ActionScript 2.0 :: Control Multiple Movie Clips Simultaneously?
Mar 15, 2010
Here's the issue. I have a movie with 8 different movie clips on the stage. Each one is just a simple animation with a button. When the movie runs, all the movie clips run their respective animations until they hit a stop action in the middle. The stop basically seperates the intro from the outro of each clip. Once the user clicks a button, I want all of the other movie clips to start playing again and then load the next movie, depending on which button was clicked. So the button AS, in plain english speak, would be something like this:onRelease, make movie clips a, b and c play then load movieXYZ.swf to main stage.
View 1 Replies
Similar Posts:
May 15, 2009
I have 6 movies that i need controling. These are named hex1, hex2, hex3 etc. When the file opens i have some action script that needs to run something like this:
while (i<7) {
hex[i].gotoAndStop(1);
i=i+1;
[code].....
View 1 Replies
Mar 11, 2010
I have five videos playing at the same time in a .swf. They are each .flv files of the exact same length, I'm keeping them external rather than embedding the files within the Flash, and it's imperative that they each play at the exact same time so I'm avoiding using streaming.They all need to be kept at the same time code as any other of the movies at any given time. Is it possible to make a scrubber or other controls that will allow the viewer to move positions within these videos simultaneously?
View 1 Replies
Jul 30, 2010
How can I add a single control bar to control 2 external FLVs inserted in FLA document so that when scrolled, both FLVs move simultaneously?Is there a better PPT to Video Converter out there than Moyea that I can purchase or even a freeware? Original documents One FLV is a PowerPoint presentation with videos in some slides, converted into FLV using trial version of Moyea PPT to Video ConverterAnother one is an AVI converted into FLV using Super
I saw a similar question posted on Aug 15, 2007 ([URL].. but the "Look Here" link that describes the solution is not available (removed by Adobe for security reasons).
View 19 Replies
Aug 17, 2010
I have 4 live f4vs that I'm using with interactive server 3.5. Thus they are running in dvr. I'm trying to find a way to control all 4 videos so that when you go back on one video all 4 videos go back to the same time. This is very important with camera 4 as it is the only one with sound.I have tried putting all 4 videos in one swf file and I have tried putting each video as its own swf.
View 11 Replies
Sep 13, 2009
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
View 1 Replies
Jul 15, 2009
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 Replies
Jun 2, 2004
How to get mass speed movement like in this intro site. [URL]. How to control the multiple clip mass speed movement....using actionscript.
View 12 Replies
Oct 15, 2010
The movie was designed in several flash files, each has been combined into a single movie clip and then all the movie clips have been moved into the master document.
Each movie clip is on a single slide.
They play through and when a clip reached the end I have used the actionscript root.gotoAndPlay(x) where x is the slide number of the next clip in the sequence as such my timeline looks like this[code]...
View 1 Replies
Sep 8, 2009
I have this code to use to pause animations in different areas of a .fla, for each pause I have been copying this and changing the "var timelinePause" and other items as shown after the original code, is repeating this code for each pause just junk code? is there something else from this that I can use to pause?
[Code]...
View 8 Replies
Jan 11, 2009
This is quite complex, in simple English, I have some folders (mc's) which I need to enter the stage when a button is clicked, when a different button is clicked I need the previous folders to animate out, before the new ones animate in! The folders feature there own functions and animations, which are viewable when clicked (they bring in external imagery and text)?
View 3 Replies
Jun 30, 2009
I want to control elements and movie clips from deep within an another movie clip
for example I have a button inside of a movie clip � So
_root > Symbol 1 > Symbol 2 ( Symbol 2 is the button )
Now I have another MC on the main stage that has an animated MC in it.
So
_root > Symbol 3 > Symbol 4 ( Symbol 4 is the animated item )
So now lets say I want to be able to click ( or rollover ) on the button ( Symbol 2 ) for the animation to go to a specific frame and play
I have this all the time where I am struggling to control stuff deep within from other stuff deep within an MC.
View 1 Replies
Apr 28, 2009
I have five moive clips in the main timeline starting from the first keyframe: intro, mc2, mc3, mc4, and mc5. I want to have a "previous" and "next" button on each frame (a different layer) to be able to go to a previous or next movie clip in the timeline.when I clicked "test moive" (without any ActionScripts), it always skipped the movie clip in the first keyframe and sometimes it did so to the second keyframed too.
View 2 Replies
Apr 5, 2011
how to imitate a reflection of a movie clip in a "mirror." I don't know if I should have the initial movie clip on custom cursor or have it set to drag... but either way I don't know how to make the second clip the "reflection follow along. Obviously it would need to follow at a slightly offset pattern so that you would be able to see both clips (or majority of them) at the same time. It's for a school project that is due at 9am tomorrow so time is of the essence!!
View 4 Replies
Mar 11, 2010
I was wondering about the flexability of loading movies into a movie clip. Currently, I am well able to load one movie into a movie "loader" clip, but thought maybe there is a way to load additional movie clips into that same "loader" clip, as i am starting to accumulate several different graphics that i need to have be inside movie clips so that i can make them change colors on the same frame when needed.
i shot from the hip and tried this code, but didnt have any luck:
mc_LCD_loader.attachMovie("hilight", "g", 1), ("header", "X", 1); mc_LCD_loader.g._x = 0; mc_LCD_loader.g._y = 1000;
mc_LCD_loader.X._x = 0; mc_LCD_loader.X._y = 1000;
[Code]....
