replayBtn.visible = true; to last AS frame of clock_mc but it wont work Even when I put the button physically to the last frame of clock_mc it will not work either.
I have a main application that contains a list, using a custom itemRenderer to display data.
I would like to be able to call a function, inside the itemRenderer, from the main application.
When running the app, we have a list with three persons, and a button. I want to call the function myItemRendererFunction() inside the itemRenderer, of the selected item in the list, all this, from the main app.
[Code]...
I'm having some trouble finishing an interface i'm working on,the function indica() adds a menu listing of items (indicadores) inside a mask because its too large, and i added a scrollbar that allows to scroll through the items but now i need to add the buttons inside the movie clip indicative,i can add symbols and buttons, but i'm having trouble having them call functions inside the same class that the function indica() is running.[code]
View 2 RepliesI'm a newbie to Flash. I'm learning how to create a flash based image gallery. How to call images from a folder to the main stage and animate the image to show for 1 second and the change to the next image as a slideshow in a loop. This is the home page of the gallery.
View 6 RepliesI have to call a function that is defined on the main stage of my project, and I have to call it from a MovieClip
View 3 Replies1. I make a simple movie (call it movieClip) first frame has stop(); action, second frame has label playMovie, last frame has action gotoAndPlay(2); (so that movie not stop anymore2. Now I place movieClip on stage3. Question... what is code to make movieClip play frame label playMovie?
I already try to put many different type action in frame one of stage
this.movieClip.gotoAndPlay("2"); //NOT WORK
this.movieClip.gotoAndPlay(2); //NOT WORK
[code].....
i created lil bit complex button (for me ) and i want to use that button lets say 6 times, but what i want is every other button have different text.i tried everything and i failed, ill attach my .FLA a quick explanation:i have master mc_homeContainer,when u enter there is a label called btn text,when u enter in that button text u r now in sprite 58.in that sprite i want to but 6 keframes and each to contain different text. lets say keyframe 1 is home, keyframe 2 is about us etc.and then how can i call that text when i put 6 instances of mc_homecontainer to main stage.WOW i complicated all
View 14 RepliesI created "symbol1" movie clip. And I have dynamic text "myscore" on the main stage.
I have this code inside of "symbol1".
mybutton.addEventListener(MouseEvent.CLICK, b1);
function b1(event:MouseEvent):void {
myscore.text = "30";
}
And it gives me this error. (1120: Access of undefined property myscore.)
It works only when text and actionscript inside of the same symbol. I tried like this root.myscore.text = "30"; but it still doesn't work.
Possible Duplicate: currentFrame of root timeline from inside object In flash with as3.0, I have to call a function on the main stage from a movieClip I have this method in a frame on my scene:
[Code]...
and I would like to be able to call that method from within a movieClip, how do I point to the method?
How to call stage variables inside movieClips
View 1 Repliesas the title says i am having two movie clips on main stage one called "land" and other called "char" inside "char" MC i have another MC called "ht1" i want to make hitTest between "ht1" and "land" but everything seems to fail, i've tried using _root, _parent?
View 3 RepliesI have a scrollPane on my stage, and I have a movieClip inside of it with a bunch of buttons. When you click on one of the buttons, I need it to gotoAndPlay a frame label on the main timeline. So far I cannot get this to work.
View 6 RepliesAm gonna create an encyclopedia program, consist many of Chapter. I have difficulties about controlling external swf inside my Main swf. This is my Main.as in Actionscript 3
public class utama extends MovieClip {
var loader:Loader;
var urlReq:URLRequest;[code]........
Am using eksternal page as a Chapter, and A Chapter consist of many Pages (it using Scene)
For an example :
Chapter 1 --> Page 1 it will be represented as hal1.swf-->Scene 1
Chapter 1 --> Page 2 it will be represented as hal1.swf-->Scene 2
Now, How to control it, I still didn't get it ??
I make a website. First I have a frame with a movieclip, where my entire page is within.Inside of that is where all of my pages is in different frames, and in each of these frames there are other movieclips with content. My example:Top level /Entire site/My pages, in different frames /Movies/Pictures/About/Etc./Content (inside the "Movies") /Info about movies/Movie one/Movie two/Etc./My problem is as easy as this: I will link from the "My pages" level, to the first frame in "Content" (info about movies)If i just link to the, "Movies" frame, I can't get from "Movie One" to Info about movies by pressing the button, wich lies on the "My pages" Level.
