ActionScript 2.0 :: Controlong Sound In Loaded External FLV-s In Embedded Video?
Mar 12, 2011
In Flash MX 2004 Pro. I have embedded the video in which needs to load several external FLV files. These are the problem: In my main file I have a sound object (music) and then load the video when I reduce the volume of the music of the main file to 0 that the louder the sound from FLV videos. The problem is that when the music died down to 0 to mute the sound with FLV videos to 0.How to separate audio from FLV videos from sound of music and how to separately control the volume loaded FLV file?This is the code that I use:
my_nc = new NetConnection();
my_nc.connect(null);
my_ns = new NetStream(my_nc);
I have trouble in choosing between external video with playback component and embedded video . I have tried adding video to dynamic page and everything is perfect .This video I have imported using the option File ->import video -> external video with playback component. If I try to execute flv on another system , the video is not playing eventhough it is in library.
So, I have imported video using the option of embedded video and this worked fine on another systems as it embeds video. The video plays for only 2 min 54 sec. I have compressed the bit rate to how much ever I can in premier pro. It resulted in reducing the size of the file but still I see the video occupying more than 3500 frames in the timeline. I feel this is not optimal.
I have embedded a flv video onto the stage. I then have loaded in an image which is transparent enough to see the video through it. The problem is I cant now access the video player to control it. Is there anyway to bring the embedded video on the stage above the loaded in image so I can actually click play on the control bar and play the video?
I have embedded a flv video into my timeline, it uses the flv playback component to play and the SteelExternalAll.swf skin. I would like to control this flv using buttons that I have created that are postioned next to the video player. Ideally, these buttons would be thumbnails, similar to chapter thumbnails on DVDs and would serve a very similar function. As these thumbnail buttons are always present, I want them to change while the movie plays, I think a border around the currently playing would suffice.
The video is nearly 3 mins long, I have made cue points from Sorenson Squeeze.
how to grab the transparency (or alpha value) of individual pixels in an embedded or loaded video? We tried copying over a frame of video into a bitmapdata object with transparency enabled. However, even though we can "see through" the video at certain spots (indicating alpha = 0 there), the alpha value comes back as 0xFF for every single pixel in the BitmapData object.Obviously alpha data is being stored inside the embedded video, but how can I actually get that value?
I have this movie wich loads a serie of external files. On this files i have a character ( an �) that displais when you open the SWF directly, but that does NOT display when the SWF is loaded through another SWF,
I'm loading an external swf file that has some sounds in it (to the main swf). The swf contents never leave the movie but it does get pushed to the site when it's not in view.
The user can bring it back in view by pressing on a left/right button. So when it's not in view... or tweening out of view I need the sounds to stop.
Since the loaded swf is never unloaded, what should I look at to accomplish this... communicating with the loaded swf, etc?
I've got a main flash index file (fla_main.swf) which acts as a header/menu that concurrent pulls in external movies (ie, content pages) when sections are selected. There's no problem with that at all, but I do have a soundtrack control panel that is an external mov loaded in (soundctrl01.swf). There's 3 music tracks and options to stop, start, next track etc. All the usual stuff, vars loaded by "loop01.new Sound();" etc and played/stopped with the var instances. Anyway, the mov starts with loop01 playing and then allows the option to skip etc, working fine on publishing but when the fla_main loads it in theres no sound on any loops. Is this an issue with loading sound vars and external movies?
I'd like to gain read only access to the following parameters of embedded Flash videos located on sites that I do not own through my own custom browser extension/add-on:
Time location of playback head (so I can display the current time in the browser extension via HTML5/JavaScript) Frames (so I can make capture them to an image file, save it and display image in browser extension) Original Dimensions in pixels (so I can display the original video dimensions via JS/HTML5 in browser extension)
Is this possible by using Javascript and HTML5 from a browser extension?
Would I have to use something like the SWFObject Javascript API [URL]
I'm trying to preload a swf.My swf seems to be playing before it hits the 100% mark. Usually around 33% I have no idea why....the loaded swf contains a video which is playing before it's even on the stage!
ActionScript Code: stop(); var l:Loader = new Loader();
how to sequentially play external SWFs loaded into the main timeline?
I have several SWF files with short videos embedded in them. I wish to load these external SWF files into my main timeline as follows:
User Presses Button -> Play Video Clip in External SWF#1 -> Once Video Clip in External SWF#1 has Finished -> Play Video Clip in External SWF#2.
I tried achieving this by adding: var endmovie:Boolean = true; to the end of each video clip inside the external SWFs (e.g. 1.swf) then cycling through an if statement in the main timeline to see when this condition was meet:
ActionScript In Main Timeline:
Code: var mc_Loader = new MovieClipLoader(); mc_Loader.addListener(this);
[Code].....
How is the best way to go about achieving this? Am I on the right track? (By the way, using .FLV or one long external SWF file is not really an option due to long loading times...
I am trying to replace some code which loaded an external image and triggered and function once completed with code that uses and embedded image. The relevant code looks like this.