View 9 Replies
Feb 18, 2011
I have created a series of Symbol MovieClips which I load through ActionScript on the first frame of the main timeline so that they play sequentially. I dynamically create each MovieClip, add it to the Stage, and setup an enter frame listener.On the last frame I stop and remove the clip, and repeat the process with the next clip.These animations play sequentially as intended. However each clip has an audio sequence on its timeline.These play simultaneously at the start of the main timeline.I've tried each of the Sound Sync options on the first frames within the Symbol clips.With the Stop setting the audio doesn't play, but Start, Event, and Stream all cause the audio to play at the beginning of the main timeline which seems to contradict the documentation I've looked at.
Is there a straight-forward way to sync the audio to the Symbol clips, or does the audio need to placed on the main timeline?I'd rather not do this as it is much easier to sync up the audio for each symbol clip with the animation when I can work with the smaller audio snippets and not have to test the whole movie.
View 7 Replies
Jun 21, 2011
I'm having some trouble following this (link) tutorial. I'm new to flash, so please bear with me.
In step 1 of this tutorial, we have created multiple movie clips and then a single big movie clip(including all the movie clips).
In step 4, I'm not able to access the properties of the clips we created earlier by using the following code, like in the tutorial.
[Code]...
View 3 Replies
Jan 2, 2010
Is it necessary to unload Movies in Flash, or can I keep multiple movies loaded simultaneously? Are there memory requirements that make it necessary to limit the number of Flash movies loaded at one time?
View 1 Replies
Oct 22, 2007
I really hope someone can help me with this one! I've been trying to loop several embedded flv files in one flash document. I've found some really useful script that works when applied to one flv file in the document, however I don't really know how to adjust the actionscript so that it applies to the other three flv files on the page.[code]
View 2 Replies
Nov 18, 2010
I have 3 external swfs which I load into a mainmovie. I need to preload them to make sure they start at the same time. I just need a super basic preloader, but it needs to load all 3 swf and once loaded, start
View 13 Replies
Feb 16, 2009
Is there a better way hiding mutiple mc's than this?
button1.onPress = function(){
first_mc._visible = false;
second_mc._visible = false;
third_mc._visible = false;
}
What I think I want to do is make an array of the movie clips and apply the function to that array?
View 3 Replies
Apr 1, 2011
I'm working on a project where in I've found it necessary to mask a background object with MULTIPLE Sprites. I've tried doing this two ways: making one "parent" sprite to which all of the other masks are childed; adding them as individual masks.
The composite strategy just sort of gave up, Flash doesn't seem to like having to search through it's render tree to do these things and the result was no visible mask or masking (just the full background image). The latter strategy failed for obvious reasons: saying Sprite.mask = so-and-so implies that setting it again will overwrite the last mask.
Is there any way to use the composite strategy? Or is there a way I can copy over all of my sprites and draw them directly into one new sprite on every frame?
View 3 Replies
Nov 5, 2008
I'm building a website where i have 9 thumbnails on the maintime lineWhat i want to achieve is to press on the thumbnail whichwill redirect to a movie clip each time fairly big in size and have apreloader for each thumb. Load the content before it enters thefirst frame of each movie clip since the content is fairly big insize.(3d animation)
View 2 Replies
Oct 28, 2008
how to load multiple movie clips on the stage? My ActionScript 3 are as below:
I declared a movie clip - "mcPhotoFrame" (i.e. an instance of "mcPhoto" movie clip) and would like to load all the pictures on the stage but after finished loading, only the last photo shows on the stage.
View 4 Replies
Aug 31, 2010
Is it possible to have multiple movie clips inside one variable? I want to be able to just use var._totalframes instead of mc1._totalframes, mc2._totalframes, etc... Or is there another way I can avoid copying and pasting dozens of movie clips over and over
View 1 Replies
Jan 24, 2011
I've created this simple birthday game where the concept is to blowout 30 candles in 15 seconds. The candles are movieclips so that when they are clicked on, they blowout. However, when the option to "try again" begins, the candles are still out.
So, how do you reset multiple movieclips?
View 3 Replies
Oct 2, 2011
I'm making a simple drag-and-drop style dress up game, and I want to know if it's possible to combine multiple movie clips on different layers so that they can be gragged as a single object in the game, but retain their seperate layers. For example, if I make a hat and I want the front part of the hat to be on a layer above the doll base's head, and the back of the hat to be on a layer behind it, but the hat has to move as a whole when dragged.
View 2 Replies
Jan 20, 2011
I am loading multiple movie clips into a scrollpaneContainer mc and setting the source of my scrollpane to be the scrollpaneContainer.
Problem is the height of the scrollpaneContainer is larger than 2880 pixels (mc height limit).
I can split the movieclips into two scrollpaneContainer clips but I am unsure how to set the source of the scrollpane to be two different movie clips at the same time.
View 1 Replies
Feb 11, 2009
How can we print only few movie clips out of 100s at the same frame and How can we change the page orientation for printing..
View 1 Replies
Sep 30, 2010
Trying to remove three movie clips from a game screen when advancing to the next stage, but the movie clips stay. I've been using removeChild (MovieClip) but its not working for all movie clips on the screen. this is my first time using flash.Heres the code I've got so far:
stop();
removeChild(hat_mc);
removeChild(vest_mc);
[code].......
View 6 Replies