View 4 RepliesI am working on AS3 and I have a created a button class which have an off state and on state. I did the class and it works fine, but i need a little fine tuning. Right now I am polling the button state from the root(main timeline) by checking a boolean property in the button class. I feel it is quite inefficient to check the button state on every enterFrame event of the main timeline. Rather I would prefer the button to tell the root time line by invoking a function written in the root, whenever a state change occurs. t should be cleaner , right?? But when I try to access a function in the root which goes like this
[Code]...
I think what I am looking for is a random action script. I want to make a swf (mainmovie.swf) that would call up random swfs. What would be ideal is that every time the person goes to the site a different file is called up out of the files I created. So what I have done is put my (mainmovie.swf) into a folder with all of the other swf files I want to be random. It does not need to load to any specific level or anything it could even just replace the original move (mainmovie.swf) what ever is the easiest.
View 5 RepliesI have an animation (movieclipX) on frame 2 of main timeline. At the end of movieclipX I'd like the main timeline to move to the next frame, frame 3. How can I do this??Sorry if this is an easy question, I'm in the process of learning.
View 8 RepliesOn the main stage I have a button that I have made invisible once the file is loaded. Inside a movieclip I have on frame 15 the following actionscript 3 code
button_mc.visible = true;
I want the button to become visible at the end of this movieclip. I am not using an external as3 file, I am putting the as3 code in its own layer on the first frame.
I know it has something to do with the path to the button, but I cannot figure it out. If there is anyone who can point me in the right direction for referencing instances by instance name that reside on the main satge from inside a movieclip
I'm working on a lot of different flash applications Most of those applications are visual and involves the main stage.I started oop a while ago and i got to a point that %99.9 percent of my code is extracted to different classes.There is one thing that repeat on a regular basis on all of my apps, passing the Stage variable to the different classes....It's working great but it doesnt feel right that i need to pass the main stage as a variable between the different classes,is there a better way to access the stage from external classes ? can i make the main stage a static property and access itwithin all the objects in the application ?
View 1 RepliesI have a movieclip and within it is a bit of actionscript and a couple of different movieclips to make it function like the button on a ball point pen (you click it and it stays clicked until you click it again).
var booleanClick:Boolean = false;
var colorTransform:ColorTransform = optBox.transform.colorTransform;
optHitState.addEventListener(MouseEvent.CLICK, onClickHandler);
function onClickHandler(myEvent:MouseEvent){
[Code].....
I don't want to get deeper into this monster of a project without making sure this is working first. Is my boolean working and just my trace statements aren't worded right or is my method to change the boolean wrong?
I made an RPG, and I'm trying to make the movie itself go to the second/next frame. But whenever I try to do that, nothing happens at all. I tried _level0.gotoAndStop(2) and _root.gotoAndStop(2), both on a frame and on a movie clip.
It's suppose to initiate this function once a certain variable (_root.numbers) reaches 20, and I've tested if the variable does reach 20 by doing other things.
I have a movieClip named MC, and it's enabled with action script, with the class name MC_Rectangle and a Stage.I override the MC_Rectangle class file in a mc_rectangle.as external file.here is the code:
package{
import flash.display.*;
import flash.events.*;[ code].....
I have new a object in the main stage var
mc_rect:MC_Rectangle = new MC_Rectangle()
in main stage:
1. how can i access the variable "sequence" in "mc_rect"
2. how can i pass parametre from main stage to mc_rect via function setSequence(data:int)?
3. how can i call the function in addSequence() in mc_rect.
in asp.net, i usually use mc_rect.sequenct,mc_rect.setSequence(data), mc_rect.addSequence() to achieve my goals......btw, can function in mc_rect return out result to main stage?
Ok so I have a function (loadthm1) on frame 1 of the main time line. I want to call it from inside a movie clip as the playhead passes a frame. In as2 I could just say _parent or _root.functionName(); but in as3 I get a undefined method error. How do I point to the function and call it?
ActionScript Code:
var thmLoader1:Loader;
function loadthm1(url:String):void {
[Code]...
how to jump to a certain frame number / frame label inside a movie clip on the main time line (ROOT) from ANOTHER movie clip elsewhere. Any ideas?
View 1 Repliesis it possible to create a class within the main timeline? is there a way to get around it?what am trying to do is to bring my class inside my main fla file, rather than importing it.
View 6 Replies