Code:
[Embed(source='globe.png')] public function Globe() { var imageLoader:Loader = new Loader();
[code]....
The commented out section is where it used to take the loaded image and apply it to a texturemap.I need to replace the lines of code in the first function with something that calls the second function correctly.
I have tried using function imageLoadComplete (e:Event = null)and calling it with imageLoadComplete(); in the first function but although it compile and runs without error, the program does not work properly. I suspect this is to do with the dispatchEvent(); line which I do not understand.
I am using a flash app. I can send and receive streaming data to FMS by using this app, like the chart I attached. [URL] This app uses RTMP to access to FMS. I want to upgrade this app to display sound level of each client. Is it possible by using Actionscript and FMS? If so, which class should I use?
I wonder if there is a way to detect if an FLV has sound embedded in it. I have various videos that I am streaming in and some have sound and some don't. Those that don't, I want to hide the volume controls and mute button and (you guessed it) those that do have sound, I want to show the volume controls, etc...
I know that I could make an extra flag in my XML file that describes the videos but I am wondering if there is any fancy pants way of using some sort of built-in, unpublished sound detection within the NetStream or NetStatus Event.
I've been sent a FLA with some voice overs in and need to edit a few words out. The original MP3 files are not available so how I can edit the voice overs in flash without the original mp3 files?
I have three btns on stage, clicking on each one i want them to load an external mp3.The problem is the previous loaded sound doesn't stop when a new one is loaded so I have all sounds playing at the same time
I have a simple MP3 file that I am attaching from a library and playing using Sound object.When testing SWF on it's own, it works fine, but I have to embed the SWF into another SWF (container) using loadMovie, AND, the sound not playing??? What can be wrong?
child.swf code: var mySound:Sound = new Sound(); // in the library MP3 is set for export as "voiceoverclip"
From the Sound Class information, it says to use the SoundMixer Class to handle embedded Sound Files. I have two sound files embedded, that I have setup in 2 separate layers, starting at frame one in the main timeline. I needed to do this so I could see the wave files, and coordinate text with the waves. I do not want to load these files into the .swf file at runtime using URLRequest. How do I get a handle on those as they exist, to make each controllable by separate volume and mute controls for each sound?
This will be a challenging question, because, "it can't be done" doesn't work for me. I managed to create a way to use an external classfile to control the main timeline, the ROOT timeline, without having to create a sub movie to root. I can use my component to call play(); as though it were in code in a frame. But it isn't, it's in an external classfile. I passed root to the classfile and told the classfile to think of it as a movieclip - that put the handle on it. I tried similar way with root as a Sound, but that isn't detailed enough - I need to get a handle on the frame that contains the embedded sound file. I embedded, attached it, using the properties view for the frame.
I've attached, or whatever you want to call it, these sound files to a frame, and this frame is or should be attached to the layer I've created. So, under the assumption that the ROOT has everything attached to it in some manner (it is after all the foundation for the COM), the stage of the root contains the visual components, so ROOT has to have the layer objects attached to it, which should have the frame objects attached to the layers. I have two layers that each have a .wav file attached to frame one. Somehow Flash keeps track of that - I want to know how Flash does it so I can read what flash reads.
Searching for how to change the volume of sounds, I always get this irritating snd=new Sound(URLRequest), followed by snd.setVolume(val). Oh, fine, but my sound is not an URLRequest, it's an embed.
I've made a lot of random attempts (1) to no avail. How am I supposed to do that instead?
(1) including casting my class to Sound, creating a Sound with the embed class as argument, creating a SoundTransform and setting it to the channel, etc.
Is there any way we can stop the sound embeded in timeline directly?
We have an application that load SWF dynamically. These external SWF are not created by our company and other company has embed the sound in timeline. without use of any actionscript or anything.
Now we need to provide the MUTE option for our user, is there any way We can simply disable all kind of sound in any mode from our ActionScript code.
I have a website [URL] when I go there if I click the video archives button then play a video then click on the home or photos button or one of the alternate background buttons on the left the video goes away as it should but not always the audio (especially when I click while the video is still buffering). Is there a command I can use to kill the sound from the flvPlayback component and nothing else(I have a mp3 player there also I so I don't want to use the SoundMatrix class. btw the videos are all played on an instance of the flvPlayback component.
I have an AS3 video player I've put together using fairly standard Netstream method and it plays my flv's fine. The problem is, the sound quality varies wildly depending on who is looking at it. When I test locally, the audio in the video is fine, but on a windows machine it goes horrifically loud to the point of distortion, also the client (outside the UK) has said it sounds fine to them, so It appears to be only happening here.
I need to produce a photo review show (basically, a photo slide show), which incorporates still photography, and numerous video clips. We will have music playing in the background (not on the timeline - in the actionscript). The full presentation will run automatically - no user interaction, and therefore, I need the background music to automatically fade out when the video starts, and then fade back in when the video ends.
1. Is Flash CS5 the correct software to do this in?
2. code to tell the sound to fade out when the video starts, and fade back in when the video ends?
